Defrag still holding...

Similar Questions

• My sliders in CC are very slow and not even sliding at all still holding show my setting. And my crop is also slow and freezes even what I do!

  My sliders are very slow and not even sliding at all still holding show my setting. And my crop is also slow and freezes even what I do, I need help it is too slow to change this way!

  Hi lakenm,

  Please turn off the GPU in the Lightroom preferences

  Steps to follow:

  Go to preferences

  Click the performance tab

  Uncheck the GPU

  Restart the Lightroom

  Let us know if it helps.

  Kind regards

  ~ Mohit

• iPhone 7 restore from iCloud still holding

  Hello, I have a new iPhone 7. Recently, I had saved my old iPhone 6 and wanted to restore the new iPhone 7 of my backup. I started the process of restoring the day I got my phone and it of been two weeks and is apparently still restore. I often have my phone on and loading and very good WiFi connection, but the restoration has not yet completed. I have some new updates to iOs which must be installed but that cannot be done until the restoration is complete. What should I do? When I look at my phone, it seems that I'm not missing any information. Any suggestions?

  He says that it restores from a backup on your lock screen, is thus that which is telling you that he has not finished?

  You have the ability to stop the restore process when you go to settings > iCloud > Backup? If so, then stop it. It could be an application that has not been fully downloaded, or other media that has not yet downloaded. I got my iPhone do that once in a while and like you, could see nothing which has not been restored. Maybe it's stuck saying it restore even if it's really over. A restore of backup should not take more than a few hours at most.

  If you do not see a way to stop the restore, then reset your unit: hold the home and power buttons at the same time and continue to hold until the Apple appears (up to 30 seconds). Once the reset is complete, the lock screen is displayed.

  See you soon,.

  GB

• 3.0.98 (2.1) issue still holding for text messaging to open

  Recently, I noticed that my phone is now holding still to open the text message, enforcement is not serious if I use the phone app and handcent, they both can take over a minute to open I actually had to touch the screen to prevent of is dark before it could open. I also received each text twice, I restarted the phone and think it may have solved the problem dbl but still slow as hell to open it.

  
  

• I tried to download macOS Sierra for the last hours on my Mac, but it is still holding still to download. Should I download the El Capitan instead? All sites tell me that I should update my Safari.

  I tried to download macOS Sierra on my macbook pro iOS 10 for a few hours and it still has several hours to go. Should I just download the Capitan instead? All sites tell me that I should update my Safari or I wouldn't even through this disorder.

  You must complete the download of Sierra. It is a very large file and will take some time, especially on a slow Internet connection.

  (145165)

• ENVY 4520 All - in - One Printer: Instant ink still holding!

  Hello

  Our small company recently signed for the package monthly instant ink and we have lack of ink about a week ago. We received an email confirming that the ink is on its way; However 5 days later it still not been received and according to delivery it is always carried to the "country of destination" (which is the UK), even though it was 3 days ago.

  We are a new company and have been left without ink for almost a week now, so we are obviously not satisfied with this plan 'Snapshot' of ink!

  First of all, it seems to come from the Netherlands (Holland) - why?

  Second, how long should we wait between our exhausted ink and ink replacement being sent/received?

  

  Thank you

  Vicky

  Hello @MirrorMirror24,

  Welcome to the Forums of HP's Support. I understand that you are concerned about your instant delivery of ink.

  The program was designed with the intentions that the ink would happen until you miss.

  Probably best results if you contact the Department of instant ink directly.

  United Kingdom - 0207-0596-660 HP customer assistance

  (indicating that your call is on instant ink program)

  Monday - Friday 08:30-18:00 (except holidays)

• "digitization of closed captioning" still holding

  I have a Quicktime ProRes file with embedded subtitles.  Whenever I open a project with this file, it scans the subtitle file (say "closed scanning legends dethrone") and takes about 20 minutes (90 min video). While she does this I can't do anything with the video.  It would be horrible if she just did the first time as it does with the audio, but it's every time.  In addition, although first and Quicktime Player says there are subtitles, I still see them in each program, although I have taken the steps to light.  This is a less important issue, I really just want to open it and do not take forever.

  Is there a setting for this I lack that would just disable this option?  Someone else this experience?    I use CC.

  Thank you

  Ryan

  We are aware of this point of pain and are trying to solve.

  A workaround for now would be to transcode the video codec lossless (or almost without loss). If you will be including legends in your project, then you can export it to a sidecar, import this sidecar with the transcoded video, add it to your timeline and synchronize it with the video. You'll probably also want to link to facilitate their changes as a unit.

• Still holding image stabilization!

  Hello world!

  So I've always used iMovie to edit and make movies.

  I am currently a video, only like duration of 3 minutes.

  My first few clips are only between 2-5 seconds each.

  The first 3 stabilized without any problem, only took a minute or two. After 3 of them stabilized well, none of my other clips will be.

  For example, this clip, I'm working with right now is only 3 seconds long and tried to stabilize for HOURS.

  I tried to restart iMovie with no result. I left it running while I went to dinner to return to stabilising. So I tried to move to some other short clips and I always use the same question. It's so frustrating!

  Please, I hope someone has an answer for me!

  Now, he has decided to work!

  Do not know how to remove this element

• iMovie library moved but still holding the disk space

  I create separate iMovie libraries and record them on an external hard drive so that they take place on my computer drive. When I look into iMovie, all the various events, I had aren't there, so it would seem that save them to the external hard drive was working. However, my storage show a huge amount of space is being taken up by movies! Under "movies" in the Finder, I clicked on "View the contents of the package" for the iMovie library, and it shows all of the projects I have and under each one of them is the original media that I had moved on the external hard drive!

  I am very confused as to why this is happening. The raw images should not be on my computer if I'd put away them!

  They are not under the iMovie library when the program is opened. Should I remove the projects too?

  I'm running iMovie 10.1

  You seem to have copied and not moved.   How exactly did you create and populate the libraries on the external hard drive?

  Geoff.

• Installation fees still holding

  I started a new mountain lion facility last night. Fisrt showed 7 hours left... Its been 12 already... And glued with 1 minute remaining for the past 60. What should I do?

  Try the computer using the power button / stop, and then restart.

• Cliq 2.1 install still holding

  I've been installing for over 3 h., he made the blue bar with the # and the Moto blur for screen rose again and again for 3 hours. almost at the moment.

  What is going on. Really last that long?

  You need to perform a factory reset your phone which will wipe.

  See here:

  https://Motorola-global-portal.custhelp.com/app/answers/detail/A_ID/58465

• Update still holding

  Received yesterday new laptop computer with windows 7 starter. Went on line last night & all right. Today I got a message in the sense of "when you next start your computer Windows will install updates.

  Stop & started the machine and went to do something else.

  Currently, there is a background on the screen, the 'busy' circle spinning & the following message: Please do not power off or unplug your machine. Installation of update 37 43.

  There is a small hard drive activity (not much), but there was no change at all to the message at least the last 2 hours. Rebooted the machine a few hours & haven't looked for messages.

  There are no icons on the screen & mouse does not work. What should I do? Fortuneately I created recovery disks yesterday.

  Finally after another hour or 3 I removed the battery (was the only way out) and then restarted. After that 2nd reboot starts & it seems to work OK!

  Now look at Linux :-)

• First backup still holding...

  Received my new Lenovo T530i yesterday and started making disks backup for the first time. Well, it has been almost 6 hours and taken so far 10 CD of 700 MB each. Is this typical? I also want to make a backup on a 32 GB USB Flash drive. I think plug the flash drive until I go to bed tonight, and hoping the back-up will be all done when I wake. Taking this process so long?

  I'm a Seagate 500 GB backup. Thanks for your comments!

• Help and Support Update, still holding

  My computer is running Windows Vista. He tried to install a recent Windows recommended update that was supposed to update the help files. Installation is stuck at 100%, but I don't know if it's over. Now, whenever I restart it sits on configuring updates forever. I don't know if he can never 100% Setup because I fall asleep before it is done, and when I wake up it is on my login page. However, when I connect and then try to use 'Help and Support', I get the following message, "help and Support can not open because Windows Update installs new help content. You can start Help again when the update is complete. "It's been 4 days and the update is not complete! Is there a way to stop the installation for my computer is not constantly trying to set up and I get locked out for hours when I restart?

  Hello

  I suggest you to refer to the link below and reset Windows Update components and check if that helps resolve the issue.

  http://support.Microsoft.com/kb/971058

  Check also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• vmcli still holding

  Hello

  Im trying to mount foo.iso (3 MB) on a remote host via the utility vmcli of idrac7. I ran the following:

  / opt/Dell/srvadmin/bin/vmcli - r ip u uname Pei pwd - c foo.iso
  Security Alert: certificate is invalid - certificate of self-signed
  Continuation of execution. Use the-s for vmcli option to stop running on the certificate-related errors.
  Connecting to the server...
  Ip connection
  . Success of the opening session.

  Mapping foo.iso to the remote device [0] read-only. Success.
  ......................................

  The points seem to be appearing for ever and vmcli makes return nt. Do you know what past maybe?

  Here is some information I got on the bmc via ipmitool:

  Device ID: 32

  Revision of the device: 1

  Firmware revision: 1.66
  IPMI Version: 2.0
  Manufacturer ID: 674
  Name of the manufacturer: DELL Inc.

  PL let me know if you need more information on my side.

  Thanks, Aish

  To use this command, you must manually change the boot sequence and make the virtual drives as first boot device. There is another command that works for you and no manual changes required on the server.

  To set Virtual Floppy as first boot device

  put racadm idrac.serverboot.FirstBootDevice vFDD

  For start once

  racadm set idrac.serverboot.BootOnce Enabled

  For more help on these commands

  racadm help idrac.serverboot