Connection error to the catalog in the Console of the AIS

Similar Questions

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• Connection error to the login server to view while adding the view composer

  Hello

  I added VM Vcenter server successfully to the server connection in my opinion. now, I'm trying to add server offline view composer to the login server setting. I get the error message

  Unable to connect to view the composer.

  Thanks in advance for any help

  Hi, could you please download the log files. Check the link mentioned below, it will help you.

  VMware View 5.2 Documentation Library

• Cannot connect - error loading the database...

  Hello

  Since last night find it me impossible to log in on my Skype.

  He puts me "error loading the database. Skype." It is possible that another instance of Skype to use it.

  I have reinstalled Skype, restart my pc, close all programs that could use it.

  My husband get a leverage son skpe without pb so it comes well d a pb with my nickname... going to Word of the change back I. Despite all this, I still have the same message that appears! 1

  did anyone have the same pb? and how he made it?

  Please pour your help!

  Rrbonjour

  so I did well the manip: Task Manager, process shutdown Skype.

  then relaunch the application, but it gives me the same result...

  I made a new system more earlier but it's restore gives me the same result...

  I asked a third person open my account on another pc and ca works... so it just my pc, not a hacking, (already it reassures me!)

  My spouse does so well to open Skype with his nickname but I still nothing.

  Application rattachee a Skype name can she used Lun?

• Connection error to the web proxy signer

  I get the following error when I try to sign the cod files:

  "Error connecting to the web proxy signer."

  RIM sign services down?

  RBB = 1993325328http\: / /www.rim.net/Websigner/servlet/BBApps
  RRT = 1993325328http\: / /www.rim.net/Websigner/servlet/Runtime
  CPR = 1993325328http\: / /www.rim.net/Websigner/servlet/CryptoRIM

  I think I got the answer in the meantime:

  http://isthesigningserverdown.com/beta

  If all goes well they will be until shortly after.

• Connection error during the import of metadta in OBIEE 11 g

  Hi all Experts,
  
  I'm trying to import metadata from Oracle 11 g R2 database (supported Version) to OBIEE 11 g R1 (11.1.1.5) physical layer Admin Tool, when I select a source of data, such as connection type OIC 10 g / 11 g returns an error, connection failed , alll of oracle database services are up and running. (My repository creation utility is run successfully on this database when is install OBIEE 111 g)
  
  Also, I created an ODBC connection to oracle database 11g R2 import, the connection is created successfully, to return the same error message with all sys, s/n users.
  with other data source when I tried as of SQL SERVER 2005 there is no error and can import successfully.
  
  Please give some solutions
  
  Thank you

  Hi reda,.

  Paste the file tnsnames.ora in these two places,

  {Oracle_BI1} \network\admin directory &

  \Network\admin {oracle_common} directory

  Rgds,
  DpKa

• Connection error using the ID of the company on iOS

  Hello

  I can't connect to my Creative Cloud libraries using an ID of the company on iOS.

  It works well on Android?

  Is there a fine adjustment to help iOS connection?

  I guess that's an internal issue in the workflow of authentication (supposed to be SSO) between our AD company and creative cloud enterprise environments.

  It works on PC but not on Mac with CC Desktop App too, but it works well with Safari.

  It works on Android device but not iOS when inside the company, but outdoor work...

  Our team work network & IT on the question

• I have a problem with 'url not valid and cannot be loaded' also the site accuweather on my toolbar does not load, all I get is a sying note "connection error". The google homepage, I've always used is empty at the start of firefox.

  I had a problem where firefox crashed while the closing bbc iplayer site last night, I reebooted firefox and everything seemed in order until this morning. I cannot use the default Web page of google but you can use the uk version. When you try to solve the problem I get the "invalid message url."

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

• HP Officejet 6600: Connection error when you try to use the Apps?

  I am trying to use the applications so that I can scan to e-mail.  When I try to open apps, I have a connection error.  I have run the wireless network test and all pass and the signal is excellent.  The eprint works very well.  I can't understand why I get a connection error when the wireless is configured and passes all the tests.  I tried scanning HP doctor thing and could not help solve it.  I'd appreciate any help.

  Thank you!!

  I had to delete web services and then add it again. Seems to work fine now. Thank you!

• Problem in sending the request to the server, MDS started after expired connection error

  Hello

  I have a problem when sending request to the server. I need to manage the time of connection error. When I send a request from my device to serve and connection time-out error, I need to send the request back to the server.  To test this error, before sending the request, the MDS quit and then I try sends the request to the server. After 2 minutes, the appliance up Connection Timed out Error.

  Now when I start the MDS and refer the request to the server, the request sent when the connection has expired also reached the server. (Totally 2 request are sent to the server).

  What is the behaviouir of MDS? If so how should I handle this.

  or have I missed something on my side?

  I use BlackBerry 4.2.1 JDE with SDM (4.5.0)

  Thanks in advance.

  (Note: see this link for the behavior of MDS.)

  Hi all,

  I finally found the solution.

  Everytime I go to start the net, I check that the connection is available or not by using below codes...

  HttpConnection conn=null;try    {    conn = (HttpConnection) getConnection(myURL);      if(conn == null)     {           Inform the user the process is in offline       }     catch(Exception e)      {      }      finally      {                try                {                    conn.close();                    conn = null;                }                catch (Exception e)                {                    conn = null;                }            }
  

  When this function is execute the connection is not closed properly.

  After that I got the connection error, start the MDS, meanwhile runs unclosed connection.

  Now, I removed the check above, its works very well.

  I made a mistake. Finally, I saw that and correct it.

  Once again thanks for all your opinions and answer.

  Sorry for my English.

• Web Services problem - server connection error

  Hello world.

  When I try to enable Web Services, I get an error. I am connected to internet (WiFi) and the connection is ok.

  The error is:

  Server connection error

  The printer could not connect to the server. Check the internet connection and try again, or enter a proxy address.

  I do not have a proxy, and the internet connection is ok! Why do I have this problem?

  Thank you very much.

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.< the="" dns="" could="" be="" your="" problem.=""  if="" this="" does="" not="" work,="" try="" google's="" dns="">
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Server connection error

  Series of photosmart HP 7520. -J' am trying to scan a document to send and keep getting the message "server connection error" despite the fact that WiFi is showing as connected. I'm not very good with technology! Can anyone help please?

  Hello Alleycat1. I understand that you have a problem scanning to e-mail, about the connection to the server. If you follow the troubleshooting in this HP document, the issue should be resolved, as it contains troubleshooting for this error message: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4022328&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02524629-11%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If these steps do not resolve the problem, I would like that you follow these troubleshooting steps (assuming you're the App on the front panel of the printer):

  1 Select the Web Services on the Panel forward, then settings.
  2. Select "delete web services" and wait as the services to be eliminated.
  3. Once finished, you will return to the home page.
  4. Select the Web Services icon on the printer and go through the steps of installing Web Services once more.
  5. you will receive a more recent code. Later, you can use this code to add the printer to your account eprintcenter.com hpconnected.com / using this code.

  6. you can, or that you may create another email address.

  7. try a different scanning to e-mail using the app.

  Please notify me when all troubleshooting is done, and I'll continue to help you if necessary.

  Mario

• LaserJet Pro M276nw: M276nw LaserJet Pro 200 connection error / update Firmware

  I'm trying to update my firmware on my printer wireless.  The current Firmware Datecode is 20121026.  I have run the wireless network Test report and the summary network and it shows the printer connected and on the correct home network.  I have no problem printing, however, when I go to Check for Updates I get the following message:

  Connection error

  The printer cannot connect to the service.  Check the Internet connection.

  Any suggestions?  Thanks in advance.

  OK, you got it the second time. Not all of the SAP is unified in the layout. It is more difficult to stay on top, but you found it. Ok. Always make the mistake so. This is not good.

  Looks like the printer is blocked. You have reset the network?

  Turn the printer off and unplug the router for a minute. Then when the network has restored himself to try to update the firmware again.

  You may need to update the firmware via a USB connection. This link will take you to the page of software and the printer driver. Software and pilot results for: HP LaserJet Pro 200 color MFP M276nw.

• "Camera connection error" on windows vista

  former title: uploading Photos when Vista does not recognize the driver.

  I have a camera 100K 5 years, that comes to be unpacked nine (a gift of 'Which' publications), but have been thwarted by uploading the photos because it seems that Vista does not recognize the driver. It says "camera connection error"? The camera operating manual explains how to work around the problem of "Windows 98, Windows ME, Windows XP & Windows 2000."  Windows Vista was not around at the time so no explanation is provided in the user manual.

  Could there be a solution that doesn't involve my purchase of another digital camera?

  The manufacturer of the device writes the drivers, not Microsoft.

  It would be best if you contact the manufacturer of the camera and ask them a solution to this issue.

  See you soon.

  Mick Murphy - Microsoft partner

• vSphere Client connection error

  I am trying to open a session in one of the v4.1 ESX servers.  When I connect, I get the error:

  Connection error:

  The query failed because the remote "IP ADDRESS" Server took too long to respond. (The order has expired because the remote server taking too long to respond.)

  Error stack:

  Call 'ServiceInstance.RetrieveContent' to object 'ServiceInstance"Server"IP ADDRESS"failed.

  This just started happening one day.  This particular server is on one VLAN different pings and are accessible via SSH and HTTPS Web site.  With any computer directly connected to the Local LAN I can not connect, no matter what VLAN I'm on.  I rebooted the host machine, which has not made a difference.

  Now... If I VPN in I can connect to the server. that makes no sense at all.

  Ideas?

  Grax,

  If you have access to this host for a single workstation (PC) and not on the nwtwork, I can only imagine that the problem is one of the following

  • Invalid routing on your network
  • A NAT rule allowing VPN would be workstation access too the local traffic of ESX, host and misdirection
  • A firewall on the local network rule
  • IP routing / Default gateways misconfgured
  • Sort of a loop of the road on your network.
  • Bad client on workstation installation (trying to install the client on another workstation on the same subnet and connectivity test)

  Try to access the form of host ESX a VLAN different on your network and see if there is no consostency.

  Finally, if there is no chance of it, gets the tha tcan workstation do not connect on the same subnet as the host and test ESX connectivity. If it works, your problem has to be in you config of networking.