Connect to the console of vCenter device using the roots
It is possible to connect to the console of the vCenter (5.5) device uses root? And I don't mean via SSH; I mean in vCenter open the 'Virtual keyboard' unit vCenter VM and then login? When I type in the root, it asks me not even a password - it just says: invalid connection. Curiously, if I type in administrator would it ask for a password but I don't know what is this password (I was just with administrator to test to see if other accounts acted the same way).
Thank you
NK
Too funny - I had to reboot the device last night in a different purpose and when I tried to login this morning to get the screenshots, it worked. Chalked it up to gremlims/Ghost in the machine.
Thank you
NK
Tags: VMware
Similar Questions
-
Not able to connect with the root via putty ssh account
Hello
I activated the lock mode and activated ssh as well.but I am still unable to log in using PuTTY says access denied. At the same time, I can able to connect to esxi console using the root account. Help, please.
In the locked mode, you will only be able to connect through vCenter, not via SSH.
-
Error when you try to connect to the root of the three armies...
Good afternoon
I installed and authorized the latest version of the Plugin of Dell OpenManage integration with VMware vCenter v3.1. I have a license of 10 host. I have two sites, managed by two different vCenter servers. I'm under ESXi 5.5 updated 3B and the latest version of the software, vCenter.
On the first site, I will have no problem connecting to the iDRAC and hosts. On the second site, I can connect to the iDRAC, but guests return with a response that says, 'Fail - unable to reach the host. Check credentials of the host, network connectivity or an agent of the OMSA (as appropriate). »
I checked that the credentials are correct. I have no problem of connectivity to the hosts, so I am at a loss here. Any help would be greatly appreciated!
Thank you!
antsmanThis error was caused by the fact that all the servers Dell before the 12th generation (12 G) require the OMSA (OpenManage Server Assistant) VIB installed in VMware, before you can manage the server. Generation of 12 and later built. The Dell documentation on it is hard to find and did not come with the OpenManage for VMware integration Plugin.
I found a link super site of a user on how to install the VIB.
Everything is good now!
antsman -
root vCenter device connection refused
Hello
facing a problem for the last 4 months.
I am unable to connect to the root device vcenter account.
via ssh or local console. raise them an access denied error.
I tried to see if the password has expired by this article: http://www.virtuallyghetto.com/2013/09/how-to-recover-vcsa-55-from-expired.html
It was not the case.
while I was there, I decided to try this: http://www.virtualpotholes.com/post/124746380849/how-to-reset-the-root-password-for-vcsa-60
has confirmed that several articles said the same thing: http://www.settlersoman.com/how-to-reset-root-password-on-vcenter-appliance-vcsa-6-x/
saved the file of the shadow, disassembled the drive and rebooted.
I am still unable to connect local shell or ssh.
I'm puzzled.
I found some details on the reason that what was going on.
When I tried to connect ssh I would just get access denied. even when you connect through the console.
When I tried to change the console session (ALT - F1) and logging in there I got an eloquent message.
account locked due to 1342 connection failures
as I said, it's been 4 months.
any reset procedure I tried worked. However, the account was always BLOCKED.
According to the documents of the shadow, it was not. but according to the addin to pam tally2 it was!
following this article (http://www.sneaku.com/2015/06/12/vrealize-operations-manager-6-0-root-account-locked/) and general linux distro forums skimming validated these results.
I could use to unlock the account.
-
In vRA6.2.1 default vRO casts cannot connect to the server Orchestrator
VRA 6.2.1 installed and configured successfully.
VCenter added Endpoint
Tested create workflows of catalog data center and it works very well
Imported from my plugin for orchectrator
Tested a workflow and throws are unable to retrieve, etc...
VRA rebooted device
By default orchestrator test connection failed.
Selected option orchestrator external and provided same vRA incorporated vRO credential
Test connection successful - don't know why it failed when I choose default orchestrator
Now tested my workflow plugin and it works great.
Later, I chose the default orchestrator still test connection fails - any reason?
(1) "default orchestrator" doesn't really mean "the on-board Orchestrator. It means "the orchestrator server configured in the system by the system administrator.
We can consult, by connecting w / system_admin and see what is there. If there is a mismatch - repair
(2) if (1) is not an issue, then connect with the root user in the vRA WILL and run the following command "vcac-vami vco-service-reconfigure.
-
Error created another Console service, unable to connect to the host by vSphere vCenter
After creating an another Service Console unable to connect to the host by vSphere vCenter. How can I remove the now Service Console or make the old one further work well?
Thank you.
George
This KB will show you the steps to re-create the Service Console, but you'll need to console or ILO access to the ESX host.
http://KB.VMware.com/kb/1000266
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
Twitter: http://twitter.com/mittim12
-
I have setup a new vCenter to replace the old (new on MS server 2008, an old man on MS server 2003), but after registering the VM´s, I am not able to connect to them with the console. Error message: unable to connect to the MKS: Timeout during an attempt to read
If I connect directly to the host ESX 4 it works fine.
Is that what someone has any ideas, how to solve this problem? I have already tried:
-Added the new vCenter address and IP to the/etc/hosts
-restart the ESX servers
-Re-installed VMware tools to the new vCenter
None of the above has helped, and I start to desperate... Anyone have an idea?
If you use vcenter to manage your servers from another computer. You should try to disable the windows firewall on the vcenter computer that manages the esx server. He worked for another problem in the past. Windows firewall started blocking applications of mks someday and we don't know why. Allowing exceptions in windows firewall did not work if the firewall has been turned off completely and then it worked.
(Please allow points)
-
My pro iPad connects to the WIFI, but loses connectivity to drops in use. My other IOS devices (iPhone, macbook, etc.) do not have this problem. Ideas to solve?
Hello BrooklynWM!
I definitely want my iPad to stay connected to the Wi - Fi connection while I use it. Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping. We can try a few things.
Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network
Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported
After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.
Best regards.
-
My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)
Both devices are set to the highest security and each uses separate passwords.
Non apple devices can collect data from iPhones or Mac using the time Capsule?
With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.
Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.
If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.
-
Implementation of two R7000 mode bridge (1 connects them 2 the internet and all devices, use 2!)
Hello
I have trouble finding my drives NAS via Wifi.
Since I moved my NAS drives to the location of my second router and connect the first router to the internet and all my mobile devices and laptops, I have problems connecting to my NAS readers. Sometimes it works, but more often, it's not.
I've implemented the first router as "router mode" and the second router als 'bridge'
Can I change the configuration, so that my second router is connected to the NAS drives and also works as my router for mobile devices and laptops? Then the first router just to connect to the internet and transfer it via the bridge on the second router.
I tried this, but it doesn't seem to work...
Concerning
Michael
Just to close this topic: got the solution works by using a set of powerline Netgear. It provides internet access to my router located posting the TV and works perfectly. Wireless AC is not the answer to everything, I realize ;-)
Thanks for the discussion.
-
I have tried everything I can think of nothing doesn't. The strange thing is that it connects as usual and I can even use Skype and download updates, but I can't surf the net. I can't understand. I have tried ipconfig release and then renew, repairs of stack TCP/IP, Winsock reset and the use of different browsers. I ran the XP connection troubleshooting tool and received the following message, that this is probably caused by your firewall settings
"check the settings of the firewall for the HTTP port (80), HTTPS (443) AND ftp PORT (21) port.
The problem is that I can't change my firewall settings that I can not start the firewall and get this error message every time I try
Cannot start the service Windows Firewall/Internet Connection Sharing (ICS) on the Local computer.
Error 0 x 80004015: the class is configured to run as a different caller's security idI downloaded the hotfix from microsoft, but it made no difference unfortunately.
I use AVG 2011 antivirus protection. I tried connecting via the wireless and wired. I did ipconfig and tried to rattle of my other devices and my router and everything seems normal because they can communicate with each other. See below.
Microsoft Windows XP [Version 5.1.2600]
Copyright (C) 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrateur > ipconfig
Windows IP configuration
Ethernet wireless network connection card:
The connection-specific DNS suffix. : gateway.2wire.net
IP address...: 192.168.1.72
... Subnet mask: 255.255.255.0.
... Default gateway. : 192.168.1.254
C:\Documents and Settings\Administrateur > ping 127.0.0.1
Ping 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">
Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">
Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">
Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">
Ping statistics for 127.0.0.1:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 0ms, Maximum = 0ms, average = 0ms
C:\Documents and Settings\Administrateur > ping 192.168.1.72
Ping 192.168.1.72 with 32 bytes of data:
Response to 192.168.1.72: bytes = 32 time<1ms ttl="">
Response to 192.168.1.72: bytes = 32 time<1ms ttl="">
Response to 192.168.1.72: bytes = 32 time<1ms ttl="">
Response to 192.168.1.72: bytes = 32 time<1ms ttl="">
Ping statistics for 192.168.1.72:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 0ms, Maximum = 0ms, average = 0ms
C:\Documents and Settings\Administrateur > ping 192.168.1.254
Ping 192.168.1.254 with 32 bytes of data:
Request timed out.
Response from 192.168.1.254: bytes = 32 time = 2ms TTL = 255
Response from 192.168.1.254: bytes = 32 time = 4 ms TTL = 255
Response from 192.168.1.254: bytes = 32 time = 1ms TTL = 255
Ping statistics for 192.168.1.254:
Packets: Sent = 4, received = 3, Lost = 1 (25% loss),
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 4ms, average = 2ms
C:\Documents and Settings\Administrateur > ping 192.168.1.70
192.168.1.70 ping with 32 bytes of data:
Response of 192.168.1.70: bytes = 32 time = 2ms TTL = 128
Response of 192.168.1.70: bytes = 32 time = 94ms TTL = 128
Response of 192.168.1.70: bytes = 32 time = 8ms TTL = 128
Response of 192.168.1.70: bytes = 32 time = 13th month TTL = 128
Ping statistics for 192.168.1.70:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 2ms, Maximum = 94ms, average = 29ms
C:\Documents and Settings\Administrateur > ping 192.168.1.254
Ping 192.168.1.254 with 32 bytes of data:
Response from 192.168.1.254: bytes = 32 time = 1ms TTL = 255
Response from 192.168.1.254: bytes = 32 time = 2ms TTL = 255
Response from 192.168.1.254: bytes = 32 time = 3ms TTL = 255
Response from 192.168.1.254: bytes = 32 time = 3ms TTL = 255
Ping statistics for 192.168.1.254:
Packets: Sent = 4, received = 4, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 3ms, average = 2ms
C:\Documents and Settings\Administrateur >
I worked on it for 2 days straight trying to find a solution and this is my last resort. I really hope that someone can help me because I even tried technicians internet ATT who couldn't help me. There must be a solution out there. I must be missing something. It must be a software problem or something simple. Help!
Hello
You can check this link:
http://support.Microsoft.com/kb/920074
Note:
It implies also on Windows XP SP3
-
m276n: print from a mobile device using a wired connection on the printer
Hello
I am considering buying the printer m276n for use in the home. I have a small Home Office on the top floor of my house which is out of range of my wifi signal but has a wired connection to the same router that broadcasts the wifi signal. I want to put the printer and connect it via a wired connection to the network. I know that it works perfectly for all windows home computers that are attached to the same network (wired and wireless), as long as I give you a fixed IP address to the printer.
But since we use mobile devices more and more (apple and android) it will be a nice to have to print those as well. I watched Eprint Airprint movies, but all tell me that the printer must be connected wireless. Is it a necessity or my proposed wired installation will work just as well?
Hi @MartijnS ,
I see by your post that you would like to know if you can use the ePrint Airprint functionality with the printer and when it is configured on the network via an Ethernet connection. I can certainly help you.
The ePrint and Airprint feature work when a printer is connected to a network. It can be wired or wireless to the router.
Here is the document with a little information for print from an Apple Mobile Device.
The documentation shows also wireless, but again, it works through a wired too.
I hope this helps.
Have a great day!
Thank you. -
Push the connection interrupted by device - using eclipse of the bb Simulator
Using BlackBerry plugin for Eclipse
For OS 6
After taking two weeks to try and correct an error "not close until you have finished" simple with SQLite, I now have a bit of a configuration issue with the Eclipse software.
When I push a message to the Simulator, I get the following error.
<2012-04-18 15:39:15.471 EDT>:[378]:
: : http://172.17.111.35:[email protected]&priority=2&besurl=192.168.1... pushId = -62be8811:136c6f71d73:-7ff576188, destination = [email protected], result code = 400 net.rim.protocol.iplayer.push.b: Push connection aborted by device> According to the knowledge base, a 400 error is 'invalid Push to the format.
Mobile data service 3.7 and earlier versions: the email address or the personal identification number (PIN) used in the Push was not recognized as a user of BlackBerry Enterprise Server enabled for Mobile Data Service. »
I'm sure it's something with the configuration in the rim.property file. Something probably must be on or off, I can't understand.
[MonitorAgent] MonitorAgent.listen.port=8070 [WebServer] WebServer.Tomcat.transcoding= false WebServer.listen.host=localhost WebServer.listen.port=8080 WebServer.listen.sslport=8443 WebServer.servlet.monitor.port=8070 WebServer.servlet.monitor.host=localhost WebServer.servlet.push.port=81 WebServer.servlet.push.host=localhost WebServer.servlet.push.ssl=false [SRP] SRP.UID= please get one SRP.AuthenticationString= Please get one SRP.InetAddress= Please get one SRP.Port=3101 SRP.logging=true [IPPP] IPPP.push.listen.tcp.port=81 IPPP.connection.MaxNumberOfKBytesToSend=128 IPPP.queue.flowcontrol.window.size=-1 IPPP.queue.flowcontrol.timeout=600000 IPPP.logging=true [UDP] UDP.receive.port=19781 UDP.send.default=19780 UDP.init=initialization_packet UDP.logging=true [HTTP HANDLER] application.handler.http.logging = true application.handler.http.CookieSupport = true application.handler.http.AuthenticationSupport = true application.handler.http.AuthenticationTimeout = 3600000 application.handler.http.device.connection.timeout = 140000 application.handler.http.server.connection.timeout = 150000 application.handler.http.device.credentialTimeout = 60000 application.handler.http.authentication.mechName2oid = Negotiate=1.2.840.113554.1.2.2, NTLM=1.3.6.1.4.1.311.2.2.10, Basic=1.3.6.1.4.1.88888.1.2 [Security] net.rim.security.auth.DefaultDomain = rim.net [HTTPS HANDLER] application.handler.https.allowUntrustedServer = false application.handler.https.logging = true [TLS HANDLER] application.handler.tls.allowUntrustedServer = false application.handler.tls.logging = true [OCSP HANDLER] application.handler.ocsp.StatusProviders = net.rim.protocol.iplayer.connection.handler.device.ocsp.OCSPProvider application.handler.StatusProviders.OCSP.PrimaryResponderRank = Default application.handler.StatusProviders.OCSP.Responder.Default = http://dhobbs-wnt.rim.net/ocsp application.handler.StatusProviders.OCSP.UseDeviceResponders = yes application.handler.StatusProviders.OCSP.UseCertResponders = yes application.handler.ocsp.DebugLogging = no [LDAP HANDLER] application.handler.ldap.DEFAULT_SERVER = dhobbs-wnt application.handler.ldap.DEFAULT_PORT = 389 application.handler.ldap.DEFAULT_QUERY = ou=people, o=rim.net application.handler.ldap.DEFAULT_LIMIT = 20 application.handler.ldap.COMPRESSION = true application.handler.ldap.logging = false [Database] Database.shouldConnect=false BESName=DAISY1 Database.Driver=sun.jdbc.odbc.JdbcOdbcDriver Database.URL=jdbc:odbc:BESMgmt Database.DBCycleTimer=5 [ACL] ACL.Authorization.Datastore=net.rim.shared.service.authorization.JDBCAuthorizationDatastore ACL.Enabled=false [ESS] ESS.helpfile = help/Using_the_Email_Server_Simulator.html ESS.launcher = bin/launcher.exe [Email] Email.deviceId =2100000A Email.pop3Server =pop3.server Email.smtpServer =smtp.server Email.personal =Dean Logan Email.address [email protected] Email.smtpPort =25 Email.pop3Port =110
Any suggestions?
Figured it out.
When you set the port of the unit, I had the wrong port
_notify = (StreamConnectionNotifier) Connector.open (appAttributes.devicePort + appAttributes.deviceSide);
My company uses a Test port and a port of Prod, so that we can have 2 versions of the application on the device at the same time. Then, chaning the listening port of 1315 to 1313 authorized service push push to the appropriate port and the app was able to read the data.
-
Original title: Auntie Photon
Hi all
I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.
Help, please.
Hi Varun,
Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.
Please help me with the following information related to this issue:
- You have installed the required software on your computer which came with Auntie Photon?
- Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
- Press Windows Key + X.
- Select Device Manager.
- Check if there is no error or exclamation point under Auntie Photon.
This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.
Please follow the steps mentioned below:
Method 1: Run the hardware troubleshooter
The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.
- Press Windows key + W on the keyboard.
- Type the Troubleshooting in the search bar and press Enter.
- In the Troubleshooting window, click show all in the left pane.
- Click hardware and devices.
- Click right on material and devices and and select run as administrator.
- Click Next and follow the on-screen instructions to complete the process troubleshooting.
If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.
Method 2:
Note: Make sure that the Auntie Photon dongle is plugged.
Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:
- Press Windows key + X on the screen.
- Select Device Manager.
- Expand the network adapter and right click on driver and select Uninstall.
- Restart the computer.
- Windows will automatically load the drivers.
Step 2:
You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.
Windows Update: frequently asked Questions
You can also get in touch with Auntie Support and check the updates to driver for Windows 8.
Please answer us on the State of the question to help you further.
-
What is the use of Vmware vcenter device? and when it can be used? is it free?
Hi guys - when can we see VMware vcenter device an option? Is it free?
Is that it is contemporary with the linux version of VMware vcenter windows version with Sql express?
When we use this? Why not to choose windows VMware Vcenter license version if it is available for free? (up to max. 5 hosts and VM 50 s for how long we can use this in our environment)
Kind regards
Abhishek Singh
According to me, there's no difference between vCenter through windows & device licenses.
You will get vCenter license (as a whole) and now its your choice to deploy vCenter either on windows or deploy the same form of appliance. Once deployed, you must apply the license.
If you opt for the vCenter Foundation, you will get the same set of features you deploy the VC under windows or as an appliance. It is the same for the standard vCenter license. If you deploy on windows, you need windows license as well.
Reference: purchase of VMware vCenter Server: virtualization systems management | United States
Let me know if you need any clarification
Maybe you are looking for
-
HP Deskjet 1000: Printer connectivity
I have a 3 Surface Pro and an HP 1000 J110A printer. I use these 2 devices on a trip to do my job, the Surface Pro has only a usb port that I have my laptop mouse plugged. To use my printer I need to keep out the usb mouse and connect the usb from
-
Now running Vista Edition family basic on a Dell computer
-
Pavilion 110-414: best way to install a photosmart 5180 on new 8.1
What is the best way to install a Photosmart 5180 on a 8.1 new pc? I have the disc, but I don't think it'll work. Can I download the software and connect via USB cable or wireless. The pc is wireless and I tried to find the printer on the network, bu
-
I am trying to listen to a recording of the teleconference, and it says that the file isn't valid. What is c? How can it be solved?
-
BlackBerry Smartphones has way to disable the Notifications screen?
Before I can get by email or phone on my BlackBerry, I must first click OK several times to dismiss the calendar to display notifications. Is there a way to disable these notifications? I use mainly my BlackBerry during the day, so accumulate calenda