Data Guard can apply to a single schema
We want to test the Data Guard feature to our customer. While with space limited in the catchment area, management wants to apply Data Guard for an instand little test of the entire database schema. I don't think it is possible newspaper archive sent and applied to the wait, those redo entries involving that another data schema will cause the error.Just want to confirm that my thinking is correct.
Hello
You are right, it is not possible to have dataguard for unique schema, you can use it to any database.
Outside the trial, if you want to have the replication of a set of tables or diagrams instead of the whole base then you can use golden gate for that.
I will recommend you to create a new DB test and test dataguard on it.
Tags: Database
Similar Questions
-
Can a weird question we use Data Guard to apply the bidirectional log?
Hi I have a question about Data Guard, can we use Data Guard to apply the bidirectional log? I mean keeping the two of them primary and standby to Active status (read write Mode).
Maybe my question seems silly, but I just wanted to check on it.
Thank youLaughing out loud
That Golden Gate or water courses that will work in two ways. One or the other. Puts additional requirements on the hardware is the downside.
Data Guard does not do that.
-
Data Guard Performance: apply Lag
In Cloud control there is a measure called "Lag (seconds) apply" under a group called 'Data Guard Performance '. I created an alert on this metric rule. However, I want to know what thresholds are defined for this measure, if I look under the supervision of models. He isn't here. There are also a number of other Performance measures of custody of data that is, I can't find or add in templates. Can anyone help?
From the home page of a database on hold, you can navigate to the (Oracle database > surveillance >) metrics and Collection settings page and select all the metrics view to check or set thresholds for (Data Guard Performance) metrics apply Lag. Note that by default, no limit is set for this measure.
Kind regards
-Loc
-
Create a user can access a single schema - please help!
Hi all
I want to create a user in an Oracle database that can only access a single schema. I did the following:
CREATE THE USER 'TEST' PROFILE 'DEFAULT.
IDENTIFIED BY 'test' TABLESPACE DEFAULT 'USERS '.
TEMPORARY TABLESPACE "TEMP".
RELEASE OF ACCOUNT;
GRANT SELECT ON "TESTDTA". "" F0007 ' TO 'TEST '.
GRANT 'CONNECT' TO THE 'TEST ';
I did a test and the TEST user can access all schemas, when I only gave the explicit permissions for the TESTDTA schema.
Any suggestion/precision?
Thanks in advance.
Victor.Maybe worth looking at what has been given to t PUBLIC:
Select * from dba_sys_privs
where dealer = "PUBLIC";Select * from dba_role_privs
where dealer = "PUBLIC";Select * from dba_tab_privs
where dealer = 'PUBLIC '.
and the owner = "PRODDTA";A.
-
How to move from Data Guard time really apply (restore) to archive the journal
Hello
Standby database configured with broker and application really remake in time; However, I want to change it to archive the journal apply mode without losing the broker configuration. Is this possible? If it is not possible to use the broker to make archive log apply, I can remove the broker and use Data Guard to set up the day before to use the archive log apply?
ConcerningHello;
Broker automatically allows real-time applies to databases on hold if the standby database has standby redo logs configured.
Stop repeat applies
DGMGRL> EDIT DATABASE 'PRIMARY' SET STATE='APPLY-OFF';
Repeat restart applies broker
DGMGRL> EDIT DATABASE 'PRIMARY' SET STATE='APPLY-ON';
In order to get rid of standby redo logs would be a way. I would like to leave myself alone. Real time assistance to prevent the loss of data.
Best regards
mseberg
-
Archiving logs apply frequency in Data Guard
Dear all,
How can we verify/set up the frequency archive newspapers should be applied to the Data Guard?
Version: 10 g 2; OS: Windows 2003 R2 (64-bit).How we can configure the frequency of archive logs must be applied to the DG?
Erase the question once more what you're expecing, as I understand, it's...
It depends on the Redo genearation / Archive primary & network latency between primary databases & Eve.
There is a configuration, you can change in the primary to put options such as delay , net_timeout and so on.consult this manual too.
http://download.Oracle.com/docs/CD/B28359_01/server.111/b28294/log_arch_dest_param.htm -
Can we apply a createInsert single button for the two master form, details of Table?
Mr President.
Can we apply a createInsert single button for the two master form, details of Table?
I want to just click a button and fields are available in form-Master and details-table.
As below
Concerning
Mr President.
My worm jdev is 12 c
And I can do your job for you.
His code
For any organization that wants to do this job
public void createVoucherAndVDetailsRow(){ VoucherViewImpl voucherVO=this.getVoucherView1(); VoucherViewRowImpl row=(VoucherViewRowImpl)voucherVO.createRow(); voucherVO.insertRow(row); RowIterator iterator= row.getVoucherdetView(); String voucherNumber=row.getVoucherId(); NameValuePairs nvps=new NameValuePairs(); nvps.setAttribute("VoucherId", voucherNumber); VoucherdetViewRowImpl voucherdetRow=(VoucherdetViewRowImpl)iterator.createAndInitRow(nvps); iterator.insertRow(voucherdetRow); }
Concerning
-
Could someone advise me where I can download Data Guard of?
Could someone advise me where I can download Data Guard of for database 11g? I do not see under edelivery.oracle.com if I'm missing something...
Thank you.
Data hold is not something configuration which can be downloaded from the delivery or oracle support.
Check the document below oracle concepts
-
Captivate in 8, can you apply an effect (for example, a transition) for the grouped shapes? (I can apply the effect to a single shape, but when I group forms, I can't understand how).
Hello
It is not possible to apply effects to groups of forms. You can apply the transition from the distribution panel and other properties in the property inspector.
You will need to apply the same effect of the same duration for all objects in a group in this case.
Thank you.
-
Repeat applies without using Data Guard
Hello everyone,
I would like to redo apply to a database of pending. Unfortunately, the DB's standard edition for Data Guard is not an option. Is there documentation on how to achieve something like the roll forward apply without using Data Guard?
Kind regards
FrankThere are a lot of threads on this same forum on this specific topic.
Please use the search (top right of page), and see the list of threads returned:
https://forums.Oracle.com/forums/search.jspa?threadID=&q=%2Bstandby+%2Bstandard+%2Bedition&objid=F61&DateRange=all&userid=&NumResults=15Nicolas.
-
Protection Mode change Data Guard.
Experts,
Ask your entries on the Data Guard protection mode change, below, is our environment:
BECAUSE with two nodes: primary
Single stand-alone Server DB: Eve
Apply real-time: enabled
For the primary and Standby databases, it's protection guard data display "Maximum Performance" mode. According to our needs, we would go for "maximum availability". I can go ahead and change, however I have questions in mind before making the change.
1. do I need to change the protection on both primary & standby mode?
2. do on DB primary change automatically the standby mode too?
3. If the answer is NO to the 2nd question, I need to change the mode of protection to standby also? In the otherwise, primary and Standby will be run in two different modes.
Please let us know of your entries.
Thank youCrazy.
I'm really happy that it works. Only ORA-16198 has very little information about it.
And its raining in the North tonight so I have to escape before it turns me on.
Best regards
mseberg
Subsequently
Is equivalent to checking. Hoping no news is good news.
I've seen this thing before restarting. Last weekend was indeed an Oracle 10 bark at me during the installation of the entire network has been good. Another error, but I finally tried the same thing and it worked also. No complete sense to me, you would think that the listener would govern. And then it takes the real is what's real.
MS
Published by: mseberg on December 14, 2011 18:47
-
Oracle 10g RAC + ASM + Data Guard: Question on the new disk group.
Hello
One of our clients is to have Oracle 10 g RAC + ASM + Data Guard. Database is the disk DATA_DG1 group and FRA is on FLASH_DG1. Data Guard is a single instance on ASM.
To add more space, we can create another disc of the Group DATA_DG2 on Prod ASM and Data Guard ASM env, replication continues without any problem. Will be archiving logs shipped to the second disk DATA_DG2 group and applied without any configuration changes?
Rgds,Yes, it sounds great.
You should be fine with the implementation of these measures and the dataguard should continue on as usual.
Just make sure that you are dealing with a physical standby that has not the conerts file name defined.
-
Hello
is there a special configuration or guidelines to the configuration data guard on an Oracle cluster database, or as the only forum?
Thank you very muchHello
Do you want to say that each instance on a cluster to own his own spfile, and I need to change each separately spfile to redo waiting for shipment?
All cluster database instances must use the same shared spfile... You can also change the spfile... you will have to update using the command:
alter system set parametername = value scope = spfile sid = InstanceNameMy second question is that each instance generates its own recovery logs to archive, so should not be that database waiting to be ordered into clusters, no? It will applied logs coming recovery for any instance of cluster, is that correct? even if it's only one not clustered instance Eve...
You can have a single instance watch and all the newspapers all primary levels will apply to it...
Concerning
Rajesh -
Data Guard - allocation of licenses and other fundamental questions before setting it up.
Hi all
Please allow me to submit some questions about Oracle Data Guard.
There are 2 databases 'authorized and ready ':
-a single instance of the "alfa", Oracle Enterprise Edition 10.2 database,
-"bravo", Oracle 10.2 Enterprise Edition, Real Application Clusters database
I have to "align" congratulations to alfa on a daily basis, so that--in case of failure of the main 'alfa' site - recovery is possible change to the site "bravo."
(1) even if we can afford a loss of data corresponding to the period little uttered at the end of the last daily alignment (no need to 'transactional' alignment between the two databases), I assume that the best approach to meet this need in terms of efficiency and manageability consists on two databases including in a Data Guard configuration.
Am I wrong?
(2) in particular, the physical implementation of the standby database must be preferred over logic, because that "simpler and faster" in this case. Am I wrong?
(3) only the Data Guard configuration require
(a) additional licenses?
(b) additional material/software resources for host machines?
(5) the release of two databases must be equal to the specific to the component version number (10.2.0.1, for example)? Or, for example, is a 10.2.0.1 able to work with a 10.2.0.3 db db in the Data Guard configuration?
Thank you very much in advance!
Marco mazzocchi
Hello
(1) even if we can afford a loss of data corresponding to the period little uttered at the end of the last daily alignment (no need to 'transactional' alignment between the two databases), I assume that the best approach to meet this need in terms of efficiency and manageability consists on two databases including in a Data Guard configuration.
Am I wrong?
You have reason, physical hosting it good thing. For the most part, you will get impact with until or unless data loss because of some problems of network (or a configuration problem)
(2) in particular, the physical implementation of the standby database must be preferred over logic, because that "simpler and faster" in this case. Am I wrong?
Logical standby is a little different from the physical standby mode
(3) only the Data Guard configuration require
(a) additional licenses?
(b) additional material/software resources for host machines?
Data features come with Enterprise Edition - perhaps for the active database "cost of the additional license.
https://docs.Oracle.com/CD/E11882_01/license.112/e47877/editions.htm#DBLIC109
(5) the release of two databases must be equal to the specific to the component version number (10.2.0.1, for example)? Or, for example, is a 10.2.0.1 able to work with a 10.2.0.3 db db in the Data Guard configuration?
Good level to maintain the same level of oracle binaries / patches and still the support of heterogeneous DG
-Pavan Kumar N
-
Data Guard - RMAN removing archive log
Hello
I ' v DataGuard with physical standby.
I do a backup only on the primaries. Both sites have ther separate backup systems.
I ' v FRA and configured archivelog deletion with RMAN configuration:
on primary: CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
standby: CONFIGURE ARCHIVELOG DELETION POLICY to APPLY ON STANDBY;
It works fine but I think what if scenarios and I'v qestion on best practices for backup after the transition of role management. Let's say that for some reason, as i'v in switch mode sleep for a few days and the backup will be posible to watch (now primary) database. What would be the steps/reconfiguration appropriate to do?
1 should I reconfigure RMAN?
change of new primary to: CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
change back to sleep again: CONFIGURE ARCHIVELOG DELETION POLICY to APPLY ON STANDBY;
2. make full backup
Hello
1. you can refer to the oracle documentation: http://docs.oracle.com/cd/B28359_01/backup.111/b28270/rcmconfb.htm#CHDCFHBG
section: "all archived Redo Log deletion policy."
Document provides the best algorithm to analysis of work
You can use the
CONFIGURE ARCHIVELOG DELETION POLICY BACKED UP
integer
TIMES TO DEVICE TYPE
command to allow a policy of removal of archived newspaper. This configuration specifies that archived newspapers are eligible for deletion only when the specified number of archived log backups exist on the specified device type.If the deletion policy is configured with the
BACKED UP
integer
TIMES
clause, then aBACKUP ARCHIVELOG
, the command copy newspapers, unlessinteger
already exist on the specified device type backups. Ifinteger
are backups of logs, then theBACKUP ARCHIVELOG
command ignores the newspapers. In this way, the deletion of archived newspaper policy works as a defaultNOT BACKED UP
integer
TIMES
clause on theBACKUP ARCHIVELOG
command. Note that you can override the deletion policy by specifying theFORCE
option on theBACKUP
command.The deletion of archived newspaper policy has also options specific to an environment Data Guard. , then RMAN can delete logs after they have been applied to all destinations remote mandatory. If you specify
SHIPPED TO STANDBY
, for example, then RMAN can remove log files when they were transferred to all destinations of mandatory relief.2. the paper provides good information, just to check and decide easily based on the functionality of the database role you can configure.
It will be useful.
-Thank you
Pavan Kumar N
Maybe you are looking for
-
Problem of his iPad after update to ios 9.2
I have ios updated to version 9.2 and my ipad air sound keys stop working. Someone at - it a problem like that? Ty for your help.
-
Satellite A660-1CJ - 8.1 Windows crashes - BSOD bridge.sys
Hello I have a Satelite A660-1CJ, running Windows 8.1 and he already broke 5 times with a BSOD:DRIVER_IRQL_NOT_LESS_OR_EQUAL (bridge.sys) What can I do?
-
HP Pavilion p6767c Motherboard question: Windows 7 64 x The current motherboard on this pc is N-Alvorix-RS880-Μatx, which seems to be manufactured by HP, under the name of Alvorix. The documentation for this motherboard here on your site: http://h200
-
WPC600N PC card Toshiba laptop
I just installed the software and then inserted the card WPC600N. I get no power LED on it. The laptop still connect with the internal network adapter. I tried to disable the network adapter in the BIOS. Still not good. I don't see a Linksys network
-
HP 15 laptop: cannot download Google Chrome on Windows 8.1 / new laptop HP
Hi, I just bought this new laptop HP TODAY ' TODAY - and tried to download Google Chrome and set Google as my homepage because I work with Google products for the last 5 years and this is my preference. However, as a first step, I get a message sayin