Create a new partition on Windows 7

Similar Questions

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• Setup could not create a new partition, new z510 non-OS and windows 7

  Hello, I have a huge problem with windows install. Clean all the partition using windows install to create two partitions: 100 GB and GB 890. When I try to install windows I see:

  Setup was unable to create a new partition or system to locate a system partition. See logs of installation for more information"

  

  I put:

  Configuration: Controller-> Compatible Sata Mode

  Start mode: Legacy Supprt

  Boot priority: first Legacy

  Need help, help me.

  SOLVED... I tried to install the USB drive... there couse a problem.

• My Windows partition is not bootable after creating a new partition

  Hi all.

  I use a Mac Air with El Captain 10.11.1

  My bootcamp with Windows 10 was running ok, today, I created a new partition to expand the windows partition.

  It was made in utiity Mac disc.

  After that windows no longer not bootable.

  Partition editing work on Mac OS and Windows.

  I have 3 partitions: Macintosh HD - Untitled - Windows.

  Here's the output of certain commands: (note that the windows partition is listed as disk 5)

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  MacBook Air-Ricardo: ~ Barbieri diskutil list $

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 38,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 22.3 Untitled GB disk0s4

  5: Microsoft data base systeme_windows 60.0 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 37,7 disk1

  Logical volume on disk0s2

  EF0DAAB2-0675-42BA-BBF0-503F6E586497

  Unencrypted

  MacBook Air-Ricardo: ~ list of cs Barbieri$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 7132A7B6-34BF-44BF-A9C5-FC171DA3D0F6

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 38080155648 B (38,1 GB)

  Free space: 18948096 B (18.9 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 38080155648 B (38,1 GB)

  |

  + -> 1B3FC191-1C21-4882-8F49-AE4A205EEB9D family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume EF0DAAB2-0675-42BA-BBF0-503F6E586497

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 37708886016 B (37.7 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  MacBook Air-Ricardo: ~ Barbieri$ sudo TPG w - r show/dev/disk0

  Password:

  TPG: illegal option--w

  use: TPG [-rv] [Pei nparts] control device [options]...

  MacBook Air-Ricardo: ~ Barbieri$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:07 0 0 0-0 0 0 [0-0] HPFS/QNX / TO THE

  04:07 0 0 0-0 0 0 [0-0] HPFS/QNX / TO THE

  Thanks in advance

  1. in what year is your MB Air?

  2 Please after the release of

  sudo dd if account = / dev/rdisk0s5 = 2 >/dev/null | hexdump - C

  3 Boot Camp: resize the Windows partition.

  WARNING: Do not use other applications or windows to resize your partitions. If you do, you could potentially harm your computer and prevent its commissioning.

• How to on windows 8.1 PRO create the new partition, save image system on it and restore it from this image

  HP pavilion model - 17-e054ca

  After upgrading to PRO 8.1 window I see
  C:\ 932 GB
  D:\ 28 GB-sized recovery

  I want to save system image backup
  Currently, to create the system image backup, I have only one option to create the image on the external drive or on D:\

  1 is it possible without having to reinstall windows create new partion E:\ in order of the system backup images that him?
  If yes how to create new partition in win.8.1?
  2. If the partion E:\ will contain system images can I boot from usb drive recovery and choose one of the system located on E:\ restoration images
  3. If for some reason I want to reinstall the operating system from the recovery set DVD (s) factory setting of what is going to happen with partion E:\
  4. What is-locations of D:\ marked as recovery?

  1 is it possible without having to reinstall windows create new partion E:\ in order of the system backup images that him? If yes how to create new partition in win.8.1?

  (1) YES. Please see Computers HP - partitioning and naming (Windows 8) readers for the instructions titled "create a new partition.

  2. If the partion E:\ will contain system images can I boot from usb drive recovery and choose one of the system located on E:\ restoration images

  (2) YES, provided that you mean a 'repair Windows USB drive '.

  3. If for some reason I want to reinstall the operating system from the recovery set DVD (s) factory setting of what is going to happen with partion E:\

  (3) If you "reinstall OS" a set of recovery discs HP or an HP Recovery USB Flash drive, partition 'E:\. "is erased as support for HP recovery returns the computer to a factory State. I suggest that you store your "Backup of System Image" windows on an external hard drive for best results.

  4. What is-locations of D:\ marked as recovery?

  (4) the purpose of the "D:\". "HP recovery partition is to create your recovery HP personal media, return the computer to a factory State and restore the originally installed drivers and software.

  If you have any other questions, feel free to ask.

   

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I can't install Windows 7. It is said that "the installation program was unable to create a new partition system or locate an existing partition of the system", when I chose I have hard drive and my C: / drive is not there!

  I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?

  I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!

  Hello

  I suggest you to see link below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-create-a-new-system-partition/92c682dc-A759-49b9-A235-e84d13db6a96

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/9e18e169-f77e-4026-B22F-f602e670d55c

  Hope this information is useful.

• Install Windows 7 on Dell laptop, error "Setup could not create a new partition system or locate an existing partition.

  I had Windows Vista ultimate on my Dell Studio laptop which consisted of 3 partitions (OS, recovery and OME).

  In order to complete a clean install, I deleted all partitions and create a new 1 and formatted it, but I am informed that the installation was unable to create a new partition system or locate an existing partition.

  I tried in IDE and ACHI, but neither enable Sir to go beyond that. I am booting from the CD with Windows 7.  If someone is able to help, they explain in layman's terms, as I am a relative novice.

  Thank you

  As the drive was provided by Dell, you need to talk with them.

  The disc could be waiting to see the things that you have deleted.

  It can also be a type of completely different facility than the normal installation of Microsoft discs.

  You would have more than likely been OK if you would leave the formatting alone and partitoning.

• Setup cannot create a new partition system or locate an existing system partition error on installing windows 7

  I am trying to install windows 7 on my emachines T6520 in with a single hard drive. so far, I can get to where it says select the partition. so I select the single partition it and it gives me this error "cannot create a new partition system or locate an install" ive tried EVERYTHING. I have only plugged in the USB is a MI to help install windows from. This time the boot priority is hard disk and then cd rom. ive google search for days and nothing helps. I have the windows installation disc, but whenever I boot from the disc it loads the configuration files and then right until he finishes it says "unexpected error" and I can reboot or turn off the computer, that's why im starting on a USB key. Ive also tried DBAN and no luck. Help, please!

  Hello

  I suggest you view and perform the steps from the following link to install Windows 7.

  Installation and reinstallation of Windows 7

  Always if you have any problems in installing Windows 7 perform the steps from the following link.

  Solving Windows installation problems

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• recovery system after creating a new partition

  Product number: A6Y43UAR #ABA

  Name: HP Pavilion g6-1d38dx Notebook PC

  OS: Windows 7 64-bit

  My hard drive is shipped with a factory setting of 4 primary partitions. I would like to remove one of the partitions in order to create a new primary partition using this guide (jump to option I content):

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-...

  My goal is to create a new partition D where I store all my data so that something happened to my operating system that is on the C drive (viruses, etc.), all my data will be safe in the drive D. I hope that running the system recovery HP (using the f11 key) will not remove the user created the D partition and the data in it , but that's where my confusion. The guide above says the following on this subject:

  "Remember that if you decide to use the recovery discs or the F11 option to restore the PC to its original state, all partitions that have been created by you will be lost and will also lose all data that was stored on them."

  
  However, another document which is the HP system recovery guide, says the following

  Your computer can have three types of available system recovery, or he might have only two. Use the type of recovery in order to solve your problem without making further changes as necessary.

  If you don't have 3 options in the recovery then Yes, System Recovery Manager will delete all partitions and restore the original configuration.

  To better protect your files an external USB hdd is a good investment of backup. You can also use it to make a System Image of your hard drive that can be used to restore windows and all software/drivers if you need to reinstall. 1 > guide 2 > guide

• Got erro 'We couldn't create a new partition.' installation Win 8 via bootcamp

  I was installing Windows 8 pro via bootcamp on an iMac with the new installation of recovery.

  It's my fusion drive before installing windows:

  

  However, I got the following error during the installation of Windows 8 pro via Bootcamp, even though I formatted disk 0 Partition 5 Bootcamp:

  We could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  

  So I have to quit Setup and go back to Mac OS X and delete the Windows via Bootcamp partition:

  

  

  Can I ask you why windows cannot be installed on this partition formatted? and how to fix this?

  (I just picked up the iMac to a disk fusion problem before installing recently: El Captian is not installed on the part SSD disk fusion after recovery of the internet)

  It's frustrating because I installed Windows 8 successfully via Bootcamp when I received the new iMac earlier.

  Advice and emergency aid are necessary!

  Thank you!

  When you say that you have formatted your Windows partition, you format you through installation of Windows (2nd screenshot)? To this screen that displays all partitions, you have chosen the one you want to install to and then click on Format for the Windows install process can format NTFS?

• After creating the new partition Boot Camp of fixation

  Hi, I tried to resize my Windows 10 bootcamp but changed my mind, when I deleted the empty partition without title and will reboot my computer to start with Windows, it does not appear (I pressed the option key alt is told by the way). So a way to solve this problem of boot camp after having created a new partition? I deleted this partition empty, just to let you know again.

  Thank you.

  Some screenshots of my disk utility (http://imgur.com/a/3dyle):

  

  

• Creates a new partition and now bootcamp is not recognized

  Hi, I hope someone can help me.  I saw the thread here (repair Boot Camp after having created the new partition), but I had a suite of wire trouble and my setup may be different.

  I have an iMac with boot camp and created a new partiiton.  Now my windows boot camp does not start.  I see it in system preferences > startup in startup option disk, but when I have if I get the message 'no bootable disk '.

  If I restart and hold down the option, I see that my mac to start drive and not the windows partition

  Here is my system info:

  Boot camp is disk0s5

  

  

  

  I would appreciate it so no guidance in getting my new bootable Bootcamp.

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

• Boot Camp said "we couldn't create a new partition or locate an existing one.

  I am trying to install Windows using Boot Camp 8.1, after having previously deleted my partition Windows 10 after getting into a loop Auto Repair. I get the following error after hitting the button "format" on the installation of Windows: "we could not create a new partition to locate an existing one. For more information, see the Setup logs files. »

  Look at the other pages, I'm noting I have seem to have more than the other disk partitions (although the disk utility says I have no partitioned disks). In the Windows Setup screen, the following things are displayed:

  Disk 0 Partition 3 primary MB 128.0 MB 0.0

  Drive system 1 Partition 1:EFI 200.0 MB 196,0 MB

  Disc 2 GB 412,1, 0.0 MB primary Partition 1

  Disc 1 3 MB 619,0 0.0 MB primary Partition

  Disc 1 4:BOOTCAMP 518,6 GB GB 518,5 Primary Partition

  Why it seems that I have so many partitions? Shows only utility, I have one disk (more Boot Camp one). This is let me install Windows 8.1? I used BootCamp when my computer is new, 2 years ago and had no problem at all. And I added some partitions since (to my knowledge).

  Any help would be greatly appreciated!

  What are drives 0 and 1? You have a Fusion drive?

• Do not create a new partition

  I installed window 7 HP on my lenovo g580 but I encountered some problems at the stage of creation of partition ~ I had 2 unassigned partition and at the same time to create the 'NEW' partition ~ but I got the message saying that "the window cannot be installed in this hard disk space. the selected disk is the maximum number of partition of this type"after I created a new partition which means I got this message when I tried to create another partition ~ what is this average n how to solve this problem?

  Just see it. Also, now make factory backup without bloatware.
  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-and-Z-series/creating-recovery-disks-manually-through-RT-S...