Crush: Settings of the camcorder... work?

Similar Questions

• Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

  Adobe Premiere Elements doesn't recognize my camcorder - Canon GL-2.  Can I make it work?  The device worked very well with my old computer (just died) and an older version of Premiere Pro. Any suggestions?

  Version 13 capture is more than one camera to tape

  http://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• TB c. 24.0: changed ISP. ~ new email in the settings of the server & Server outgoing & all address books and Contacts; TB still shows the old email ID for Fwd & Rply

  TB c. 24.0, Win 7 Pro. Change of ISP. I use Outlook 2007; woman uses TB, same box. TB change username & email address in the settings of the server & outgoing server & default value. E-mail address changed in all address books and Contact lists. Now the TB still shows the old Correo electronico in < from > when reply or forward. It's confusing beneficiaries, who have sent their responses on a now non-existent account offshore. Check the Contacts Windows - empty. Check my Outlook 2007 - all Contacts changed appropriately. How do I kill this old TB e-mail address when it is not yet listed more - except when we try to reply or forward?

  Thank you! I don't remember the old data (ports, password, etc.) to re-create the old account to my wife several months ago and with a different ISP - I had written all this down, but it was destroyed in a fire at home - but you put me on the right track. I created a new account (sub?) via file > new > account existing with new information, verified mail he was working and then deleted the new subaccount. Now that works. Duh.
  This one goes in the file "fixes weird!

• reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went

  reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went bar & customize window title bar changed...

  By default Firefox will be "reduced to adjust." You who can disable in layout in a regular window or in print preview, but it's hard to call Preview in the window pop up in print, because the menu bar and the toolbar are removed. If it is a common problem, you can use a different add-on (!) which puts the print preview before printing and Page Setup on the shortcut menu.

  I have not used for some time, but I hope that it always works in Firefox 29: https://addons.mozilla.org/firefox/addon/printprint-preview/

• NB100 - what are the settings in the displays and graphics

  I decided to try to plug my monitor for my NB100 and messed up the settings on the page of graphics and screens. This seems to have had an effect on the last screen of boot of Ubuntu and the Netbook Office, which now runs very slow! The classic Office seems to work very well.

  Could you get it someone please let me know all of their parameters in the Applications-> other-> dialog graphics and screens.

  Also, I will have no joy, what makes a recovery from USB. I made a .iso on the recovery disc and put it on the NB100 HD. When I run unetbootin it runs a few seconds and does not all the files on the USB key. Any ideas anyone?

  Mike Merci for the link. :)

• Do I restore laptop to factory settings after the plague of virus?

  Invaded by virus quarantined files because they cannot be deleted. "System Restore" is not working now.
  Can I restore laptop to factory again?

  Of course you can do it. Please use recovery media delivered. On this way the unit will be to new factory settings. The installation is very simple.

  Good luck!

• My video is black, as is the input signal, the camera works like the other party can see my photo

  Skype video calling on my video and entering video as black rectangles

  Checked with a one off Youcam program and get a black square too, but the camera works like video caller can see my fine picture.

  Guess that's a direct x issue, made an update of windows, no wizz kids help out me

  Area right but bad parameter, I finsihed changes the tab video, video two and changed its basic color to substitute application settings has been swicthed on and I have swicthed he took. Now works OK

• Do I need two drivers Synaptics & ALPS to get the touchpad working?

  It Somethere I read for touch pad works perfectly it must be instaled Synaptics (the one I need for mine) and the ALPS.

  I was curios that is false information or it works?

  Hi mate ;)

  In my opinion, you should install always two drivers.

  More information, driver page Toshiba said:

  Jagoda86 _Alps - this driver allows you to set the properties and functions of mouse control.
  _Synaptics_ - this driver allows you to set the properties and the touch pad control functions.

  I assume that you need two drivers for all functions, which can be changed in the settings of the touchpad.

  If you want you can try to install only one of the two pilots, and then to verify that the settings are not available or that lack exactly.

  See you soon

• Get a spinning loading icon after I closed my iphone5, no reason for this? It lasts about 5 seconds. Other than the phone works normally.

  Whenever I closed my phone after about 3 seconds, I get a spinning loading icon on black background before his disappearance. Apart from that, the phone works fine. In my settings, it shows that a new software update is available, but since my connection is slow I decided to not updated for a while. Is something worrying?

  This spinning wheel on black background off is normal. Will occur if there is a software update.

• Equium A110-233 stops using the WiFi and the fans work only 3 sec

  I bought an A110 - 233 20/09/06. It works very well for about 1 hour then it interrupts the communication via the wireless network connection status States he is always connected, sometimes but not always the configuration window indicates that the without wire is cut and I should turn it on at the bottom of the window (there is lit) processor Intel Pro.

  I brought the world PC waiting for a replacement but I had to sit for an hour trying to reproduce the error, we couldn't go wrong but I have discovered that it does only when running on the network.

  Cooling fan only works for 1-3 seconds at a time, is it possible to increase this number.

  Any help would be appreciated
  Bob

  Hello

  If you want to change the properties of cooling module you must do in the standby power settings.
  You should know that the energy saver uses different modes of consumption. The laptop is using another mode of energy if the AC adapter is plugged and another mode of power if the laptop works only with the battery.
  On the basis of energy saver menu, you will be able to change the method of cooling. This option controls the fan.

  It is not easy to solve the problem of WLAN communication. I mean that there is no general solution. Additional it is not easy to solve because the issue doesn't happen always, but sometimes only. Perhaps the intensity of the signal is sometimes lower and therefore, the configuration software WLan Intel reports that the wireless network is turned off.

  In addition, you should also check the Wlan card properties. You will find that the properties in Device Manager-> right click on the wireless network card.
  Here, you must select the Advanced tab.
  You should find a few interesting options such as energy saving (disable) or the strength of the signal (enable).

  In addition, you can try to update the WLan driver. Maybe a new version is available.

  By the way: you should also know that some 3rd party application could have a bad influence on WLan communication.

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.

• HP pavilion 23-q012 all-in-one: can not import video from the camcorder to a lask of firewall do imput port

  I can't import video camcorder do a lask of the firewall port imput. Reserched replacement cable IEEE 1394 with a USB one and found it won't work for video. I tried a dvc 100, but the video editing progrm isn't pinnicle. How can I load the video into the computer, or can I charge my current camera videos? He uses the digital band map memeory for photos only.

  You kind of mutilated the terms, but if the camcorder needs a firewire IEEE 1394, your PC cable card cannot accommodate a.  There may be some devices that claim to USB conversions, but normally, they will not work with a camcorder.  It seems that another PC is going to be necessary or another camera.

• Ability to remotely change the settings of the BIOS on the Thinclients T610?

  Hi all!

  We use thin clients HP t610 for digital signage and we have deployed more than 40 years in the field. They seem to work just fine for our needs.

  After a few failures caused by construction crews an i've had phyiscally visit each sign to reactivate them. Since then we have deployed the t610s with the ' after the loss of power = on "setting in the BIOS. This seems to fix the problem and they light up immediately once the power is restored. Now that we have solved our problem, I would like to change the client deployment light setting as well.

  Is there a way I can change the settings of the BIOS on the t610 remotely? Or do I have to visit each change them manually and the machine with a keyboard? Some are installed in small spaces which are no easy access to remotely change would be better.

  Thanks for your help!

  Depending on what OS you have on the t610 you can download BIOS utilities for this on the HP website: http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&cc=us&lang=en&lang=en&sp4ts.oid=5226817&ac.admitted=1404312731554.876444892.492883150

  There is an included cmd line tool that captures the BIOS settings that you can edit in a text file and deploy it to other units remotely via HP device for example Manager.

• Cloning of the network settings on the printer - Smart zero 4.4 clients using Xen

  I ran into an issue trying to implement for thin client network printers Smart zero with the build Z6X44017 (same question for with prior build 4.3; same question for T520s, T610s, T620s): If the printer is set by the 'user' account in the HP printer Mapping utility, it does not pass by in a published desktop, XenApp as a printer available to all.  When changing the account 'user' to the 'administrator' account, the printer is listed in the printer mapping GUI.  But it is not available on the published desktop.

  However, if the printer is CREATED or MODIFIED by the administrator via the GUI HP printer Mapping on the Xen login Panel, then it is displayed as the default printer on the published desktop.

  As we seek to implement dozens of devices at once with the same network printer queue defined, it would be useful to set up once and then clone the settings.

  Here's what I've done so far:

  1 use the GUI HP printer Mapping utility to create (in administrator mode) network print queue and check that it works on the published desktop

  2. use HPDM to capture the root > printer-mapping-Bishop and root > registry values printers from that device using a task of 'files and records.

  3. apply these registry via the job template settings to the target group of devices.

  It works very well with regard to obtaining the printer to display in the GUI of the mapping of the printers on the Xen login Panel.  However, the same problem exists: unless I go again in administrator mode in the GUI and the Edit/save the printer, it is not available on the published desktop.

  A possible solution might be to run a job to 'validate' the printer settings via a program that could be run from the command line, but I can't find such a program in the file system for the Linux client.  It's just a bug in the configuration of the printer, or a limitation of this printer MUST be configured via the GUI only?

  

  The local HP sales engineer for thin clients was able to track down the command of "committing" the printer settings after running the registry task to copy the settings.  It is run as a task of type Script as a template file and registry.

  Here is the command to run in the script:

  /usr/share/Manticore/plugins/printer-mapping-Mgr/wrappers/apply.sh "root/printer-mapping-mgr.

  It can be added as the second subtask under the task of file & registry.

  The complete solution is:

  1 use the GUI HP printer Mapping utility to create (in administrator mode) network print queue and check that it works on the published desktop

  2. use HPDM to capture the root > printer-mapping-Bishop and root > registry values printers from that device by using a "file and registry" tasks and save it as a template

  3 edit the template to add a second sub-task of Script to run the command ' root/printer-mapping-mgr ' /usr/share/manticore/plugins/printer-mapping-mgr/wrappers/apply.sh

  4. run the task of file & registry model against the target devices.  This model will then apply these registry settings for the group target devices and run the script to validate the changes on the target devices.

• Reset factory settings but the recovery disc is not recognized

  I have a HP Pavilion dv6-3030sd laptop with Windows 7 Home Premium installed OA.

  I want to restore it to factory settings, but is not possible using Recovery Manager, because he does not see my recovery Partition.

  Since I have recovery discs, I tried to restore my factory settings using the recovery discs.

  However, it is also not possible. Even after setting my BIOS (boot order first DVD player) the laptop not start using the DVD player.

  Then performed several actions (eventally I still adjusted registry) as mentioned by microsoft: http://support.microsoft.com/kb/314060/en-us?

  Still not possible to start using a DVD player.

  It goes the same for USB.

  I can use my DVD player and USB but I can't boot from them.

  How do I restore my laptop to factory settings?

  I still have my product key and I was able to record an English version of Windows 7 Home Premium x 64 as an image on a DVD.

  What can I do?

  Is it possible to mount it on my virtual DVD drive (BD - ROM drive) (so the picture of windows 7 in the virtual DVD drive and then install it?)

  I hope that there is someone out there who is able to help me!

  Hello

  Sometimes just set the boot priority in the bios menu does not work as it should.

  Try the following.

  Insert your 1st recovery disk, and then click stop the laptop.

  Now on TAP the ESC key as soon as you start the launch of the laptop Boot Menu.

  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Kind regards

  DP - K