Create the virtual machine to the second virtual disk

Similar Questions

• Re-create a virtual disk (RAID 1) of two existing drives

  After several power outages, my server Dell PowerEdge T110 ii starts plu. The virtual disk (RAID 1) has disappeared, but the two physical disks are still visible and a State of readiness.

  Is it possible to create a virtual disk Raid1 of two existing disk which was composed the original virtual disk without losing any data?

  If this is not possible, is there a way to recover the data (image) and re - create a new virtual disk?

  I hope someone can help me.

  I don't think, because the process would have initialized the disc, which formats.

• Windows 2008 R2 server is not displayed the second hard disk

  Hello

  We have two windows 2008 R2 servers. In what we have, two hard drive and with 130GB storage capacity. But it displays only 130GB is available. Seems like the second hard disk not recognized.

  What can be done to clear this?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  You already have disk cleanup?

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

  The Atlantic tutorial has 2 parts:
  Step 1 to 11 is for the classic disk cleanup which will give you back some disc FEPs.
  Step 12 until the end (more), is to delete all except the most recent restore points. This will give bring you a ton of disk space.
  ATTENTION: Make sure that your computer works OK because you delete restore points.
  You have no past point to fall up to restore more new restore points are created.

• My first computer user when I created the second user... Help! :(

  Hello, I really ned a quick response... :/

  So I created a second user yestarday, so I had them 2, after some time I switched user and then turned my pc of. Later when I went to loggn in my user to fir trees, I couldn't, because it was just possible to loggn into second account... it does not show that there first user, I had...

  The second user that I created was a Director? would it be posible that my first user is deleted somehow? :((

  I don't know what's heppening, but I really need the other user, because its so much important things for me! :(

  But I still do not see him... It's like gone...:(quand j'ai voulu loggin àle premier utilisateur, il ne m'a donné choix trop choisi premier utilisateur ou en second lieu, c'est juste me demanda pasword à deuxième utilisateur j'ai créé:(()

  Please help me, I need a lot of treatment

  If I read your post correctly, I guess the account you were using was the original administrator account which can be renamed.  When you create a 2nd account, it is normal that Windows hide the original at this point administrator account.  Rename the user administrator does not rename the profile, so you will probably find your files in 'Administrator' in the folder c:\documents and settings\.  This may be the reason why your account is hidden.

  If this is the case, to log in to your original account, when you get to the opening of session "Welcome" with only the 2nd account, press Ctrl-Alt-Del twice.  This should bring up a login screen 'classic '.  Try typing your user name and password in the boxes and see if you can connect.

  If you can connect and want two accounts to display, you need to create another profile and transfer your files/data in this additional profile and leave the original hidden administrator account.  To do this, pretend that your hidden account profile is corrupt and follow one of the following procedures:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• creating a virtual disk of hybrid

  Dear Sir.

  I created a 1 TB virtual hard drive but there are sometimes deleted after that I restarted or shut down my system. Could you help me in creating a hybrid (VHD) virtual disk in the appropriate mechanism so that the data it will not be deleted.

  Check out this tutorial by Microsoft MVP: VHD - create in Windows 8

• Cannot create a virtual disk existing; problem with files hard?

  Yes... This is a recurring problem since mid-December, and we finally decided to rebuild our vCenter on another host server.  I went and did the things of the new Virtual Machine and has "custom", so that I can browse and recover files hard and * _1.vmdk of our SAN for discs.

  Now, this large all worked Friday.  I just today... and it doesn't work.  D: drive (* _1.vmdk) disappeared, and I can't either remote on the server.  I can't vSphere, nothing!

  Then... we rebuild, changing the name of the server that we just built _old after stopping.

  When I go to recover files hard again, they are changed...?  I can't explain it!  I've attached a screenshot of what I take everything.

  Now... there at - it a way to solve this problem?  And if not, is it possible to find the information that was in these folders to manage our environment?
  
  Help?

  What you're saying gives me a really bad feeling.

  Sorry about that, I really want to tell you something more encouraging, but...

  Assuming that the snapshot you posted shows the old vCenter server folder, you can see that there are no configuration (.vmx) file more. I can tell you with certainty if the virtual machine has been removed (you can check the tasks and events) or if for example a backup application attempted to do his work but because of the virtual disks had reused problem!

  If you still want to use the existing virtual disks, you must move them to the folder of the new virtual machine in order to avoid any confusion.

  André

• How to create a virtual disk thick

  I'm trying to create a thick virtual disk without success. (Do not understand format.)

  I'm using this syntax.

  vmkfstools - ch. 2048 m /vmfs/volumes/myVMFS/rh6.2.vmdk

  I get "error connecting to server https:/localhost/sdk/webservice" maybe etc...

  I suspect that the problem is a lack of understanding of what "myVMFS" is-, but no less - the baffeled.

  Any help very much appreciated. (New for this sort of thing.)

  Ken

  You'll want to add - server filename.vmdk

• Cannot create the emanagement recovery disks

  Hello, I have an acer aspire one d255 I want to reset to factory default. I never did an installation of a recovery particion before this thought I'd better create discs of backup just in case.

  I have found the directions to create the disks, but whenever I select 'create disc factory default "I get the following message.

  "

  Configuration of the hard drive is not set by default. Abandoned backup.

  The only hardware change I did via the MMC disk management, I declined the c drive and made a particion of data storage.

  What is causing me to not be able to make the discs?

  more importantly, I'm likely to encounter a problem to make the recovery disk reset, if she can't create discs?

  If you don't have all the data your new partition created yet, simply expand the disk partition hard back to the State of origin and create more complex recovery disks.

  Hope that helps, good luck

• Dashboard SSD 1.4.2 has no option to create the USB boot disk

  IM using the Dashboard SSD 1.4.2 and im wanting to clean up a Sandisk SSD Plus 120 GB SSD.

  However when I click on the page of disinfection, it does give me not an option to create the startup disk USB (despite what the documentation says)?

  Im running Windows Pro 64-bit 10, if that helps.

  Thanks much :))

  I installed the Dashboard of SSD 1.4.2 on some other PC with Windows 7 Enterprise 32-bit and 64-bit.

  and the option to create USB boot disk displays and works perfectly!

• Unable to create the 3rd recovery disk

  Hello
  I am
  get an error when you try
  to create the 3rd DVD+ R.when it check 2% who say the message "that we live."
  Recovery media errors
  creation. Please try again. »

  Pavilion dv6-6113tx
  number-LZ765PA
  Core i5 W7 home premium
  pls help
  Sohag

  Hello

  Here's another suggestion that may help.

  Start Notepad and let Windows load completely.  Hold down the Windows key and press R.  For the run box, type msconfig and press ENTER.  In the System Configuration window, click the Startup tab, uncheck the box next to each startup item and then click on apply to apply the change.  Restart the computer and see if you can now get 3 disc to burn and check - as I suggested earlier, if it creates all the other disks before starting the window System Configuration and re - allows objects of start - stop and try again.

  Kind regards

  DP - K

• How to create the usb flash disk to Reboot

  How to create the reboot usb flash drive. If I want to do a recovery or restart the usb flash drive how to

  Hello

  read the google links

  and make sure that your motherboard allows you to boot from USB

  http://www.Google.com/search?hl=en&source=HP&q=how+to+make+a+USB+flash+drive+bootable&AQ=1&AQI=G3G-c1g3&aql=&OQ=how+to+make+a+USB+flash+drive

  and if you talk about the recovery partition of computer manufacturers from the D: to a bootable flash drive, you can not do

• lost the second installation disk

  I lost my second installation for creative suite disc 5.5 master collection.

  I always have my serial number simply unable to complete the installation.

  How can I complete the installation without the second disc?

  The link provided in the previous answer will not lead you to the CS5.5 files.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

• Two spawning models to create the second page, possible?

  I don't know if this is possible, but based on a value on the first page, I want to be able to create a second page using two models.

  My script below creates just two additional pages. Any ideas please?

  var t = this.templates;

  var j = this.pageNum;

  This is my 3 models, depending on the value of the first page, second pick 2 of these models

  var T = t [0];

  var S = t [1];

  var R = t [2];

  If (this.getField ("P" + j + ".")) Background.Dropdown4 ") .value == 'Other') {}

  var XO = T.spawn (this.numPages, true, true);

  for (var i = 0; i < 0; i ++) T.spawn (this.numPages, true, true, XO);

  } else if (this.getField ("P" + j + ".")) Background.Dropdown4 ") .value == 'Colour') {}

  var XO = T.spawn (this.numPages, true, true);

  var XY = S.spawn (this.numPages, true, true);

  for (var i = 0; i < 0; i ++) T.spawn (this.numPages, true, true, XO);

  for (var i = 0; i < 0; i ++) S.spawn (this.numPages, true, true, XY);

  }

  this.pageNum ++;

  App.Alert ("a new page has been added")

  Your handsome George! That worked perfectly.

  Thank you very much

• create the second with WRT54GL wifi network?

  I have DSL with a Comtrend router/wifi (WIFI1).  I would like to connect the WRT54GL to the physical network and have it create a separate WiFi (WIFI2), so my laptop connects to WIFI2, transmitted on the LAN and the Internet.

  Cannot do this work - tried to configure the WRT to server DHCP, DHCP pass-through (for the comtrend), and the best I can do is connect to WIFI2 and have access to the LAN but not the Internet.

  In the end, I want to put an antenna with high gain on the WRT to send to a building about 400' away and do away with horrible WIFI comtrends, but I just can't at first base.  Can anyone help?

  Thank you

  You can configure this way: comtrend as main router with Wifi1 and active DHCP then connect with the disabled DHCP and Wifi2 Linksys wireless router. For example, if the IP address of the first router is 192.168.1.1, put the Linksys IP address to 192.168.1.2 and the two will be connected via the LAN - LAN or Ethernet to Ethernet. Visit this link and read the setup of LAN - LAN http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...

  . I also suggest that before you disable the DHCP server on the router Linksys you first define its wireless settings.

• I can't access my main database after you create the second database.

  I installed oracle server 11.2.0.1.0 on windows server 2008, the installer to create a database for me called "orcl", then I could connect with the database

  use System Manager, I created another user in this db called x... etc, then I created an another database called 'pure', using dbca (database configuration

  assistance), I put the password of user on the system (in pure db) is 'oracle', after the creation process, I was able to connect with this database

  using System/oracle but

  I tried to connect to the first db using System/Manager, that I could not, I get "name of user and password invalid connection refused."

  I tried conn system/manager@orcl, but I could not also...

  Help me please to connect with the first database.

  Thank you.

  C:\>set ORACLE_SID = orcl

  System/Manager C:\>sqlplus