Crash blue screen and restart

Similar Questions

• iPhone 5 shows blue screen and restarts automatically

  iPhone 5 shows blue screen and restarts automatically

  1. try to do a reset by pressing home and off/power button together until you see the Apple logo, then release

  2. If you can't do it you may need to restore the phone via iTunes

  (1079)

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP computer shows a blue screen and restarts.

  * Original title: Puzzle blue screen

  I tried to help a friend trouble shoot a problem. Its a HP computer, displays a blue screen and restarts. We are unable to read the message. I went through the newspaper and cannot determine the cause error. I have several possible solutions thanks to this forum, but I'd like to have someone looking at the landfill to see if I'm on the right track. It seems to me that it could be a power supply problem.

  Here is the link on Onedrive for minidump files that I found.

  Thank you.

  WPD50

  No puzzle here.  Symantec is killing netio.sys.  It should be removed and replaced by MSE

  Symantec is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• Laptop guard crashing and showed a blue screen and restarts... :/

  Hello, my laptop is running win7 and while using it, it was make a blue screen saying out of memory error or something like that and then restarting itself... to come and also he has been doing all these messages in error and programs are not loading sometimes... can someone please help me?

  Hello Mr.Fooh,

  Thanks for the return of the answer!  To disable automatic reboot, this will prevent her to stop and I hope you will see messages or error codes.

  Regarding the response of Vinod N, you have attemtempted to try the method above 2?  There are several steps to try and would like to know the status.   I would try to start your computer in Mode safe mode to see if you encounter the same problems.

  Blue errors in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Thank you

  James

• Computer Vista becomes errors with physical memory dump blue screen and restart

  I have a problem with my computer going to a blue screen, dump physical memory saying and a lot of other things, then by restarting. It grows more and more frequent.
  Please help and thank you

  You have several errors:

  LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  Control bug IRQL_NOT_LESS_OR_EQUAL 0x0000000A value a. This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.

  One of the mistakes led to the crash by aswsp.sys. The rest of modules of windows so other thing he led to the crash. So its best to start with aswsp.sys. This file is part of your avast antivirus software. I would download the latest avast antivirus. Uninstall the version you have and install the latest version. I'd also that you have the latest windows updates and patches. Once you've done that I could monitor and see if you have more blue screens.

  Free Support Tools

• Satellite A500 - 19(d) - blue screens and restarts suddenly

  I am the most unfortunate customer or this model again? No one has problems with the A500 - 19(d)?
  I bought, five days ago a new. First start: blue screen. Second: blue screen. Third: F8 safe mode → → can through the entire current configuration.
  Then start: party started. A few times the blue pro displays time and restarts. Tempro have 2 messages based: BIOS and WLAN driver update. Update BIOS message: your BIOS is newer or the same thing. Updated WLAN: no driver for my Realtek RTL819 * 1 * SE for Win7.

  Two days in vain have off turned parts and drivers downloaded. Third day: I have restored the laptop in its original original (thanks to the recovery of hard disk based) configuration and wanted to put back to give. But a small miracle happens (it's Christmas... or?)  :-)): no more blue screens. OK... just to start, it starts two or three times until OK and then just two or three times suddenly restarts a day. Yet once the drivers downloaded in vain. No change. Someone has an idea? It must be something wrong with the drivers in safe mode, that's OK. Again, there should be a driver it is loaded at startup (blue screen of the first and the second). I really like this laptop but have bought for work not for pleasure and, in this way, its quite risky, so I have to change them.

  Stand by. Maybe I've misunderstood something and have to ask you once again: have you noticed this BSOD problem with State factory and without additional software installation?

  Last month I had friends Satellite A500 for the test and I did not notice this kind of problems with original Vista and also clean install of Win7.
  If you really think that it can be risky for you I recommend you exchange it again.

• Windows XP SP3, the blue screen and restart loop

  I use Windows XP SP3. I have the blue sreen of death and I'm in a reboot loop. I don't have a CD with the operating system, as was pre loaded on the laptop. on the blue screen of death, let me stop error:

  STOP: 0 X 00000024 (0 X 00190203, 0X8713F238, 0XC0000102, 0X00000000)

  Can someone please help?

  This error indicates a problem with the NTFS file system.

  You will not be able to boot in a mode any, until resolve you the file system.

  You need start in the XP Recovery Console and run chkdsk /r to see if he's going to clean it up.

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Z240 HP SFF: HP SFF Z240 random crashes, blue screens and crashes

  Hello

  My work machine is a Mini PC Z240 from HP. Last month, the machine began to hang randomly and display blue screen errors. There is not much in the way perceptible models, but it tends to happen when the machine is in use, rather than the idling, and I can reproduce it systematically using the constraint of Prime95 test utility. When I put it to maximize the heat of CPU, as soon as I stop the test, the screens of the blue machine, which indicates a cooling issue.

  Fan of the machine is very quiet, although occasionally he becomes very strong after a reboot and then quieted down.

  I think the fan to get a louder as the CPU gets hotter during the stress test, but this does not happen, so I wonder if the fan is defective, and if it is a known problem with these machines, or if there is no possible resolution.

  Please see below for the output of BlueScreeView, which displays error codes produced by these last blue screen errors.

  

  Hi @ericchubb,

  You try to update the BIOS on the unit, here is the link to download, choose the operating system and download the required file.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=8323799 & swLangOid = 8 & swEnvOid = 4059

  If the problem persists, I suggest you to contact Hp support and make a request.

  Worldwide contact HP:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  I hope that answers your question.

  I am an employee of HP, the views expressed here are my personal opinions, not HP.

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the left side of my post to recognize the message *.

• c9m35pa #acj: blue screen and restart all of a sudden

  allways I have this error specifically when I play .and 3D games I am trying avery solution mentioned in the site Web of You ' r. Please tell me what is the problem. This is the test of drivers:

  

  Hi there @karimkid

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you get a blue screen when you play games. I'm happy to help you with this.

  Do you get the blue screen frequently during regular use?

  Is there a specific error displayed on the screen when the blue screen occurs?

  The laptop seems to excessively hot? Often, when a system made more graphically intense operations, the GPU is to extinguish much more heat, especially in prolonged use. It may be a heat problem.

  HP Notebook PC - reduce the heat inside the PC to avoid overheating
  HP Notebook PC - why computers generate heat

  Also, you can find these help, because maybe some adjustments of the system would help.

  HP computers - resolution (Windows 8) slow system performance
  HP computers - Windows 8 stops responding or becomes very slow after you connect to the Internet
  How to speed up boot system and performance times

  Let me know if this has an effect, or if not, what changes if any errors appear.

• PE8 crashes, blue screened and trashed the project!

  Sigh... someone create DVDs using recent PE8 and HD video in a DSLR?  I tried this weekend, and it's really ugly.

  1. whenever I try to open the grave PE8 Panel transitions down.  End of session without any resumption of work being edited.  And it gets worse.

  2. I did my video without transitions, then went apart to create a DVD.  Blue screen of death.  IPF in nonpaged area or such nonsense.  I repeated 3 times this, thinking that it must be timing something.  And it's even worse.

  3. I decided not to do a DVD, just a video online. PE8 now reports my project cannot be opened.  It is damaged.  All those hours of wasted editing.

  It's bad enough.  Is anyone using the elements of Prime Minister to edit video from a HD camera? If someone is doinf this, I would like to know how to work around what appears to be the killer of bugs in PE8.

  I use a Nikon D7000.  I did a lot of video using PE4, 6, & 8, using still images and video standard digital and especially it work OK.  This experience is so bad that I wonder if I need to switch to products from Apple to HD video.

  This is Ole Pa new reporting PROMBLEM RESOLVED.  How?  I just bought the upgrade to Premiere Elements version 10. and the same project without modification to the project or my computer now makes the DVD instead of taking down my PC with the Blue Screen of Death.  Adobe never helped me with this problem or suggested that this might be a bug in their program.

  It is difficult for me to undersatnd why Adobe don't let not their paying customers help them find bugs in their products.  This seems to be an example where "crowdsourcing" could help them get the best products without a large part of the costs for them.  Adobe users, help other users of Adobe is a wonderful thing (and thanks to Adobe for providing a service that allows us to do), but as this folder, users of Adobe cannot fix bugs in the Adobe code.  Only Adobe can do and if listen to use we could help them to do so.

  I am very happy that version 10 has fixed the bug that interrupted my months project; and I hope that someone in Adobe will look at these forums of supervisory and allowing users to help Adobe to find and solve problems.

  -Thank you, Ole Pa

• blue screen and restarting the round due to the update of windows

  Windows Update-
  Configuring updates step 3 of 3... 0%
  * Blue *.
  * restart *.
  Configuring updates step 3 of 3... 0%
  * Blue *.
  * restart *.

  stuck in a death spiral
  safe mode, says I need to enter the command ' rstrui.exe / OFFLINE:C:Windows.
  to get to the system restore.
  I do it, so he said there is no restore point when I KNOW there is.
  I need your help D:
  * cries *.

  I don't even tell it to do updates , but it still it still... I just put it to sleep, then I find it panic!

  Hi Lily T,.

  I suggest that you provide a blue error screen make sure to disable the auto restart for windows update

  http://support.Microsoft.com/kb/555444

  For more information, please follow the link below?

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

• Windows 8 blue screen and restart after sleep

  I'm screen geeting blue of death and the computer restarts the computer wake from sleep.how to solve the problem.i updated all the drivers.installed all the updates of windows, but the problem is still there.what to do every time? OS is windoows 8

  The minidump files show a stop error DPC_WATCHDOG_VIOLATION (133) which seems to be caused by the Accelern.sys:

  BUCKET_ID: 0x133_ISR_Accelern+ 13f2

  
  

  The Accelern.sys, which is dated December 13, 2010, seems to be 'Sensor accelerometer pilot' "ST Microelectronics.

  This driver should be updated or replaced if possible.

  Try the next update:

  http://www.Dell.com/support/drivers/UK/en/ukdhs1/DriverDetails/product/XPS-L502X?driverId=KT7XG&osCode=W864&FILEID=3080904014&LanguageCode=en&CategoryID=UT

  If possible to uninstall the old driver before you install the new driver.

• System will not start completely, blue screens and then restart

  Well, I need serious help. I have Windows 7 and installed Ubuntu on my XPS M1730. Yesterday my laptop shuts off and when I went to put it back on it would start start and then blue screened and restarted, continuing the cycle. I tried to use the system restore (Gets an error). I also tried to reformat using the Windows Vista disk that came with my laptop. It does not start, it just goes to the screen where I can choose between Windows 7 and Ubuntu. My friend is here and I'm on this laptop, and we wanted to play our game together. So please help quickly (if it is a command line or other) then we can game. Thank you :D

  To boot from a DVD, positioned on the BootOrder:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Portege Z30-A-1E1 - blue screen and reboot

  Hello

  I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.

  I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
  In the event log windows that I can't find anything that clearly led to a cause.

  I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.

  Anyone had a problem like this?
  Any suggestions for debugging?

  Thank you very much!

  Hello

  I don't have a complete solution, but perhaps a step on the way.
  I would say first to disable the auto restart when a blue screen appears.
  This way the error message will remain on the screen until the PC is turned off.

  Know how prevents automatic restarts here:
  http://www.troubleshootwindows.com/w...-8-7-Vista-XP/

  Tom BR