Cracking or delay problems
Hi all
2 days ago, I had no problem recording audio or MIDI.
Last night, I experience crackling or delay and later, Im experiencing them both at the same time.
Signal chain:
Electric cello > amp > MXL 990 mic condensor > AI USB Presonus > LPX 10.2.2 (patch by default cello)
The steps I took:
Close all unnecessary applications
Changed all wires
Portable battery powered
AMPS has changed
Away from the microphone modified
gain adjusted on AI and instrument
computer restarts
Increased frequency of sampling
Sampling frequency reduced
When I lowered the sampling frequency, I get sizzles in reading.
When I increased the sampling frequency, I get a serious delay.
In the last 5 minutes, the 2nd cable would crackle when moved or registration, but my recording rate far
peaked. This is a first for crackles when recording.
PreSonus said that there are no drivers for their audio interface, just plug it in-game.
Ive had LPX for 2 weeks and gave me more pain that GB has ever.
It is a screenshot of my macbook today, with no devices connected. No audio reproduction. I/o is now built by default.
If you move your microphone cable and hear the noise, it's a bad cable, or a bad physical connector on one end or the other.
You check that your audio is not reached a peak in the Red?
What is the size corresponds to your drive, and how much is free space?
What version of LPX?
If you increase the frequency of sampling and get delay, you are irresistible your MBP. You may need to adjust the size of the I/o buffer, and/or delay of recoding.
http://help.Apple.com/LogicPro/Mac/10.2.1/#/lgcpbb81aca5
To do this, as I see that you use the custom view (up to the center of the screen). Double-click the CPU counters and HD. They will open a floating palette. Look and see if there are any major constraint on either during playback.
Tags: Professional Applications
Similar Questions
-
Hello
I did a Labview vibration Analyzer to use with 2 phidgets at the same time, everything works as expected, I was testing the program and it worked as expected, then after a certain time delay has emerged and that the delay was on the rise at the time, graphics began to show data that happened 30 seconds to 1 min before. Since I already knew how to make the program that my teacher suggested that I should make a new one and try to find what was wrong, I did and everything was going well for a while without finding me the problem (there just worked), I had zero delay, but then an hour delay showed once again from a few late seconds and increases. I have no idea why this happens specifically because I do not to save the program and when I start it up again that the delay is there from the beginning, makes no sense to me. Any help would be great, I send the files required as an attachment.
João Pereira.
-
my printer makes a cracking noise strong; problem with the new color cartridge
My printer makes a cracking noise when I turn it on and try to print.
Also, I put in a new color ink cartridge. Sometimes the color looks like it is running out of ink, then next time I have print
something, the color is good
I tried to clean the rollers as you told me. When I turned the printer on again, the fort by clicking noise was gone. I can't believe that solved the problem.
But when I tried to print a greeting card, color before had lines through it, as it does when the ink is getting low.
I just put a new cartridge, so I knew it wasn't ink. I was told to remove the ink cartridge & then put
back in. After that, I printed a map & it was fine.
So I hope that he takes care of my problems.
Thank you very much for your help! I was about to buy a new printer, but it's only 3 years.
Mary Louise
-
Tecra A4 (cracking Sound) speaker problem
Hi there... its been a month I bought Tecra A4 model... I'm pretty happy with its performance except its speakers... They make a cracking sound while playing most of the songs... What should I do? (I have connected the headphones and this noise does not come) Please help me... Thank you!
Hello
can you please try to put the power save the settings of the sound card for "No. Power Savings.
Tell us about the results.BR
Tom
-
Laptop HP Pavilion 15-n077sl: Audio delay problem
Hi all for one year, I bought this HP laptop.
My problem is that after a while he began to "shots" of the audio in the video games and 3D activities if one wants to clarify, I do not know how to do what I thought was a sound problem and I tried to remove all the drivers, but not...
I thought it was the video card of the problem, but nothing.
How can I fix these annoying audio plans while I play?
The laptop is fine, I also have the support to get cool Ventolin but nothing.
Oh and it is normal that the laptop works only the main gpu?, even if you select the nvidia processor card works however incorporated.
Help me please
Sorry for my loser English.My PC has windows 8 and not 7.
The system goes quickly, everything only happens while I'm playing.
Even, I dropped the audio latency as says nvidia in but nothing. -
When I try to close it (using Windows XP Professional) it takes 2 minutes to the menu "shut down and closing of session/restart" to appear, but after selecting "shutdown" it goes back to my office and does nothing except the icon flashes, then I have to do to shut down a second time to get the computer to stop - suggestions?
Hello
Try to log in as administrator or another account to confirm if you are facing a similar problem in other accounts as well.
You can try to clean boot your system - http://support.microsoft.com/kb/310353
I hope this helps.
-
Each keystroke must be pressed for about two seconds before this character will appear. How to return to normal operation? Wireless Desktop keyboard.
You need to do a small base in case of problems, for example
- Is this a recent problem? If so, what has changed?
- The problem persists with another keyboard?
- It persists when you start the computer in Mode safe?
- He persist when you press F8 during startup, and then start the machine in Windows Repair Mode?
-
Select list type delay problem
I have a Select list with a couple of hundred values produced, in alphabetical order. The first characters of each value in the list is an identification code. In our society, that we know and make reference to our products by their identification codes, and we know them quite intimately. So instead of scrolling to find the ID that we want, we will often simply press the drop down arrow and start typing the identification of interest code, and the advance list automatically to the appropriate location.
So let's say our identification code is CBX197. I hit the drop-down arrow for the field and start typing: C B X 1 and then I pause briefly after typing these four characters (somewhere between 1/2 and 1 second). At this time, these previous characters I typed are "forgotten", so that when I hit '9', hoping to jump down in the section CBX19 of the values, instead it jumps to the first code ID that begins with "9", as if I had never typed the first four characters at all.
So the question is: that that the amount of time that typed characters are held in the drop-down list of controls buffering before being thrown out and is this amount of time something that we can control in Apex? I would like to be able to specify that the buffer is valid for x number of seconds.
Maybe it's just a built-in feature of drop-down lists in general, and there is nothing that can be done about it. But I thought I'd ask anyway.In my view, it is HTML implementation, could not see a way to change behavior at the Apex.
My suggestion to approach, especially due to the high number of options in the list, would be to set up a "list of AutoComplete" (Ajax based), as this demo:
http://Apex.Oracle.com/pls/OTN/f?p=31517:53 -
Satellite A100-599 noise in Vista seems to be distorted and cracked
The sound on my Satellite A100-599 seems to be very distorted and cracked.
The problem seems to be new, it happens on the screen of welcome in windows vista and in some applications and gamesAlso, it does not appear if you connect the headphones?
If you can hear also cracked and distorted sound through the headphones, the problem may be related to software or the sound card problem.In the first step, I recommend you remove the old driver and install a new one from the Toshiba page.
If this does not help, try to clean the registry and system files, use applications freeware called CCleaner.
This program is great and can repair your system and registryIf you see any improvements after these two procedures, I recommend reinstall the OS from the Toshiba restore CD.
But please don t forget to create a backup of your data and private files because a new installation will format the HARD drive. -
Dell XPS 15 Audio cracking network card
Hello
I get audio cracks, stuttering, delay on all programs, all the time, when I have my active wifi. I pin pointed the device using the DPC latency. I tried the update audio, video, and network drivers to the latest versions and roll back to the previous ones, no results. Any ideas, or do I just bring my laptop to the service center?
My laptop is Dell XPS 15 L502X, NIC Intel 1030 N.
well, disabled funtion Malware Bytes Antivirus Web site blocking, it seems ok now. Antivirus programs are crappier every day.
-
Does anyone else have a problem of lag with InDesign?
Since I installed the latest update InDesign, I feel a shift (short waiting time) when clicking, scrolling, highlighting, etc. It happens at a rate that disrupts my workflow, so I now ask for help.
Running InDesign 11.1.0.122 on a MBP OSX 10.10.5 running. Always have 2 GB of RAM open as well when I check my activity monitor.
Thanks in advance.
Hi Dinesh,
Thank you to lend a hand. I can confirm that the problem started after the update to the latest version of InDesign. I did some additional research and found that if I 'window' in the menu and then on the 'Application Framework' bar delay problems went away. Not sure why this works, but it has so far.
Thanks again,
JP
-
Satellite Pro S300-120 does not start after replacing the CMOS battery
Hello
My friends laptop - a S300-120 - was having a few problems.
I replaced some parts about this before, including a screen crack with no problems.
However, he began to refuse to start saying "out of battery CMOS, Press F1 to enter setup". Of course you would have to do this, set the date and time, except & restart only to get the same message. We have replaced the CMOS battery with a with the same serial number and now the laptop will not boot.
It does one of two things.
It is one) seems to turn, turn to the top disk & CD player, cooling fan is 100%, then flashes the POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.
Or (b) turns on, turntable, does not turn up to cooling fan, POWER ON witness remains stable, no response from the keyboard or LCD.
I re-assembled the laptop several times & can not find all the missing fittings or obvious signs of damage.
The only thing I can think is that the motherboard has been damaged - somehow find replacements is delicate.
Any ideas?
Hello
(> It is a) appears to turn on, turn the disk & CD player, cooling fan goes to 100% and then flashes him
POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.
Usually, if the voltage in abnormal feeding malfunctions when IN DC will be blinking orange.In my opinion, it looks like a problem with the motherboard :(
Eventually, you will need to replace the mobo ;( -
Satellite A300D - 214 PSAHCE - overheating and stuttering
Hello world
I am using Toshiba Satellite A300D-214 and I have serious delay problems. I can't play a game properly. I said that I have these questions for the technical department, but they said it's because of the dust.
After 2 hours of cleaning, I encounter the same problems, but they said I have to pay 50 lire (which is almost ~ $ 25) to check if there is a problem in my computer, even if I have the warranty, and if it's graphics card, I have to buy a new graphics card as the warranty has expired.
What can I do to fix this?
Hello
Which driver of video card you are using?
Toshiba GPU driver should be used because this driver supports the thermal protection that protects the GPU from damage.
Use of other drivers can lead to higher heat dissipation and a higher temperature. -
Why it takes so long to open a connection to a shared variable, the first time?
Hello
I have an application to large scale developed with LabVIEW DSC, which covers multiple computers on a LAN. In one of the VI I open variable connection shared by using the "open Datasocket' VI. I notice that after restarting my computer and execution of this VI into the source code (I have not tried with an executable file yet) it takes about 20 seconds to get a successful connection to a variable share located on another computer. The later 'Datasocket Open' claims the same computer to the same shared variable takes much less time, about 100 ms. I reproduce this with 3 different computer, so the behavior seems to be reproducible, but it's not to do it every time but very often. This scenario may occur also when I did not open a connection to another computer for awhile.
Anyone have this experience? Is there something I can do all this to avoid this 20 seconds delay problem? Anyone have an explanation?
All of my computers running Windows 8.1. I'm using LabVIEW 2012. All my firewalls are 'off '.
Thank you
Michel
Here is a picture of my open VI.
Recently, I did this for another client. You can emulate a timeout (and actually connect faster) by using the function "open in background" and then checking the variable.connected? property.
-
IEEE1394 / Firewire chip current T - / W-Series
Hello
can anyone provide information about which chip IEEE1394 is used in appropriate models of the current T and W-series? The driver card reader suggests Ricoh, aynone can confirm this?
Also, is there some laptops Lenovo known to use TexasInstruments-Chips for IEEE1394?
Thank you and best regards
OK, I finally connected my M - Audio Firewire 410 to the FireWire of T530, and unit.
No pop, cracking or other problems when you work in my APPLICATION using M-Audio ASIO drivers.
Clicks or cracking appears only when I let my DAW open and then try to play a video file
WMP or try to watch a video on Youtube, Ditto for playback of audio files in Winamp and WMP
(6.4 - old school). I expected to crack and burst when you work in my DAW using ASIO
only drivers, so the questions I have met are not that big of a deal.
Hope this helps (person), because I wasn't able to find much info about when buying my T530
the combination of Thinkpad chipset firewire port and material M-Audio (I do not know if it will be
work with other audio hardware but it - will probably not miss trying to be before buying if you get the
chance).
Maybe you are looking for
-
My Safari is Version 9.1.2 (11601.7.7). I think I had 10 Version before installing El Capitan.
-
Tecra A2 - striped screen of the chassis
I have been using a Tecra A2 for about 6 months again and one of the first things that I noticed that the screen comes into contact with the body and created a line of 2 inches over the entire surface of the screen. This is usually not serious, but a
-
Hi, I bought a new Iphone 6 s and made a backup of my old Iphone 5. The backup is visible in my new phone, but it is not clickable. Help someone?
-
Can connect is no longer with my external hard drive.
I started getting this message while trying to connect to our external hard drive: no more connections can be made to this remote computer at this time, because there are already as many connections as the computer can accept. We use it to transfer
-
Loading in Eclipse signing keys
I received my two SJC files for signature by e-mail. Eclipse asks a .zip file when you request the signing keys. I checked the docs and I can't find information on how to create this .zip file or what steps I have to take after receiving the email. I