Creating tabs setting Pro 2015 into securities work do not?

Similar Questions

• OfficeJet Pro 8600 Plus: I have a top loader of the OfficeJet Pro 8600 Plus page works do not?

  The top loader will feed is out of paper. He reconizes that he delivers here but it will not feed... making the noise, but do not feed. Can I do to fix? I cleaned the rollers with alcohol.

  Hey @HandymanConnect,

  Welcome to the Forums of HP's Support.

  I see that you are having problems with the document feeder in your Officejet Pro 8600 more e-all-in-one printer. I can help you with that.

  First, I will mention that the cleaning of the rollers with alcohol has the opposite effect you hope. As the rollers of the printer depends on rough grip on rollers, with alcohol will break the rollers and damage to the printer. Instead, HP recommends to use water to clean the rollers and other components inside the printer.

  That said, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve problems of choice with your document feeder.

  If after following the above, you are still not able to use the feeder, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Toshiba Satellite Pro L350 paved digital works do not

  Have a Toshiba Satellite Pro L350 the numloc stop working. Have a bios updated, try setting numloc in the keyboard of the screen, replaced keyboard. Still does not

  Any ideas?

  Hello

  Check their documentation online with the help of Toshiba, and ask in the forums about known issues.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You can also check with a real computer (one that makes its own internal service and not a leek and)
  Displays a Best Buy or other stores).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Samsung Ativ tab 3 power button doesn't work does not, the device always at 0% battery

  I write about a Samsung Ativ tab 3 I bought recently.

  The item was bought September 26, 13, model No. is XE300TZC-K01AE. The morning of October 3, 13, I noticed that the screen was frozen and not unlock when you press the power button. After pressing the Windows button under the screen, login screen came and I was able to connect to Windows. On the home page, noticed that the battery was at 0%, although there were about 45% of charge about 7 hours at least. I plugged in the charger, but the battery was drained down and power off the device. If the charger is plugged in, the blue light was not on and also the device wasn't turning on. The charger was kept connected up to 16:00, but the unit was still not turn on. After several calls and discussion with Samsung, the unit was sent to a service center for repair and the 10 - Oct.

  The device worked absolutely very well once again, until last night. Yet once again, the device froze and power button did not work and the Windows button has been used to unlock screen after several attempts. Battery was showing 0% despite his accusation of 78% 15 minutes previously. The connection of the charger, the battery was still at 0% but not more. Fortunately this time around the closed device not down, but after 3 hours of connection of the charger, battery is always 0%. I would like to know any suggestions to help solve this problem. I tried to restart the battery APC controller in Device Manager, but there was no improvement. I am also attaching the powercfg command results.

  

  Rgds,

  Remy

  two days later... the solution seems to be to simply keep going & not connected until the battery is empty (support of important things upwards at the same time). The fact that it took several days, I understand that the warning 'battery 0' is part of the dysfunction. During this time, you can sleep it w manually control 'turned off' in the bar of charms, ensuring not to turn it off (cos then you will not know if the battery is still empty) and turn it on the original key w.

  Once the battery is completely empty (no response from the original key, little blue light by power button / stop), you plug it in and it works.

  My guess is that explains what has happened before, when I (and others I read) he sent for repair. At the time where he got at the workshop had drained the battery, so they connected, found it worked, and he came back with a message like "you must have forgotten to load," the missing issue.

  Let's see: if it is something that happens after a few months, & it's easily solveable, it isn't so bad. As much as we can always use it in the meantime that the battery is empty.

  Wonder if regularly leave the battery can drain ever few months would avoid the phenomenon?

  Be interested to hear what others have found.

  Rivka

• Acrobat Pro V9 serial number works only not for installation

  I need to reinstall my Acrobat pro v.9 on my new PC, however the serial number from my account no longer works. How can I get a new or existing difficulty my serial number serial number, so I can reinstall the Acrobat Pro v9?

  Thank you

  JK

  Acrobat 9 is not compatible with Windows 10.

• HP Laserjet Pro M402dn: Pcl 5 works or not in hp m402dn?

  I bought this printer because in descriptions of languages, includes the pcl 5.

  Do not work installation CD drivers. I'm looking for a UPD pcl 5, and I see that's not available pcl 5 for this impression in the UPD.

  What can I do?

  Although the site says the printer hp M402 does not support the universal PCL5 driver, I tried changing the driver, and this is the solution.

  Install a universal PCL5 driver supplied in Windows 7 and this is the solution. Thanks for your replies.

• radians into degrees works does not like my calculator

  On my sin (52) graphing calculator = 0.7880107536 (sound on DEG)
  The same thing with my scientific computing I don't know why its not working
  When my they are on the wheel it shows exactly the same as labview shows

  but when I try to use labview degreased, it gives the wrong answer

  You're a 52 (radians!) power for the sine function, and converts the effect. That makes no sense at all!

  You must convert to radians before sine functions.

• Help! "Create links to other articles" doesn't work is not on the final application

  Hello everyone,

  I made an app for an independent group of the Spain, which is a very nice format for musicians (you know, like the booklet with lyrics), but now, when I have the Developer Edition App on my iPad, something is wrong.

  I have a clue about this app, and in it, I have a menu to go to the article titled "Remixes" within this article, I have several pages (one for each remix/artist). I use the command navto: / /... Everything goes well in the DPS, but not on the final application (developer). On the App, for example, the navto://remixes#2 command does not work! Then when I am clicking on the menu, I'm on the first page of the article still! It's a big problem because this app is designed that way

  Furthermore, I work under the 27 Viewer Version.
  

  Could someone help me with this?

  Thank you very much!
  

  Known issue. You will have to wait for a fix which I hope will come

  This week.

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

  My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

  Hello rad trp,.

  Thank you for using communities Support from Apple!

  From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

  I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  See you soon!

• No connection directly into Premiere Pro 2015.3

  Hi all use first pro for several years now and just upgraded to the latest 2015.3 update. Every thing seems to be good without any problems during the update until I had to do a color grading. To my surprise I found that there is no longer an option to send my first pro time line to rank speed with direct link. in fact it has no direct link option in the menu. to add that you can not open 2015,3 project files within the category of speed either. Is this just isolated to me or others with the same problems? If so have a fix is better than export my project working on color, then export again. I really like the integration of direct link and it's a pain with it.

  Alternatively one has original first pro 2015.2 downloads so I can I downgrade again.

  I tried installing creative cloud of first pro 2015 but it lacks a few features that I use every day such as optical flow under the menu speed

  any help welcome

  Thank you

  Hi ToolzVFX,

  You're not alone.

  This isn't a problem; It's normal. Direct link is no longer available in Premiere Pro 2015.3. If you have any comments, please share it here: feedback form

  Back to Premiere Pro 2015.2, please see this: FAQ: How can I reinstall the first Pro CC (9.2) 2015.2?

  Thank you

  Regalo

• Capture VHS in Premiere Pro 2015, choose the option to capture video and Audio, doesn´t work!

  I used the first Pro CS6 and Premiere Pro 2014 before capture VHS via a record JVC deck, but now, when I do the same process in Premiere Pro 2015, it captures only the video in the option Capture Video and Audio mode. The only way to capture VHS audio is her choose Audio separately, because in this mode, it works. But then I have to synchronize video and audio, and it is not the best option. I can´t find no reason or settings which differs before when it worked. Do you have any suggestions?

  I use Mac OS X 10.9.5.

  Hello! I found the solution. The novelty in first Pro 2015 is that you mark a video and an Audio track to drag the material captured in the Timeline! Now, it works fine.

• Premiere Pro 2015 will not open

  Hello

  I just upgraded to first Pro 2015 and when I open the app on my laptop, I get a window intro with new features, etc, and then nothing, no matter how long wait. I use a Macbook Pro (16 GB of RAM) and had no trouble with Premiere Pro 2014. Other versions of Adobe (Photoshop, Illustrator, After Effects) 2015 products work very well.

  Thank you

  Laura

  Hi Laura,

  If you close this window of new features, you will be able to see anything else than a black screen. There are a few other tabs (creation, put on the road, Tips & Techniques) on this window, you see them?

  

  You can click on the file menu to open or create projects after closing this window.

  Thank you

  Regalo

• MacBook pro 2015 Diode, heating problems

  Hello

  I just bought a MacBook pro 2015, one with 2.8 GHZ, 16 GB RAM and ITB Flash. [old just four days]

  The question being, the first day of the machine as well as the charger were burning Red hot when I loaded for the first time, in subsequent attempts, heating got sorted out by itself.

  Nevertheless, I had installed the temperature gauge in the machine, I look one only a few videos YouTube youtube and navigation.

  Once in every two hours a message like

  The led O GPU temperature is 106 degrees, closing applications.

  Once I click on the tool, the temperature is now reset to 30 ° C. It seems that the temperature of the Diode is to reach 106 degrees, some app is closed (no one knows the tabs I have open in Safari are works well) and then it resets.

  Is it really a problem with the thermal conductive paste or a faulty diode.

  I go to the Apple store this Saturday? Can I return the laptop and request a new or a full refund.

  Can someone please advice?

  If you bought Apple with the last 14 days, you can return it for a full refund.

  http://store.Apple.com/us/help/returns_refund
  Then you can buy a new one.

  What about Apple and they can exchange it without having to go the way of reimbursement.

• Creative Suite CS5 - HAVE blocks with El Capitan on Macbook Pro 2015

  Hello

  I recently "upgraded" from 2006, one to a Macbook Pro 2015. Illustrator Creative Suite CS5, I bought years ago continues to crash when I try to save files, among others. I have read several forums and still do not have an effective solution. I tired: install Java 2015-001, uninstalled, and reinstalled the Creative Suite, renamed the file manager services with '.bak' and nothing works. I'm a graphic designer with the big upcoming deadlines and need of emergency assistance. Please advise! Thank you. Creative Suites Illustrator Download, installation, setting up

  If El Capitan Mac (or the new operating system of Sierra) read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  But... If you have an old program, it is only certified to run with an old operating system