Crash on Windows 7 NVIDIA drivers

Similar Questions

• My NVIDIA drivers causing windows 7 64-bit ultimate freeze on the windows logo

  My computer takes over until the windows logo starts to blink before the transition to the screen of the user chose and then just abdou.  I tried runing the difficulty of starting and it came as unable to repair, I tried to restore to the most recent restore point and had the same problem.  Has no problem starting in safe mode.

  I thought I had fixed, removed the display drivers and it boots perfectly
  Then I tried install the new NVIDIA driver and he got as much as the black screen with the mouse pointer, then screen off because no signal (not edge of speakers either)
  I tried NVIDIA Beta drivers and same problem
  Tried to leave the car computer to install the drivers and rebooted and got it works well, played Diablo 3 for 3 hours, left computer sitting there in the form of the characters (and so do nothing) is back and it has been turned off
  Problem of windows back logo on and freezing at the back, tried to install the beta drivers and got the same thing
  Boots fine in safe mode
  Boots fine when removing the drivers
  I tried all of the NVIDIA drivers I've had since March and it is beta (which is what I was running) for the current drivers and today
  I would have posted this to NVIDA but it forums are down
  It worked perfectly until yesterday
  I run a GTX 460

  Try the driver Nvidia 296.10. I have a GTX 460 SC and that this driver is stable.

• Some rather illusory BSOD and crashes on windows 7.

  So for the past month I have been doing some strange crashes and BSOD that have been in every sense. I've been on Reddit and impossible to get a solution, I have reformatted, which does not set it. I've been on with the technical support of Microsoft support chat and can not get a definitive answer (they spend hours and a symptom of trouble then send me on my way). Accidents and the BSOD happen a crapton all in one day, it's good for several days, then it's a crapton while a new day. I just assumed it was graphics so I uninstalled and reinstalled. No solution. I assumed it was ram, so I change RAM, using just a single chip, get chips on other computers, including the chip switch is in what location, perform a test of memory, no solution.

  Apart from just BSOD I have therefore also get those pips weird screen that blur the screen and resemble a classic movie scene where a security monitor is hacked. Or sometimes I can be working away and suddenly the computer starts up without ever giving any warning or anything.

  Here are the BSOD logs that I have. He did TONS more than that, but more often it does not really give me a journal later.

  Crash Dump Analysis

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Thursday, October 6, 2016 10:33:43 PM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: unknown (0xFFFFF80002D38344)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002D38344, 0xFFFFF880067AAD40, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error.
  Google search: SYSTEM_SERVICE_EXCEPTION

  Thursday, October 6, 2016 20:18:22 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\100616-25740-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 70150)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 3, 2016 17:22:27 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\100316-48391-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0x780C)
  Bug check code: 0 x 116 (0xFFFFF8800490080C, 0xFFFFFA8007F784E0, 0 x 2, 0 x 0)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  Saturday, September 24, 2016 9:53:06 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092416-62416-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0x780C)
  Bug check code: 0 x 116 (0xFFFFF8800453A80C, 0xFFFFFA800D828010, 0 x 2, 0 x 0)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  Thursday, September 22, 2016 6:59:12 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092216-29250-01.dmp
  This was probably caused by the following module: tcpip.sys (tcpip + 0x52A73)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  path to the file: C:\Windows\system32\drivers\tcpip.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: driver TCP/IP
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Tuesday, September 20, 2016 17:47:17 this computer crashed
  crash dump file: C:\Windows\Minidump\092016-62213-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x5A88)
  Verification of error code: 0 x 24 (0xFFFFF8800A5E5A48, 0xFFFFF8800A5E52A0, 0x1904FB, 0xFFFFF880012A94E4)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Monday, September 19, 2016 5:38:40 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\091916-39905-01.dmp
  This was probably caused by the following module: unknown (0xFFFFF880013E86E4)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error.
  Google search: KMODE_EXCEPTION_NOT_HANDLED

  Hello

  Although there may be other factors at play that video drivers ATI are involved as well
  Check with Support ATI, their drivers and documentation online and ask for their
  Forums about known problems.

  AMD/ATI - assistance and pilot - search
  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.2&product=2.4.2.3.9&ContentType=GPU+download+detail&OSType=Windows+8+Preview+-+32-bit+Edition&keywords=&items=20

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  However, given that you re-installed Windows there must be a hardware or BIOS.
  driver Chipset or other very low level driver problem. So anything you can update and
  use the other methods below.

  ==================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section because if you
  may or may not start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Vista and Windows 7 updated drivers love then here's how update largest. References to the Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - see
  Hide Microsoft drivers - updated those without drain in their names. (Also update BIOS and drivers from the chipset.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to turn off the pilot facilities in Windows updates, that leaves is to Windows Update, but it will not install the drivers who are generally older and cause problems. If updates offers a new driver and then hide it (right click on it), then go get new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - right click - Memory Diagnostics tool follow RUN AS ADMIN instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ================================================

  After doing ALL the updates you canand if the problem persists, run
  DriverVerifier.

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7. (8/8.1 and 10)
  are essentially the same).
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff545448%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message.
  Also check with MyEventViewer when the blue screen.

  If DriverVerifier creates a minidump download and post the link here so that we can
  analyze it.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Photoshop Elements 11 crashes in Windows 8

  Just bought Photoshop elements 11 and it crashes when editing photo. It seems to be reproducible in trying to alter any image, although it crashes several times.

  Don't know exactly how to get discharge/track of Windows 8 on it.

  Thanks for your help!

  Thanks guys, as it turns out that I had the same problem even when configured

  with a single monitor.

  For fun, I uninstalled the "3D video" and "PhysX" software that is

  installed by default with the NVidia drivers. I'm not sure one of those

  He could, but the app works very well now that they were abducted.

  I appreciate the help!

  -James

• Why Firefox 27.0.1 is so slow when I use the NVidia drivers?

  Windows 8.1 using 64-bit and the last drivers Nvidia (NVIDIA Quadro FX 380). Firefox, it takes about 6 seconds to start. When I remove the nvidia drivers, Firefox starts quickly again.

  You have enabled drivers NVIDIA and acceleration hardware tour?

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

• Satellite X 200 - 23 g - black screen after install NVidia drivers

  The problem appeared after reinstall Windows XP Professional. With installed NVidia drivers (179.28) after reboot the screen is black. System booted normally, sounds, it has played. With no installed NVidia driver picture is normal. After reading forums I understand this problem with properties of the monitor's EDID.

  Linux systems to use the UseCustomEDID property, and use received monitor EDID struct everything works fine. Windows not not a similar option. Also, it is impossible to complete the installation from a resuscitator of disc. Black screen on the final stage. To restart with the mode VGA Vista say, who is unable to complete the installation in this mode.

  Can you help me?

  Hello!

  I've never heard of this EDID you want to say, but you should use Toshiba drivers.
  Because no Toshiba driver don t have the graphics card overheating protection can overheat. The graphics card may be damaged.
  With the Toshiba drivers, you are on the safe side

  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Then try to start in safe mode, remove the old graphics driver, restart the computer and then install the drivers of Toshiba.

  Good bye

• HP Envy 700-414: HP Envy 700-414 Office windows 7 64 drivers

  I didn't like Windows 8.1, because of crashes and recoveries almost every day. So I contacted HP, does not and according to the frustration, I erased the hard drive, disk recovery and all partitions and installed Windows 7 ultimate 64 not knowing not only desktop 700-414 HP Envy Legacy CMOS and HP support don't like no change of. Also, the biggest problem is supported for the HP Envy 700-414 Office windows 7 64 drivers are extremely hard to find, especially drivers LAN Modem, if they exist in HP supports. What can I do?

  Hello:

  This model has the same motherboard as you and has a complete set of W7 x 64 drivers.

  Do not use the BIOS or the files of the firmware of this model on your.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-700-200-desktop-PC-series/5399651/model/6529898

• Can satellite P500-12D - I use the nVidia drivers?

  The latest NVIDIA drivers on update from Toshiba website are 8.15.11.8642, but there are newer versions on the NVIDIA site. I would like ot update the NVIDIA drivers but I have any difficalties.

  I tried to install version 195.62 (Win7 64 bit) for the Geforce 200 M series fron the NVIDIA SITE but installation is not complete. I get the message: "Setup NVIDIA didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »

  Toshiba only allows their own versions of the drivers? Is there a way to enable the NVIDIA drivers to istall?

  SYSTEM INFORMATION: operating system WINDOWS 7 64 bit
  Date 03/01/2010 01:14:58
  [Information on PC]
  Model name SATELLITE P500 12D
  Part number PSPG8E-01D007EN
  Number of series x
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS V2.50
  Processor Intel (r) Core (TM) 2 Duo CPU P7450 2.13 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 749,744,054,272 [bytes] 698.254 [GB]
  Capacity of the hard drive space free 644,687,319,040 [bytes] 600.412 [GB]
  Video * NVIDIA GeForce GT 230 M * version = 8.15.11.8642
  Screen resolution 1680 x 945 Pixels
  Color quality, true color (32 bit)
  Version of NVIDIA High Definition Audio sound = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Conexant Pebble high definition SmartAudio version = 4.98.6.63
  Network version Atheros AR8131 PCI - E Gigabit Ethernet Controller = 1.0.0.17

  MAC address = 00:26:9E:90:F3:E7
  Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

  version = 2009.1.1222.2009 = 00:26:B6:9 A MAC address: 1E:2F
  No modem
  Internet Explorer 8.0.7600.16385
  Device IDE TOSHIBA MK5055GSX
  IBG 4H6Z0XEVG SCSI CdRom Device = 1.03 FW version
  HL-DT-ST DVDRAM GT20N FW version = tm10

  [Information QFE]
  Windows security update "KB973525.
  Windows Update "KB974332.
  Windows Update "KB974431.
  Windows security update "KB974571.
  Windows Update "KB975364.
  Fix Windows 'KB975467.
  Windows Update "KB976098.
  Windows security update "KB976325.

  Hello

  Counter question: why you want to use any other display drivers? Are not satisfied with the drivers of Toshiba or can you notice problems in Windows?

  Theoretically, it is possible to use the nVidia drivers directly but don t forget that they are not pre-tested on your laptop. Your graphics card could be overheating and so you lose the warranty.

  Satellite P500 is fairly new, so I guess that Toshiba updates the display driver in next time too. Take a look at the page from time to time. ;)

• Satellite A660 - 11 M: the display does not work with nVidia drivers

  Hello world.

  First of all:

  I use the default pre installed SB (w7-64) and nothing more is installed on it, except the toshiba software.

  The problem is that, while I use the default driver installed that everything works well, if I update the nvidia drivers, I can't change the brightness more.

  It cannot be changed by fn + f6/f7
  cannot change it in windows through "brightness".
  no change in the power management profile.

  (I can put different brightness levels, but nothing is happening!) (I hope you understand what I mean)

  the only way to do it is using nvidia Control Panel.

  even if use windows utility to update windows drivers download the same drivers and there is the problem.

  the only way to fix it is to reinstall the default driver.

  but I don't want to use the prehistoric driver!

  How can I do to fix this? is this a known issue?

  Thank you very much for your help!

  Hello

  Since the nVidia page nVidia drivers are not pre-tested and not certified by Toshiba, it s not recommended to use these drivers.
  You must use graphics drivers of Toshiba because the drivers are modified and created for the use of the laptop. These drivers support own device of thermal protection that protects the graphics chip.

  I think that the issue has nothing to do with the Toshiba FN button software because brightness can be affected, even using Windows 7 power management

  I recommend to go back to the original drivers Toshiba!

• Music Maker 16 crashes in Windows 7

  Whenever I run MM16 in windows 7, it freezes. The only way I can get out is obtained in Manager tasks and complete the task. I contacted Magix through several emails and got nowhere. I am very satisfied with their lack of technical support. Does anyone know a fix for this problem? -Thanks!

  If you have upgraded from Vista to Windows 7 have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• "A dynamic link library (DLL) initialization routine failed." NVIDIA drivers

  So I recently wanted to install new NVIDIA drivers on my computer.  The installer downloaded completely and at the time where he finished extract the files of the error "a dynamic link library (DLL) initialization routine failed."  Since then, I uninstalled my drivers and I can't always install the new drivers.  Now I'm stuck with no driver at all.

  I asked this question on NVIDIA support page and have not received a response, so I came here to ask.  Help is very appreciated.

  Thank you

  I understand your willingness to help me, but I have advanced and reinstalled windows. Got the new driver installed and everything works fine.

  Thank you

• 27 a XPS cannot update to the latest NVidia drivers

  Hello!

  I have some GFX linked the issue to be resolved, and for that, should be update my GFX NVidia drivers latest version.  The GFX card is a NVidia GeForce GT M 640 with drivers V. 295.55 on a Dell XPS One 27 i7.

  First of all, I went on NVIdia's web site to see what was available, and what they have is V. 310.90 released January 5, 2013. It is also what is recommended when I run the scan on my system.

  After unpacking, installation fails constantly and mention the graphics hardware is not compatible. (???) Whatever happens, it will fail even if the card is known to be compatible.

  So I'm at the Dell driver download page and hit him with my service tag. I downloaded Dell recommended video driver for my system, to realize that this was not the most recent. Then...

  Any ideas how can I update my GFX drivers?

  Thank you!

  Remi

  NVIDIA does not OEM and INTEL.  Driver NVIDIA N13P GS is the last Dell.

  June 2010 DirectX DXSETUP. EXE is also recommended for XP, VISTA, WIN7, WIN8.

  Use DirectX Runtimes (June 2010) - Microsoft

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8109

  This means that if you have OPTIMUS then the Verde drivers will not work.

  Video - driver

  Description	Importance	Version	Published	Supported OS	Download
  NVIDIA N13P GS driver NVIDIA N13P GS driver	Recommended	9.18.13.697	21/11/2012	64-bit Windows 8
  Intel GMA HD IVB (GFX driver) Intel GMA HD IVB (GFX driver)	Recommended	9.17.10.2857	25/10/2012	64-bit Windows 8
  Intel GMA HD IVB (GFX driver) Intel GMA HD IVB (GFX driver)	Recommended	8.15.10.2696	21/08/2012	Windows 7 64 bit
  AVerMedia H339 ATSC (USA & S .Korea) (pilot TV Tuner) AVerMedia H339 ATSC (USA & S .Korea) (pilot TV Tuner)	Recommended	2.2.64.72	14/08/2012	Windows 7 64 bit
  AVerMedia H339 DVB - T (driver TV Tuner) AVerMedia H339 DVB - T (driver TV Tuner)	Recommended	2.2.64.72	14/08/2012	Windows 7 64 bit
  NVIDIA N13P GS driver

  
  NVIDIA N13P GS driverRecommended 8.17.12.9555 14/08/2012 Windows 7 64 bit DELL, SRV, DRVR, TVT, INTREPID II, 2710, 1.0.590.30027, A00
  Pilot Hauppauge DMB - TH TVT Recommended 1.0.590.30027 29/05/2012 Windows 7 64 bit

• Impossible to update the NVidia drivers

  I got following update for my Lenovo Z50 - 70

  nVidia - Graphics Adapter WDDM1.1, WDDM1.2 graphics card, graphics adapter WDDM1.3, other hardware - NVIDIA GeForce 840 M

  I have download and update with this one, the machine begins to malfunction. The brightness is automatically increased and reached a static condition (i.e. not modifiable). Some time Blue Screen of Death thing happen. Then I have no choice but to cancel the update.

  Please remove this update of the said machine. System works perfectly well without this update.

  Hello Amish,

  Please provide a detailed description of the issue.

  I certainly understand the inconvenience caused to you.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Do you receive an error message? If Yes, what is the exact error message?

  2. You did it all changes (hardware / software) on the computer before this problem?

  It is possible that this problem would have occurred due to incompatible NVidia drivers in the system.

  I suggest to download the latest driver from the NVidia site and then try to install in compatibility mode.

  Please follow the steps in the Microsoft Help article below and check if it helps.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  For reference:

  To install the NVidia GeForce 840 M drivers, please follow the link below.

  http://www.GeForce.com/drivers/results/83821

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Install the latest Nvidia drivers on ENVY 17 t-j100 Leap Motion with 750M video, need help.

  I went back to the ENVY 17 t-j000 about 6 months ago because I could not install the latest Nvidia drivers. My brother has this laptop and after a few months, HP made an update of the BIOS and now it is able to install the latest Nvidia drivers very well.

  So I decided to try again the ENVY 17. This time, I had the model Leap 17 t Motion - j100 with 750M versus the graphics of 740 M.

  I downloaded the latest drivers from Nvidia and actually installed Nvidia. Rebooted and everything seemed fine. But he wouldn't let me not use the Nvidia Control Panel, because it seems that the screen was not connected to an Nvidia GPU.

  So I tried to install it again and choose the Clean install option. But to say question.

  Then, I did a complete uninstall of the Nvidia drivers and rebooted. Now when I try to install the Nvidia drivers, he says that does not find any compatible hardware. I did it today with the same single download from Nvidia. I don't know why he has installed two times before without any error and now it says that I don't have an Nvidia card.

  So TWO things:

  1. download the latest version of the driver reinstalled again.

  2 fix the error "No Nvidia GPU not attached" when you try to use the Nvidia Control Panel.

  I have all the latest Windows updates and updates from HP. I don't see the BIOS updates. Any ideas?

  As of today, I am able to install the latest drivers Intel and Nvidia available:

  • Intel provided HD 4600 driver version date 31/10/2013 10.18.10.3345 - via manual update disk, not the .exe installer method.
  • NVIDIA provided WHQL certified version release date 07/01/2014 332.21 (332.21-notebook-win8-win7-64bit-international-whql.exe file name), said driver 19/12/2013 - quick installation, normal use date Nvidia installer.

  Both these installed just fine and work perfectly together at the moment.

  I hope that latest drivers will continue to install and work together as new drivers come out directly from Intel and Nvidia.

  I'm just happy that I finally have two of the latest possible stable drivers.

• VM Console goes black after installing NVIDIA drivers

  Hello

  I have the NVIDIA K2 maps in vSphere 6.  Once I installed the NVIDIA drivers on the virtual machine to Windows 7, I can no longer connect using the VM console in vSphere.  RDP is the workaround.  The NVIDIA Deployment Guide says that I have to change the settings and increase the memory in the virtual video card.  I tried 9 MB, 32 MB, and 128 MB.  None of them worked.  Any ideas what I can try next?  Thanks in advance.

  Yes, as stated, this behavior is expected.  My experience has been to install the following in order:

  Install the following in the order by using the console to generate gold VM

  (1) base OS

  2) VMware Tools, reboot

  (3) configure the network domain and other options according to your needs.

  3) VMware Agent, reboot

  (4) direct connection plugin VMware.  Shutdown VM

  (5) add a vGPU device, power on VM

  VC will display the IP address of the virtual machine, use View Client to connect directly to the IP address of the VM.

  (6) Windows meet the new device and prompt to reboot.  Given that the driver gets installed next step, click on no.

  (7) download and install the NVidia driver.  You can get disconnected, reconnect to the session.  Reset during the installation of the drivers NVidia shows

  8) reconnect via a direct connection, right click on the desktop and bring up the NVidia Control Panel.  Enter license needed (M60 only) information.

  (9) in NVidia Control Panel click on the adjustment of the Image settings with preview.  You should see a rotating logo of NVidia.

  (10) at this point, vGPU is configured and ready to install additional software and generate your snapshot for creating pools.