D10 bios, no ahci option?

Similar Questions

• AHCI option is not available in the bios

  HP Pavilion Slimline S5320UK

  Window 7 64 bit

  Installed new Samsung SSD 830 128 GB

  I tried to install msahci using regedit and reboot - but still no AHCI option in bios setting

  I don't think.

  The problem is with the BIOS/chipset

  Unless the PCI controller has its own BIOS where you can set it to AHCI, so no, it wouldn't make any difference on what you have now.

• HP Compaq dc5750 Small-FF No. AHCI Option in BIOS

  I work for an organization that have a good number (400 +) this PC model in use. We have problems of slow hard disk access. All documentation and the forums I can find online speak AHCI is an option in the CMOS settings and I would like to try this, but all of our dc5750s have no option - they have only Legacy IDE, Native IDE (currently we use) and RAID. The connections to the MoBo are physically SATA.

  I am aware that we must provide the operating system with SATA drivers to perform the boot (since using XP), and we did it with success on other models of PC, but this isn't the issue. I'm interested to know why the AHCI option is not available in the BIOS when anyone with this model seems to report here.

  I updated the BIOS to the latest v2.35.

  Thank you very much.

  Hello:

  I have provided the link for the BIOS dc5750 configuration guide.

  There is no option of DCIS. Default value is Native IDE if you're not in the RAID configuration. The setting of DCIS came out in models that have made this series.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c00765938/c00765938.PDF

  There is a management setting of SATA power that enables or disables the SATA bus or device power management.

  I don't know what the default setting should be for that.

  My suggestion is to upgrade the BIOS to its default values.

  Paul

• No SATA in BIOS on Z60t option

  I wonder if anyone can help. I want to install an SSD on my Thinkpad Z60T, so I need to be able to switch to AHCI mode.

  However, there is no "Serial - ATA" option in the BIOS. It should be in the Config, but SATA configuration is not listed. I am running the latest BIOS for the computer laptop (1.24). Someone at - it ideas?

  The Z60 - series is based on T43/R52, which both also have a SATA controller but also a SATA IDE bridge.

  The BIOS so don't have AHCI option.

  

• Dell Inspiron 620/Vostro 260 NO Bios for AHCI

  Dell Inspiron 620/Vostro 260 NO Bios for AHCI

  Interestingly, I couldn't even update the bios without the INTEL drivers.

  Check in the Device Manager, the machine uses the ATA drivers not AHCI drivers

  AND will not install the INTEL RST drivers.

  Why is this?

  

  I tried to upgrade to the version of the Bios A04, but this made no difference.

  

  I did some research and discovered that the chipset in this system, the H61, simply does not support AHCI or RAID. There is no way to activate for a reason. :(

  Wish I had known this. The value of this system really went down the tube if you intend to launch an SSD in there.

• No AHCI in the BIOS pavilion g6 option

  I was wondering if AHCI was enabled by default, because there is no option to enable/disable in the BIOS. My laptop is a hp pavilion 1d46x with BIOS F.46 g6.

  Thank you

  Oliver

  Hi, Oliver:

  Yes, AHCI is defined by default in most, if not all, of recent years HP consumer notebooks.

  You will find only the possibility of changing the mode of SATA device on HP business laptops.

  Paul

• Pavilion 500-164: bios update - no option to update

  Fan CPU and PC failure would not start unless the message "Fan failure. Fan has been replaced, but now always make mistake on blue screen BSOD, which reads "WHEA_UNCORRECTABLE_ERROR" and sometimes other errors. Windows tries to start in recovery but BSOD over and over again.

  What I tried:

  (1) reset BIOS default. DONE - behavior even after resetting to BIOS defaults.

  (2) I tried booting from USB drives (several) using the tools of recovery of Linux (Ubuntu Live, Kaspersky, etc.). KERNEL PANIC, etc..

  (3) downloaded BIOS update HP and created update BIOS USB. Restarted with USB (I turned off safe boot, etc. to allow booting USB.) - NOTHING. I tried the two BIOS to run untouched and by going into the BIOS options (by pressing ESC @ boot upward) - none of the options anywhere to read/set the BIOS updated.

  According to a doc Support HP, I tried updating the BIOS of w / in "HP PC Hardware Diagnostics UEFI. The version on this PC is 5.2.2.0 version: I see no option to update UEFI (Flash BIOS). Options like suites: information system, system, testing of components, Test Logs, language Tests, exit.

  What I'm trying next, please?

  BIOS: JA2 v80.35

  CPU: AMD A8-6500

  RAM: 8 GB memory DDR3, DIMM single into the Groove 4.

  NOTE: The system came w / RAM into the Groove 4. Only POST is it RAM DIMM in the location #1. Is this normal?

  Thanks for nothing, Support HP...

• HP MIni 110 - Bios has no option of disk hard sata/IDE

  Hello

  My HP Mini (Win xp home ELCPC HP) can not load in windows because there missing files during startup. So I decided to repair the windows.

  However, I have some problems to load WIn XP Home CD SP2 (not ELCPC HP) at the start. I used closure of IDE - USB hard disk by replacing with CD-ROM instead of hard disk because HP Mini has no optical drive

  The CD has been loaded, but when halfway incoming to the windows installation, I got the BSOD after F6, pilots and BSOD loading to the 'Setup starts windows..".

  The error message was something like this:

  "Search for viruses on your computer. Remove any newly installed hard disk or hard disk controllers. Check hard drive are correctly installed and configured. Use CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  "Stop: 0x0000007B (0xF7A22524, 0 x 0000034, 0x00000000, 0x00000000)"

  I browsed the site and found this recommendation to change from SATA HDD to IDE in BIOS. Strange thing is that I don't see this option in the BIOS. There is nothing a lot of option in the bios. I could only change the boot sequence, tool running, put in place under tension the password. That's all.

  No idea how to change the SATA to IDE hard drive in HP Mini 110? I would really appreciate your suggestion.

  I tried to restore but F11 / F10 takes me nowhere. Nothing happen after pressing these buttons. I wonder why the factory never create a copy for me restore my system if windows problem. I bought Win XP Home and Office, but no backup copy of the preload is created for the user when he is out of the factory. However, I am a little disappointed.

  In any case, would like to hear from any of you on the issues.

  See you soon!

  Have you tried the F6 key to go to Roxio BackOn Track to retrieve?

   

  http://support.HP.com/us-en/document/c01805426

• In the BIOS boot device options

  Hello

  I want to use my USB to be bootable since my laptop Winxdows XP.  When I go to the BIOS to change the settings,

  the Boot Options available are:

  Startup CD-ROM (ENABLE)

  Boot disk (ENABLE)

  (DISABLE) internal network card boot

  BOOT ORDER

  USB disk on key

  USB floppy drive

  CD-ROM ATAPI CD/DVD drive

  Portable hard drive

  USB hard drive

  Network card

  Please indicate which of these Boot Options should I 'ACTIVATE' and

  that the boot ORDER should I choose to be at the top: -.

  1. If I want to boot from my USB key USB

  2. If I want to boot my Portable external hard drive

  3. If I want to boot from my CD/DVD Rom

  4. If I want to boot from my laptop

  The "boot" of Word to say 'start' in language computer, right?

  So if I chose to boot from my USB key, my laptop cannot start to load Windows XP because it normal would be more until I go back to the BIOS to change the setting?

  Why cannot it not auto answer to the user's choice to start the Windows?

  BTW, what does "Starting the internal network card" means?

  Please notify.

  Thank you

  glemel

  To see if you can boot from a USB key, you must go into your BIOS and look at the boot order.  If you see "USB stick" in the list, then you can probably - but it should be placed in the order before the drive hard to make it work.

  If you want a boot disc/USB drive for repair purposes, I highly recommend the free Hirens Boot CD.  This CD comes with a bunch of diagnosis and repair integrated tools.  If you can't fix it with this CD, it cannot be fixed without having to reinstall Windows.  Of course, this is not Microsoft.

  Download Hirens: <> http://www.hirensbootcd.org/download/ >
  Don't be fooled by the fake download links.  The correct link is a file .zip downstairs in a light green rectangle with a drive icon.

  There are instructions to create a Bootable CD and bootable USB Thumbdrive:
  Hirens CD Burn: <> http://www.hirensbootcd.org/burning/ >
  Hirens USB Flashdrive Burn: <> http://www.hirensbootcd.org/usb-booting/ >

  HTH,
  JW

• S3-391 bios - few modifiable options

  When I arrived the S3 Ultrabook last year, I was able to enter the parameters of the bios and make changes. More precisely to device boot order and set/clear bios passwords. Have a bios password that was rarely used easily lost. I managed to clear the bios password according to the Guide of Service Aspire S3 MS2346.

  I can now access again the bios settings. However, it only will allow me to set the time and Date, and a HD password. All other options are disabled, including the ability to use F12 to select a startup disk. My OS is pretty messed up right now so I need boot from a USB key and reinstall.

  My bios version is 1.15. The 1.29 upgrade is possible, but only after I have a working operating system.

  So is it possible to reactivate the bios options to change? Specificially, enable F12 boot drive selection?

  Any help is greatly appreciated.

  Thank you

  [link removed to offer third party manual stolen from maintenance site]

  That's all what I am able to offer.  I see no reason why a BIOS normally flashed would expose these issues.

  We suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support

• Disable BIOS memory caching options or shading

  HI - please help me!

  I have HP compaq Presario (windows xp)

  A blue screen appeared with the message today... for example disable or remove software - disable memory BIOS options such as implementing caching or shading

  error codes 0 X 00000043, 0XDFDA000, 0X000000C2

  I can't do anything because computer ELE will start not other than the basic options (I think that F8)

  What can I do?

  Thank you

  Ashana, repeat the process and choose DETRUCTIVE RECOVERY steps 5 or 7 that your running recovery.

  If your use of the recovery partition, it will be step 5

  If you use the discs it will be step 7

  http://support.HP.com/us-en/document/bph07145

  PS You can get more help by starting your own thread.

  Message edited by dmhoo29 on 02/26/2009 10:13

• E520 - new bios with graphical option - graphics card with opengl

  Hello, I get purchased a Lenovo ThinkPad with HD 6630 M. For users, who have E420 there is a new option from bios with option of discrete graphics in the bios, but for E520 support is always this option missing. Latest version of the bios is since August and my new laptop have bios 1.17, which is not yet on the web site. My question is, if lenovo release the new version of bios to fix this? If there is a solution for type E420, which is the same that E520 except the size of the screen, so day how spent us waiting for it?

  @LorD_OniX,.

  Check here-> http://forum.lenovo.com/t5/ThinkPad-Edge/E420s-switchable-graphics-with-opengl/m-p/570451#M5811

• HP 350 G1 - create a usb bootable BIOS - all the options disabled

  Dear useful people,

  I want to update the BIOS on freshly bought G1 350 HP notebook from F.11 to F.12 - who has not only installed FeeDOS. That's why (on my Lenovo), I downloaded http://ftp.hp.com/pub/softpaq/sp66501-67000/sp66979.exe, HP Notebook System BIOS update, to create the bootable USB key for updating the BIOS. Now, after spending the first steps and make choices that exactly, I want to do, I get all the options disabled.

  

  After a few hours of trying different things, all ports 4 USB (2 x 3.0 and 2 x 2.0), 3 different USB key I gave up and turned to you

  Why I want to update BIOS: install Windows 7, because now he stops at a point of this CD/DVD drive driver is not found and must search for it. On windows, it was written that the BIOS update can help.

  Good luck.

  Try to burn a DVD too...

  I get my files ISO W7 from here... SP1 Refresh media.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

• S12 - Nvidia - update the BIOS, Hyper Threading option

  Hello, any chance to see BIOS to enable - disable the Hyper Threading, s12 ion, other functional improvement options?

  Even on the possible s9 off HT in the bios...

  BIOS is the only way to enable or disable hyper threading.but do not hesitate to try this.

  http://www.Intel.com/support/processors/Pentium4/sb/CS-017371.htm#a

  Sorry, at this point, you have to wait for the update of the bios.

  (marking this thread as resolved)

• D10 BIOS AND O/S SHOWING ONLY HALF THE RAM INSTALLED

  Computor was purchased with 8 1gig chips installed. The bios and the operating system report 4 GB.

  When I remove the ram in slot 2, 4, 6 and 8, the bios and the o/s report 2 gig.

  I have cleared the cmos memory and reinstall the RAM chips.

  Although the seller insists on the memory chips live are all good, I think that my next step would be to draw all and reinstall them one by one. What is the best way to do this, start with slot 1 and 3 and then add one piece at a time and restart?

  The problem has been resolved. It turns out that the RAM chips come from different manufacturers. 6 microns and 2 Samsung. All the chips worked well within the brand but do not work well together, I guess with some timing differences. I got all installed Samsung and all 8 concerts now appear.