confused about source and external code path

Similar Questions

• Confused about source logical table

  Hello
  
  I'm confused about logical table source (LTS), there is 'General', 'Column mapping', 'Content' tabs in
  LTS, tab in general, there is some information, as the "tables map it" and "attached,"
  
  right here, we have created relationships in the physical layer and layer MDB, then I would ask what is the use of the "joins" here?

  Yes, but you can use between logical and logical Dim in MDB. What happens if you must define between tables that is not exposed to the MDB and you want to use non-exposed tables of MDB? Or when you go for the design of a snowflake in MDB? or a very good example is when you want a table always appear in physics SQL even when its corresponding collar is not used in the report criteria... Here are some scenarios above.

• Confused about hard drives external and ExpressCache 1.3.0 - Important.

  Hi Slotmosta, George and GLS,

  I'm a little confused...

  I thought that 1.3.0 is supposeed to defragment only SATA disks (this should be an option!)?

  I thought that the USB devices must eject normally - wasn't this problem?

  When comes out the next ExpressCache software and * that * he will really be in trouble?

  Kindly let me know.

  TNX,

  Compumind

  It does not seem that this problem is related to defragment.

  http://forums.SanDisk.com/T5/SanDisk-ReadyCache-SSD/please-add-defrag-control-in-next-version-of-CAC...

• WebWorks and external cod

  Hi all

  I am trying to add a 3rd lib in my webworks app, but there is a problem. The pots contain .classes (stub methods, I think) and cod. I followed this guide and I've successfully compiled everything. However, after activating the signtool gui, I see that RIMAPPSA2 signatures are needed. I can install the application on my device, but then I get the error "cannot call native method.

  I was already able to encode a moped with these libs. They are properly signed by the seller. Environmental jde, I only need to add them to the path of building and then, after the signing of the output files, I simply add their COD through UpdateJad.

  No clue on how to solve it in webworks?

  THX

  Hello
  I'm not registered any missing key. Just adding my pots as shown in guide, seems to force the signtool to sign. So my solution is as follows: I removed the jars, but I left the tag dependency in the library.xml as shown (not sure if it's really necessary)
  I saw that bbwp basically reconditions everything and that what he calls the CAP. In the main folder webworks, I found a file named bbwp.properties. I added my pots in the import after the net_rim_api tag, using the ';' as the delimiter.
  After compiling, I used the updateJad tool to add cod of the 3rd party or external modules in my application.
  And it worked

• Tecra A2: Question about DVI and external monitor

  Hello
  I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
  Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

  Thank you
  Ralph Menon

  Hello Ralph

  Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

  The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

  Good bye

• Confused about first and GTX 980Ti

  Hello

  leave me perplexed by effects of acceleration @GPU as Lumetri and cuda support first 2015,

  I update my GTX 570 to GTX 980Ti

  with GTX 570, I add a Lumetri effect to a clip and make a correction when I play back I get

  loss of images, first use 90% of the power of the GTX 570 GPU

  with the GTX 980Ti, I played the same music with the same effect of Lumetri and big no. dropped

  framework, but when I add another effect of Lumetri for the same clip I dropped frames and

  noticed that first use only 33% of the power of GTX 980Ti

  I have try other effects of GPU acceleration as the path curves, color correction 3 quick color correction RGB, luma curve, once the first reach 33% the power of GTX 980Ti the loss of images begins

  DaVinci Resolve I add several nodes of correction and amazing job with 97% of the power of GTX 980Ti

  I know that the deprecated 980Ti GPU GTX, but I also know that Quadro M6000 is recommended GPU, and both are using Maxwell GPU GM200

  Quadro M6000 is based on Maxwell GPU GM200

  GeForce GTX 980Ti comes from Maxwell GPU GM200

  Why first using only 33% of the power of 980Ti GTX?

  Is there any thing I can do to let the first using 100% of the power of 980Ti GTX?

  If I can replace GTX 980Ti Quadro M6000 will I get first with 100% of the power of Quadro M6000? and why?

  my system:

  Windows 10 company

  ASUS X 99-A

  I7 - 5820K

  16 GB of Ram

  4 x 2 TB 7200 RPM hard drive Raid 0

  GTX GPU 6 GB 980Ti

  Intensity of DeckLink Pro 4 k

  First 2015.2

  the project setting and all my clips are HD1080 50i uncompresed 10-bit

  Thank you

  Hello

  I found the answer to my question on the addition of 2 Lumetri

  "The Lumetri panel design is precisely to be a simple and easy interface that serves up and down tabs and in one case by video. What was said on the official blog of PrPro & what they said events such as the great NAB show in Las Vegas, I don't think they intend to go further with it. So "does not work" is not really applicable, it is not designed or intended for the way you want it to run. »

  Re: Lumetri: two and more the effects of Lumetri on a clip

  read the entire thread to understand the effect of Lumetri and knowing the limitation in the deal with

  Thanks to all who tried to help

• Very CONFUSED about invalidation and last_load_time from v$ sql.

  Hi all.
  
  I'm very confused on the definitions of column of v$ sql.
  The oracle is envirenment 10.2.0.4 RAC 3-node.
  
  The following comes from gv$ sql.
  
  --------------
  INST_ID select sql_id, child_number out.
  hash_value, plan_hash_value,
  first_load_time, last_load_time, loads, invalidations
  SGS $ t sql
  where 1 = 1
  and sql_id = "5hnvqby4tyvt9."
  /
  
  1 5hnvqby4tyvt9 0 2308927273 1898129466 2011-07-17/07: 45:00 2011-07-17/07: 45:00 1-0
  2 5hnvqby4tyvt9 0 2308927273 1898129466 2011-07-17/07: 51:18 2011-07-25/06: 9 1 30:07
  
  ---------------
  1. no changes are object-definition related to the tables in the query of '5hnvqby4tyvt9 '.
  
  2. currently, the sql in the nodes 1 and 2 has the same PLAN_HASH_VALUE.
  
  3. in nodes 1 and 2, the sql has been loaded in the library cache,
  2011-07-17/07: 45:00 and 2011-07-17/07: 51:18 respectively.
  
  4. However, last_load_time differs from the other.
  -the node 1: last_load_time is ' 2011-07-17/07: 45:00 ' and invalidations is 0.
  -node 2: last_load_time's ' 2011-07-25/06: 30:07 ' and invalidations is 9.
  
  ---------------
  
  My question is:
  
  1. What is the difference in last_load_time between node 1 and node 2?
  
  2. What is the difference made in disqualifications between node 1 and node 2?
  
  3 I know, that when it changed the definition of table, sql cursor becomes invalid.
  However, there was no change in the definitions of the query table.
  
  What could make a child cursor in the cache library not valid?
  
  4. According to the manual of oracle
  (http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2113.htm#REFRN30246),
  
  LAST_LOAD_TIME means 'time in which the query plan (memory segment 6) has been loaded in the library cache'
  
  However, the plan_hash_value 1-node and node-2 has the same value,
  even if the child in node-2 sql cursor has been re-charge 9 times since the first loading in the library cache.
  
  What it means?
  
  ------
  
  Thanks in advance.
  Best regards.

  869578 wrote:

  parts of the cursor (mainly the lot 6, the execution plan) can age due to pressure of space

  When 'PARTS' of a cursor has become aged because of the pressure of space,
  It increases the number of invalidation count(v$sql)?

  Yes.

  In addition, in the case above (parts of a cursor have become aged because of the pressure of space in the library cache),
  the update of last_load_time(v$sql) does not always mean "sql plan of change."

  Is this good?

  Hmmm, let me think for a moment. I think it's always true when we see invalidations, it's the SQL Plan, which has been invalidated. This is not to say that the plan changed, however. You could get a plan struck down for trivial reasons, say, a grant or revoke them on a table. After that, on reload, the plan that is generated can be identical to the regime that had just been invalidated.

  Hope that helps,

  -Mark

• Confused about PPP and the size of the final image

  I'm new to Lightroom that are a lot and I try to understand how Lightroom uses pixels and determines the size of an image with a magnifying glass.  My RAW images are 3872 x 2592, 10.2 million pixels.  For a magnifying glass, I suppose Lightroom chooses a PPD that corresponds to my monitor for options FIT or FILL.  But how it determines the size of the image to display when you use a report of zoom, say 1:1.  I feel that 1:1 is the size of the actual image.  But what is this size?  When I use 1:1, the preview in the Navigator Panel displays a zoom that is only about 1/9th of the image in the center of the image.  Is it just defaults to 72 DPI for the ratio 1:1 zoom displayed or is - it something else? Another related question is what Lightroom when I export an image of say 300 PPI and resize the image to a size that would be greater than the number available pixels at 300 PPI?  Just asked for my RAW images, 300 DPI can support only 8.6 x 12.99 inches.  What's Lightroom if I select 20 x 30 inches and 300 PPI?

  Thanks, Mike

  DPI is Dot Per Inch. A printer can take a 300 PPI image, and for each pixel, it could drop 4 points, meaning that the 300 PPI image when printing is 1200 dpi, but really I never worry about DPI. And you shouldn't worry about DPI either.

• Confused about BB10 and BES PUsh

  Hello world

  Today, our application side server is an HTTP Post to a preconfigured URL of BES and is capable of pushing an icon for a BB5, device 6 or 7 without any problems. The application server-side is not Java based and simply use an HTTP Post to make the push. Everything is fine and our clients are happy :-)

  Now eagerly BB10, it seems that things have become much more complex.  Here's my understanding:

  1 BES and MDS will not apply to BB10 devices since these devices will use the new service COMICS. This service will have an interface of type MDS, so we can do a big boost to the unit in question?

  1a. If not, how can we push the BB10 device?

  1. b do we not have to write some kind of server Java or can we continue to use simple HTTP Post, as we do today with BB5, 6 and 7?

  Remember, I'm only interseted in the BES (business devices) and not BIS sceanrio.

  Alon

  Saw this and am a student.

  Am also following information here

  http://supportforums.BlackBerry.com/T5/Cascades-development/BB10-client-can-t-get-BES10-push/m-p/239...

  Will let you know how me.

• I'm confused about CS5 and HSBHSL

  I have read everything as much as I can get on what there is online on this topic and still come away not being able to get into my CS 5 (optional Plugin)

  I have extensions Manager on my computer saying that the plugin is loaded in the PS, but he's not here, I searched my applications Plugins and it isn't here either, I deleted the extensions Manager and redownloaded it and it's still not there... I read the instructions provided with the file zip more than once.

  I want and need this on my photoshop it is important to my workflow. So is there someone who can make it more simple for me.

  Lynn Ross

  Yes, disable the box to the additional plugins folder.

  Yes, the plugin is very well within the plugins folder.

• Exchange of data between the internal and external labview code

  Sorry for a simple question.

  I have a TestStand sequence that uses units/tests written in LabVIEW. The sequence is extermnally began with a stand alone LabVIEW program. I need to establish simple exchanges of information between units of the sequence LabVIEW and LabVIEW external code.

  Information are simple strings will eventually be sent in both directions.

  Please advice what commumnication path needs to be implemented.

  Unfortunately, arttempts to search OR site Internet (or Internet) result in a large number of irrelevant information. Probably, I can't shape appropriate keywords. There is therefore a need for your help.

  Thank you

  _Y_ wrote:
  [...] It takes by presenting some initial information (e.g. username) in the sequence [...]

  Use a Message from the user interface of query for the data (data available in the user interface, executing sequence requires it).

  _Y_ wrote:
  [...] and view the status of intermediate/final level in the user interface.

  Use a Message from the user interface to transmit these data to the display (data available in the execution of sequences, Which requires it)

  Norbert

  EDIT: Btw, you should use TestStand user to nicks track management. This gives you more options and security than some custom stuff implemented in the user interface.

• BlackBerry smartphones, I am new and confused about things 'connection '.

  I am a new BlackBerry - I have a Curve 8320, I am a small business owner, and I'm not connected to a BES. I use the BB Desktop Manager to synchronize with Outlook and to back up my BB and I did pretty well on most things, but I have still a few things that I leave me puzzled. In this forum, I will ask my "questions of confusion" about data options.

  I have a data plan "pay as you go" with AT & T, my provider, because there is practically no cell reception at home where I work. (I not use my BB for email since I was at my computer most of the time). I have a home network set in place and I have incorporated a router that supports wireless. I have connected a netbook to the wireless network and used to surf the Internet, so I know that my wireless connection works. I also managed to create a wireless connection on my BB to this network and on the home screen, it appears the name of my wireless network when I am here at home, so, I know that the device is connected to my network.

  BUT I don't think that I'm really using my home wireless network... I tried the other day browsing the Internet, and then AT & T told me that I hired data charges - I thought that I should not have if I wasn't using their network. Either I am wrong all assuming that they don't charge me if I use my network or I have something set up properly on my BB... someone can provide some guidance?

  Then, I don't really understand what BIS... I searched through the KB and couldn't find something that sets actually BIS... could someone please explain what BIS?

  Finally, can someone please explain the difference between "mobile network" and "wi - fi"? Apparently, if I disable "mobile network" I have no connection at all, including wi - fi. Is that the way things should be? But, I can turn off wi - fi and always get a connection (if I go out too far from my house, South possible and face).

  Thank you... and now I'm leaving the Forum of BB Desktop Manager to ask some questions here!

  Thanks to all who responded... I now have a much better understanding of the work of the whole thing "data". I disabled my LAN connection, which should avoid all charges. The part that confuses me the most, is that AT & T said would not have to pay to use my own wi - fi, but... it doesn't seem to be the case. So, McDonald's and Starbucks will work very well for me.

• I have a LG Blu - Ray external brunner and a code error 3 appear in even when Brüning a BluRay disc. What can I get Adobe to do the work of brunner.

  I have a LG Blu - Ray external brunner and a code error 3 appear in even when Brüning a BluRay disc. What can I get Adobe to do the work of brunner. LG Rep said that I need something Adobe

  Code 3 still http://forums.adobe.com/thread/1371866?tstart=0 and https://forums.adobe.com/thread/494407

• Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for RAW files. I have 8.7 DNG, but I was wondering if LR and PS will import direct soon thanks for all the tips

  Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for RAW files. I have 8.7 DNG, but I was wondering if LR and PS will import direct soon thanks for all the tips

  Support for the Nikon D750 was introduced in the last version of LR 5.7 and ACR 8.7 Novemder 18 2014.

  New updates for LR 4 were arrested when LR 5 was released on June 9, 2013. No other updates of bug fixes and new camera support.

  Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced on the market in September 2014 some 15 months after further development of LR 4 was arrested.

  You can use the Adobe DNG (free download for packing) program to convert your Nikon D750 Nef (raw) files in Adobe's DNG format which will allow you to import those into LR 4. This is the crutch provided by Adobe to allow the processing of raw files with versions out-of-date LR and ACR.

  You can also update the ACR for PS CS6 version 8.7 plugin that can also work with the raw files of the D750. For direct support in Lightroom, you will need to upgrade (paying) to version 5.7.

• Confused about autonomous OBIEE and OBIEE integrated this two Architecture

  Hello
  
  I'm confuse about autonomous OBIEE and OBIEE integrated this model two...
  
  Are these two situation based on the same application (and then after that install US based on the standalone OBIEE, BI applications it become integrated model)
  
  or are they two separate applications but integrated OBIEE this model can support BI applications?
  
  Kind regards
  
  Anne

  Hi Anne,.

  It's the difference,

  Autonomous OBIEE - has no any solution of BI preconstruitse, we build the solution based on our requirement with the suite of products.

  Integrated OBIEE or OBI Apps - are built on standalone. It provides this stand-alone version features all, moreover, it has predefined solutions.

  Rgds,
  DpKa