Connect HP Photosmart 5510.

Similar Questions

• Device - CANNOT CONNECT HP PHOTOSMART 5510 COMPUTER USING WINDOWS 7

  I need help in establishing a HP Photosmart 5510 to my laptop that is running Windows 7.  Can I connect the printer to my iMAC with no problems whatsoever, but I can't connect to my laptop.  It says thay there is no driver available for this printer. I also tried the HP website and they don't recognize the printer.

  Help

  When you are in the printer with the connected printer Add Wizard, select Windows update.

  It will take more than 5 minutes to get a list of printers that are updated.

• an I can cushion of wireless photosmart 5510?

  can I an I Pad wireless connection with photosmart 5510?

  No, you cannot connect to this printer (or the most current HP printers) directly on an iPad without a wireless router.

  If the router is n it is backwards compatible to g.  If it is g, well, then this is g.

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!

• How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?

  How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?

  The Tablet uses Android 3.2 and I downloaded HP ePrint home & Biz. Also had a pincode and used it.

  The Tablet still shows "printer not found." I have to do something on the printer?

  The printer is connected to a wireless router?  What router?  You've restarted the router?

  You have enabled Web Services from the front of the printer?

• Problem connecting USB to install HP Photosmart 5510 all-in-one inkjet

  Photosmart 5510 all-in-one inkjet

  Windows XP Pro x 86 (32-bit) service pack 3

  Software installs fine until he asking for the type of connection. The computer does not have wireless so I select USB connection and it fails every time. If I select to connect to PC later and plug in the USB, Windows detects new hardware (HP 5510) and asks where to look for drivers. When directed to the installation CD "Invalid data" error when copying files. In the Device Manager in the USB section it lists the Photosmart 5510 with a yellow! Selection of reinstall the driver results in an "impossible to install error.

  There is no other printer currently installed on the computer and the 5510 Photosmart is set as default printer. So far I have;

  tried different usb ports

  tried running the installer from the installation CD

  I tried to download updated drivers

  tried to install with disabled firewall and antivirus

  tried to install it in safe mode

  Same problem occurs every time. Any solutions or suggestions would be greatly appreciated!

  Thank you.

  Finally solved the problem. Had an old Pentium 3 machine around the pose and decided to try to change the disk hard on and see if I could install the printer with a different material.

  It turns out that the mup.sys file, which has something to do with PnP devices, has been damaged and Windows wouldn't start in the other Tower. Then, I took out the HARD drive and put it back in the Dell can reformat Windows XP and guess what, printer installed without a hitch the first time I tried! Now I have to reinstall everything on the computer * sigh *.

  In any case, the printer problem fixed!

• Wireless connection for Photosmart HP 5510

  I can not connect my Photosmart HP 5510 to the wireless network. It detects the wireless network, trying to connect, and then gives that the MAC address filtering message can be activated on your wireless router that can prevent your HP printer to connect. I don't know what to do, please help

  Hello

  Clarify your router brand and model can help provide you more specific advice.

  You can contact your router service provider and check the following settings:

  1. If Mac filtering is enabled in the configuration of the wireless router, make sure to add the printer Mac address as the authorized device.
     You can find the Mac address by printing a Network Setup Page.
     (Menu wireless > wireless settings > print Network Configuration Page [Ok])
  2. If your router's wireless security defined as Wep.
     Check it defined as Auto / Open authentication and authentication unrequited which is not supported by the latest HP printers.

  Kind regards

  Shlomi

• I bought a photosmart 5510 and I'm unable to connect to the internet.

  Hi, I am looking to connect my newly purchased Photosmart 5510 to the internet. I can see that it is connected to the homenetwork, but not the Internet, so I can't use the e-Print. I have a router D - Link DIR-635 B3 without the WPS button (maybe built in). I can't locate any relevant support.

  Logically, I can see that I can't proceed until the Internet recognizes the connection.

  All good ideas what the problem could be,

  '

  Jesper, Copenhagen

  Looks like some of the parameters of the network to the printer is maybe not correct or the ISP DNS servers may have been a problem for ePrint servers.

  Try to set an IP static, as shown in step 6 of this document from HP.  The only change I recommend is what DNS servers are used.  Use auxiliary favorite for DNS 8.8.8.8 and 8.8.4.4 for DNS.  These are Google's public DNS servers, but they tend to work very well with ePrint connection problems.

  Also, make sure that the proxy settings are blank and not controlled.  This is possible access SAP, as indicated in the document, and then go to network > Networking > Proxy Server.  If you receive a certificate warning, select the option that allows you to continue anyway.

  Once the static IP address with Google's DNS servers are defined and the proxy is disabled, try to re-enable web services.

  Let me know what happens.

• Photosmart 5510, loss of connection

  Help

  I tried everything but I had my Photosmart 5510 for 2 years without problem and now everything suddenly stopped printing, I turn, he's walking and sometimes his prints. I have disconnected and removed and re - configure printer you but nothing works

  I tried every suggstion on the forum

  I try to run a business and just wasting hours on this

  If I can't do it sorted I'll dump HP and never use them again

  Thank you

  Thank you for visiting the Forums from HP Support. I'm sorry but this is a community of peer-to-peer HP customers and not a venue to contact HP directly. Most of the users here is consumers like yourself that offer solutions because they like to help others and HP employees that you see are here on their own abilities and not representing does not society.

  If you have additional or direct comments for HP on their products or services or questions on the repair, you can use the link below for contact information.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

• Photosmart 5510 - scanning problem; Impossible to establish a session / unable to connect to the computer

  Photosmart 5510 was printing and scan OK, but now can not sweep.  Printing is OK.  Have reinstalled the drivers, reinstalled the software, rebooted Mac and printer.  Operating system OS X 10.6.8.  Received error message when reinstalling software "com.hp.dmf.DeviceConfiguration.ErrorDomain error-2002", but did not cause of reinstallation of software to fail.

  Have you tried everything I can think of... any suggestions?

  I did all that, but he also discovered that my macbook has a manually assigned IP address outside the DHCP range, router, so the printer/scanner perhaps could not see it on the network.  One or the other or both solved the problem... Thank you!

• HP Photosmart 5510 'Printer offline' show

  To the right,.
  
  I started having a problem with my HP Photosmart 5510 - running on a Mac OS x 10.6.8 computer wirelessy.
  
  Until yesterday, I was able to print wireless towards her, even when he was asleep he wakes up and print.
  
  Now, however, I get a "Printer offline" message whenever I try to print what he's awake or not and I have to turn on the printer and on again before it prints.
  
  My printer HP utility can see the printer and it is connected to my network.
  
  Any help would be appreciated,
  Thank you
  Ronan

  I found this on the Apache site:

  "You unexpectedly see an Apache HTTP Server installation page when you visit a Web site. If you sent us mail because you have seen a page saying "it worked!" (or something similar indicating that Apache has been installed) on your screen or a Web site you have visited, please go back and READ the page. It must also specify what happens. The page is the equivalent of a demo or the Readme file from a Windows installation of the application; It is intended for the person who has installed the software and is supposed to show that the installation has been completed successfully. The problem you are experiencing has nothing to do with us, and we cannot help you. You must contact the webmaster of the site. If the site is www.foo.com, for example, try to send mail to . If it is www.toddsbeer.org, send an email to . And so on. »

  I think that there is something funny, with (probably your DNS of ISP) your router's DNS settings.  You can enter the configuration of the router and change the google DNS or OpenDNS DNS?

• This issue is still pending. My PhotoSmart 5510 continues to go offline during the generation of printed documents.

  I have a PhotoSmart 5510 and a Toshiba i7 Quad 4 laptop running Windows7 with a Trendnet Wireless router.

  My PhotoSmart 5510 disconnects when printing is generated.    All systems are go: online wirelessly connected wireless, does not not offline, set as the default printer, checkmark, etc..  Sometimes it will make an impression and disconnect and sometimes it will disconnect the first time and will not be printed.

  If I run the diagnostic utility I can usually get it online.  But the said diagnostic utility it is disconnected and the problem is not "resolved".

  It also has a problem with the USB.  If I've set up as a USB printer will crash the entire operating system and laptop computer will not restart unless the USB is disconnected or if the printer is turned off.  This does not happen with my laptop computer on the same Lexmark printer.

  obewan,

  This article should help to keep the Wi - Fi connection (including things like setting a static IP address for your printer to avoid the crash between you OS/router/printer):
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Photosmart 5510 - wireless Mac - printer offline

  Hi there, I am trying to print from a Mac again photosmart 5510, wireless is connected, tested printing via an ipad - runs like a dream.  Unable to print message error "printer is off-line" laptop (Mac 10.7.2), the printer is not connected.  Printed with a cable but I can't via wifi. Have checked all troubleshooting tips, no luck.  advice is appreciated

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Photosmart 5510: photosmart 5510 doesn't scan

  My Photosmart 5510 left scanning for computer (HP Pavilion with wireless connection). I get a msg of unsuccessful scan from the printer and an HP 5510d series is not found msg on my computer.  He still won't print.     I restarted everything.   When I opened the printer from start I get a box Priinter configuration and software with connect a new printer and add more software options.   A ran the full feature software and driver and get msg that I need to insert the disc and the earlier version cannot be deleted.   Ran print and scan doctor and it says Installer get full software not installed.  I don't know what else to try.

  Hi @dmorfy,

  There is a utility called Microsoft mount it that might be able to help to uninstall the old version of the HP Photosmart from your PC software. It is pretty Strait before running.

  Once it's done try to reinstall the software.

  Please let me know how it goes.

  Thank you!

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!