Cooling on Portege R700 problem

Hello

I got to know that the cooling on the R700 latop problem is due to poor design.

To be more precise, aluminum has been used to build the heatsink instead of copper as it is shown in the commercial video of Toshiba (see below if you please). I sent my laptop to repair and it arrived just in Sommerdae (Germany).

Nevertheless, I would like to ask for a replacement of another laptop outside of this range if the heat problem could not be fixed permanently.

Best regards
Tahar B.

video link: http://www.youtube.com/watch?v=GD1o9qM2N3o

Hello Tahar

Thanks for your comment and a link. If you are not happy with your speech for laptop Toshiba people and I hope you can clarify.

To be honest s Toshiba best laptops are Portege series and they are designed for the use of the company and in the past, that Toshiba has used the best of the technology, the know-how and the best materials for Portege laptops.

I have old Portege 2010 and it was smaller, lighter laptop each generation. So far it works perfectly and the design is just... perfect.

Tags: Toshiba

Similar Questions

  • Portege R700 - problem with fingerprints to connect on Win7

    I have problems with my new Portege R700 with fingerprint reader to log on Win 7 acount.

    I have digital fingerprints installation to the system via the Toshiba fingerprint utility. Several times I can wake up the Portege of sleep or turn it on, fingerprints from the BIOS is accepted, after which appears logon screen in Win7 and in some cases, I'm able to connect automatically to this account. In some cases just system is pending, it is not possible to login with the password. I restart phone, sometimes more than once.

    You can help someone? I have already several times removed, Setup still traces of fingers, I updated the utility and the new driver fingerprint - nothing does not.

    Hello Vava

    Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

  • Portege R700 - problems with video playback with resolution more 360 p

    I have this problem of video playback on the first day. While for example on YouTube, video resolution than 360 freeze while the sound is ok.

    I contacted Toshiba whereby I had a linke for the bios and latest drivers. After the upgrade question persists. Sometimes I get a green screen by watching the video flash as well. I guess it's a hardware graphics card problem. Any ideas? Thank you! (Portege R700 19 L, win7 pro 64)

    Do you have this problem in full-screen-only mode or in full and normal mode?

  • Problem Bluetooth on Portege R700

    Hello

    I have Toshiba Portege R700. I tried to connect it with my Microsoft Bluetooth notebook Mouse 5000 - mouse.
    Bluetooth is enabled and scanning for the mouse gives: "unable to detect the device.
    I managed to connect it to my phone Nokia E52 mobile.
    Need help.

    Thanks in advance,
    Giora

    This mouse is not known to me but check the manuals you have with her. There must be a way how to enable the detection on this mouse mode.
    After you enable this mode on the mouse scan the area with your Portege again.

  • Portege R700 + dynadock U - huge problem with video delay

    Hi all!

    First of all sorry for my bad English.
    I bought a laptop Toshiba Portege R700 with Dynadock U. Everything is going well except the video. Image on the external monitor connected to the Port Replicator is very slow, even when I work on the empty desk.
    I have a lag huge picture windows animations are real slow, the mouse jumps, do not commonly.
    On the toshiba operating system is Win 7 x 64. I installed the latest drivers from the support page.
    Please answer.
    Thanks and regards.

    Hello

    What Dynadock are you using exactly? U10?
    Please check this page > http://www.displaylink.com/support/downloads.php
    You can find the latest version of the driver Dynadock.

    What version do you use?

  • WXP Sound Driver install problems on Portege R700

    Hello

    Have installed Windows XP on a new Portege R700 PT310E. Have managed to reinstall all drivers, but can't for the life of get me the audio drivers installed. Install the audio drivers from the website but still no audio is detected. The unknown device in Device Manager is showing that VEN 8086 DEV 3B 56 but theres not really any useful info on the PCI database.

    Any suggestions on how I can resolve. Today cost me a bit frustrating hours!

    See you soon

    Hey,.

    I agree with the user above. You must install SP3 first because it contains some important fixes for the HD audio card. So take a look at the Microsoft Web site and download the update.

    After this attempt to reinstall the audio driver.

  • Portege R700 - gel & fan

    Hello

    I have an older Portege R700 for two days and it has developed a problem of freeze and fan. Actually, he launched the first day.
    Basically the screen freezes and kicks the cooling fan speed and nothing else responds until you make the stop & on again thing. Its happened a couple of times now on two different days.

    Any ideas?
    Send it back?
    Download a little amazing software, I currently don't know?
    Persevere on the toshiba site, until I have find how to contact Toshiba directly instead of you good people?
    Just ignore it and hope it goes?

    Any advice welcome. But please make it as simple as possible because I am a novice regarding the technical stuff.

    R
    (Just in case you think about overheating, based in the United Kingdom and is not a hot day and there is airflow around the laptop. The second gel happened after only about 2 hours of use).

    It is not easy to discuss these issues.
    1 / we don t know what OS you are using
    2 / the operating system configuration is not known to us
    3 / who knows what additional software do you use and what is running in the background
    4 / this occur with AC, battery or both power supply

    I put t really know what to say so at the moment. What you can do, if possible, contact nearest service, visit them, explain the situation and see what they say about all this.

  • Portege R700 - cannot activate the top modem mobile broadband

    Hi all!
    I have a big problem with my Portege R700 with Broadband Modem built-in.

    I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

    Where the new driver for FN Options?
    How is the correct name of this option?

    I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

    None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
    He worked perfectly but after the installation of the new 2 weeks no chance.

    * Issues: *.
    *.) don't see a modem mobile broadband in hardwaremanger *.
    *.) FN F8 show no option to activate the modem

    Help me please - it is an urgent problem because I need this laptop for businesses. :(
    KR
    Philipp

    > do not see the modem mobile broadband in the hardware Manager

    The question is: did you buy a Portege R700 with a module 3G?

    I m asking because different Portege R700 were released with different specifications.

  • Portege R700 - impossible to pass to Windows 10

    I have a Portege r700 with original Windows 7 OEM installation.

    Windows 7 is updated and program update Windows upgrade me to Windows 10 offer.

    The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to reboot the system to continue with the upgrade.

    After a few seconds, the restart process is launched and load... the current Windows 7 system, saying that there was an error during the upgrade process.

    I did some tests; I'm also a fan of Linux, so I tried to boot the system with a LiveCD of my distributions preferred: after loading of the quick menu asking what I want to do (the liveCD boot, installation, diagnose, etc), it restarts... and show me again the quick menu (quick menu is GRUB, kernel functionality has not been loaded right now).

    I understand that 'something' (and I guess it's system restore Toshiba) let me start on something other than the original partition, preventing the upgrade of Windows 10.

    Any idea?

    I was offered the free update on my R700-12U and R930-1DK Toshibas--and did the updates without any problem. However, if I understand it right, the R700 is not on the list of evolutionary units, but it has worked very well on my own, from up-to-date W7.
    concerning
    / Anders

  • Portege R700-19 t - new RAM-> start is no longer

    Hello together,

    so I bought two new RAM sticks for my old laptop
    Toshiba Portege R700-19 t

    But since I installed them, the machine does not start in an operating system more.
    The installed Windows 7 64 bit goes to a black screen before the windows at Startup logo (even in safe mode). And after a few seconds, the fans will quickly but nothing seems to happen.

    The next thing I tried was a (12.04) ubuntu live dvd. But it does not either. No error message or anything, just an automatic restart after a few seconds of black screen.

    The next thing was memtest86 + v4.20:
    It crashes immediately sometimes a black screen and sometimes at this http://i.imgur.com/eJqIyDp.jpg .
    I tested my new two sticks together and alone, still the same problem. The old ones that work perfectly and not crash of memtest.

    In the BIOS is the only thing on the memory and then it sees the correct "Total memory size 8192 MB.

    Plug portable-mem from toshiba:

    • Standard: 4 (2 + 2) GB
    • Max Speicherausstattung: 8 GB
    • Technology: DDR3 RAM (1,066 MHz)

    link to the Toshiba product description: http://www.toshiba.de/discontinued-p...tege-r700-19t/

    Cannes-old (work) ram:
    2 x Samsung 2 GB 1Rx8 PC3 - 10600S - 09 - 10 - ZZZ M471B5773CHS - CH9

    new RAM sticks:
    2 x G.Skill 4 GB DDR3-1333 (PC3-10600)
    link to the shop where I bought it: https://www.alternate.de/G-Skill/SO-...roduct/1154622

    In my understanding of both new sticks should work well with my laptop, or am I missing something?

    concerning

    For me, the question is clear enough; the laptop does not start because of new RAM modules.

    The new RAM modules are not totally compatible, or the RAM modules are defective.

    I recommend you test an other modules; for example modules manufactured by Kingston.

  • How to reset the sensor of fingerprint on Portege R700-174?

    Hello!

    my "problem":

    on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

    all systems are protected by password and fingerprints.

    also the win10-test system (for test prints digital-utility in win10)

    now, I deleted an old generation of win10 and do a new install with the latest version

    Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
    to be entered for the new win10 (or any other system)

    My question

    is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
    Fingerprints for this system, which does not exist anymore on my portege?

    Thanks for the tips

    Kurt

    The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
    http://www.MyToshiba.com.au/support/items/FAQ/386

    In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

    See also another thread:
    https://Forum.Toshiba.EU/showthread.php?75917

  • Portege R700-S1321 - cannot set the resolution of 1366 x 768

    I have exactly the same problem, as shown in:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64809

    The resolution of the laptop to random times and intervals seems to support a maximum of 1280 x 700, which translates into a 2 inch black bar on the right side and the button start Windows 7 off the screen.

    Currently its stuck in the resolution of the screen and no matter what I may not make it back to normal 1366 x 768.

    External monitors very well with the laptop work.

    Its 2.20 BIOS execution that seems to me later.

    It seems that the intel driver must get some information that is incorrect.
    Research on different forums and using moninfo, I see that the internal display does not support EDID and settings appear to be set by the registry somehow.

    I also tried to make an EDID override by creating an inf file that is customized with Moninfo, but appears not to the question of the effect.

    I also tried to restore from the recovery many times discs without success.
    During the installation of windows occurs, the screen is fine.
    When Toshiba additional programs are added to the screen returns to the 1280 x 700.
    I suspect that what happens when the graphics driver intel is installed.

    If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

    Anyone else had this issue and understand how to fix it? I see also that intel do not support EDID override.

    Any idea is appreciated. Thank you.

    > If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

    I think you are on the right track, and I think that his untimely pilot.
    That's why I recommend you to uninstall the Intel graphics driver in Device Manager.

    PORTEGE R700-S1321 was equipped with the Intel® Core i5 - 520 M processor and this processor supports the Intel® HD graphics card

    The latest Intel HD driver can be downloaded directly from the page of Intel:
    [Driver for Intel Core with Intel HD Graphics processors | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = Intel % C2% AE + Core E2% 84% A2 + processors + with + Intel % 2 C % AE + HD + Graphics & ProdId = 3231 & LineId 1101 = & FamilyId = 39]

    I need to download the zip package.
    Then you can install the driver through Device Manager by using the Advanced installation procedure. This allows you to link directly to this zip package. Windows system would automatically take the driver. After restarting again you that would have settled the last drivers and you should change your resolution.

  • Cannot use 8 GB in Portege R700

    Hello

    I had 2 x 2 GB PC3 10600 ram in my R700 (i3) running Windows 7 x 64.

    I have a few sticks of 4 GB of ram, I wanted to update my laptop 8 GB total.

    I put in the memory which consists of:
    1 x 4 GB PC3 12800
    1 x 4 GB PC3 10600

    The laptop comes on the screen where it says "Starting Windows" and looks like it freezes before windows animation.

    If I try to use 1 x 4 GB (two speeds) and 1 x 2 GB, then Windows starts fine, but there is a problem when I use both the 4 GB sticks.

    I tested the ram with Memtest and they pass the tests.

    If I put the bars of 4 GB of RAM in a R840 (Windows 8.1 Pro), it starts very well.
    If I put the bars of 4 GB of RAM in a R700 (i5 running Windows 8.1 Pro), this also starts very well.

    If I try to put in the sticks of 2 x 4 GB of ram in the R700 i3 and trying to install Windows 7 or Windows 8.1 then happens to the screen that says "Windows is loading files" and the progress bar ends but then the screen goes all white and the fan runs but nothing else happens.

    I have 8 GB of ram in the R700 i3, so I don't know that it supports. The BIOS detects it has 8 GB of ram when I inserted them and the BIOS is updated to the latest version which is 2.20 iirc.

    Anyone can shed light on the problem?

    Hi Borito

    If the specification states that your model of laptop can handle with 8 GB of RAM, that we should not discuss this topic.
    By RAM upgrade is important to use 100% compatible and two modules of identical RAM (same specifications).
    I tested it on my machine using too much standard and a cheap RAM and my machine was dead. With two modules of identical RAM, everything is OK.

    Can you please send the name of the exact model of your laptop Portege (R700-xxx) and I'll try to find the exact reference for 4 GB of RAM for this model of laptop.

  • Portege R700 - original recovery image re-failed installation

    Hello

    I have a Toshiba Portege R700 for years.
    As I have already some difficulties, I did a reinstall it a few years since the recovery partition. Directly.

    But, a few days ago, I had some problems with my portege.
    HARD drive seems to be broken because it making the noise and was really, really, really,..., very slow.
    Yes, after you perform a backup of the data for hours and hours (remember, it was really, really slow), I run a complete reinstallation of "recovery partition". It seems to be good, but... never finished the process, with the same noise from HDD and slower HARD drive IO.

    OK, my own diadnostic: change the HARD drive.
    This done, and by using the recovery DVD Toshiba just bought (Yes cannot find the DVD of burn of factors), I have the same question.... The recovery process does not end even if im waiting for days...
    And I have the same HARD drive noise. With the new!

    In order to have an MSDN license, I installed a Win7 Pro 32 bit, but not the Toshiba one.

    And he is running for days without any problem!

    But I have to reinstall all the drivers and software supplied by Toshiba.

    Obviouly I prefer to find what exactly is the problem with this Portege and reinstall the version of Toshiba Windows 7 Pro.

    So, if someonre read the story until the question is: NO IDEA?
    How to do a HW diagnosed? How to identify the exact problem?

    Thanks for your help.

    Joel

    It is really strange. You bought brand new HARD drive or you use a old and used as a replacement?
    Have you used recovery disks in the past with success? I mean maybe it's the recovery disc a troublemaker.

  • Portege R700 Wont close or install W7 SP1

    Hello

    I have a Portege R700 for a few months and then only a brilliant notebookI'm having some trouble that I can't find the answer to. I thought I would post the two they could possibly be interrelated.

    First of all, when I am running on battery only my computer usually off. It gets to the Windows stops screen and just hangs. After all of 10 minutes, I have generally give up and manually turn off the machine by holding the power button. This is my desktop computer, it is very rarely used on battery so I have not really worried about it but I want to fix. Also when I use my machine on port replicator, at the office, when I shut down my computer what it comes up with the screen that a program is not responding and force close. I find it strange because there is no program running in time (of course there is probably a background running program).

    The second problem I encounter is that I am trying to install Windows 7 SP1 via the full download of the Microsoft Web site, but when it comes to install the update I get the following error:

    ERROR_SXS_ASSEMBLY_MISSING (0 x 80073701)

    I did a search on the web for answers, but all of the patches described did not work. My only other option might be a complete reinstallation of Windows that I hated doing.

    If anyone has solutions that would be great.

    Thank you.

    Hello

    Why you are not allowing Windows Update to install updates to the machine? This method usually solves 90% update install problems as the update manager download only the sections of service pack required for your installation/version/version of windows 7?

    How does closing? by pressing the power button or by using the windows menu Start button stop?

    When on the port replicator the error message said exactly? What is the name of the program?

Maybe you are looking for