degrading

Similar Questions

• Browser is degrading?

  BRO in law can not pass of Snow Leopard to upgrade his Safari. Now, he gets messages saying its "browser degrades? Why cannot upgrade us its operating system and its browser Safari...

  Safari is a part of Mac OS X, and the only way to get a more modern version is to update your computer.

  How to get macOS Sierra - Apple Support

• WiFi to my Time Capsule still degrades 2.4 GHz instead of 5 GHz

  My capsule of time always degrades to the band of 2.4 GHz instead to be linked to the 5 GHz band when I'm browsing the internet, doing someone knows if it's an antenna, problem of router or a drop of water lost connection Bean, thanks.

  Your Time Capsule is not downgraded to 2.4 GHz at all, it's always the production both a 2.4 GHz and 5 GHz network at any time. That's why's called it a double router broadband simultaneously .  Wireless devices will be automatically connect at 5 GHz or 2.4 Gz based on their own abilities and their distance from the time Capsule.

  5 GHz signals are 'faster' signals, but they are also 'weaker' signals, so you no longer have a lot of success with 5 GHz when wireless devices are in the same room or have line-of-sight to the time Capsule. Once a device moves a piece or more away from the time Capsule, the device 'sees' the stronger 2.4 GHz signal here and commute to 2.4 Ghz for the connection stronger.

  Unfortunately, once a device powered 2.4 GHz, usually not going to happen 5 GHz unless you temporarily disable WiFi on the device and then turn it on again. If the device "sees" a 5 GHz signal strong enough, then it will connect to this network.

  If you want devices to connect at 5 GHz, using an option to assign a different name for the 5 GHz network, you can "point" or "force" devices to connect to this signal.  The downside to this, is that you also need manually "perpendicular to the" 2.4 GHz devices if they are located a few rooms away... Time Capsule because they may not be able to pick up even the 5 GHz signal to this place. "  Even if they can, the 2.4 GHz signal will be much stronger and probably faster than the 5 GHz network.

  After the back if you need some tips on how to assign a different name for the 5 GHz network.

• What should I do to get the degraded version

  new version deactivate my McAfee instead of get a magnifying glass whenever I visit a website in order to correct that I need to the degraded version, how can I do this?

  I believe that we no longer support firefox 4.0 so here is the link to 3.6 please select your locale

• Qosmio G30-145: RAID1 is degraded - KRC RAID configuration error

  I made a few mistakes... I installed the German version recovery dvd OP and during the installation of my foolness I fact also (mirrored) HDD = HARD drive... something like that...
  now there is a denunciation of the BACK: (if I wanted to get it back once more from toshiba dvd recovery, because I did the format...)

  in the black window:

  Manage the RAID configuration.
  # Mode GET1 F
  # 0 x 00 not 'F' flags!
  Get the current status of RAID...
  RAID level = RAID-1 (mirror)
  Status: degraded
  : Error KRC RAID configuration!
  Please go to BIOS to set up a valid RAID configuration. (I tried all variations... but without success... every time the same thing...)
  Press a key to continue...
  end

  HOW TO SOLVE THE PROBLEM?

  Hello

  Ok. You have changed the RAID settings in the BIOS.
  In my opinion, you can use the CD of restoration with the default RAID settings in the BIOS.
  I mean that the RAID driver on the recovery cd was preinstalled and you have changed the settings RAID in the BIOS for the recovery CD did not work properly.

  Do not mix the original Windows CD from Microsoft with the recovery CD. The CD-ROM of Microsoft the RAID driver is not, but on the recovery CD.

  I checked the Qosmio manual I found on the Toshiba site.
  If you want to install the original WinXP you must safe the RAID driver on the floppy.
  In addition the in table settings BIOS RAID, make sure that the built-in HDD is set to 1RAID-0.

  The RAID in the BIOS configuration settings are described as follows:
  JBOD - parameters without RAID, Windows cannot be installed on this drive except by using the recovery CD/DVDs.
  1RAID-0 - compatible set RAID. Windows can be installed on the drive
  2RAID-0 - 0 for 2 hard drives RAID set
  RAID 1 -RAID-1 set for 2 hard drives (current only)
  UNKNOW - State RAID except the State and settings (State only) above
  No. Drive - no hard drive connected

  If you accept the settings you must type a string: 1,2,3,4 then enter. At the end you must save all change in the BIOS.

  You have suggested that you have the German language. If you want to read the manual in English you can download it from the site.

• rebuilt drive ReadyNAS 104 replaced always display data degraded data

  Have a 104 - drive in slot 1 readynas failed-

  tested the new drive all tests

  replaced by model and brand

  It detects and rebuilt volume showing raid 1

  Once rebuilt still happens with degraded volume

  running latest firmware

  Have you tried restarting and once rebooted begins the rebuilding process again?

  Someone has any ideas

  Thank you

  Well I would like to back up the data to another drive if you can (do not try and replace the existing data).

  Then with only good new records in the NAS do a factory default (erases all the data, settings, everything) and restore your backup data.

• Marvell degraded after any installed software or update table

  First of all, this isn't my first raid array (of any type) so I have a little experience and think I understand 'General' principles to govern the raid if arrays an array of hardware or software. That said, it's my first painting of controller Marvell. It is a D20 (Windows 10 PRO) with the Marvell controller on board. RAID5 on 4 popular Intel SSD with a hot spare. What is happening is that, whenever there is an update or install new software, when you restart the dashboard reports (via bios) that the table is "degraded". It's always the same physical disk (#15) and the table rebuild after that select this degraded by car. If it's always the same disc, is the reader 'wrong', and how test drive?

  I noticed that the MRU offers a few options 'Adapter 0' including 'Synchronization rate', 'Initialization rate', ' rebuild ', 'optimize CPU efficiency', 'Automatic Reconstruction' and 'Survey S.M.A.R.T. Status' adjustments. What are 'best practices' for these parameters? Surely there is somewhere I can read about setting options? Can I activate the option 'Auto-Rebuild' or get some other issue I should be concerned? (Like a bad drive?)

  Thoughts?

  Well, as I had new SATA cables, I changed all four cables. And now on restart each port is followed by a single point. I'm comfortable that this problem of 'bad' SATA cable has been the heart of my problem. Time will be the test final but, I'm pretty comfortable that the new SATA cables has solved my table degrading the problem. I have jusat struggled to imagine that, on four, a new ssd could be bad. Turned out to be a simple mechanical failure of a cable connection. Maybe it was an intermittent connection, maybe bad wire... is okay now, it seems to be fixed.

  Thank you, Erik, for your help and your suggestions.

• Table of RAID5 degraded after system updates

  I have a D20, I did a 'fresh install' W7 on a RAID5 array I have set up in the bios (ctrl + m). Now that the system has updated, restart the bios says "degraded" table. Entry (ctrl + m) shows a drive's "rescue", second disk as 'free' and two other "assigned." (It is a RAID5 with four discs). I can't locate instructions to access the MRU. Lenovo solution center the table is 'good '. When installing, I put the first HDD as "backup" and the other three as "affected". Why updates fall (or release) one of the disks? How do I enter MRU? (MRU is the last installed version of Lenovo source.) Suggestions?

  Interesting. It must have only deflated the package and does not not through an installer to put in your Program Files directory.

  Glad that worked for you. Let us know if you need assistance with your table. I hope that all rebuilt without problem.

• Degraded data please help im know if everything lost

  Hi, I recently bought a "new" rn21400 4 unit without drive Bay and two new disks 4 TB Western Digital RED.

  everything has been works well since I've set up three days ago, today I though I would transfer the last of my documents to the nas to my pc (approximately 250 GB of photos and music) before completing about 70% done the unit began flashing data degraded

  When I checked the volumes on the admin page one of the disks is red and when the information arrives he says bad disk.

  It is said with xraid on a raid level 1 I believe that must have 4 TB of backup?

  What should I do? I was really not lucky and got a faulty drive or a simple restart and resynchronization or other difficulty there. There is a lot of data on the nas about 1.2 TB of films, working papers that I really can't lose, ive so them removed from my home pc as I well they have ended safely to the nas.

  Help, please

  RAID-1 provides redundancy backup.

  With RAID-1 when a disk fails and you add a disk to a resynchronization is triggered. This puts heavy emphasis on all disks that the disks must be synchronized by sector. As the disk that was considered to be failed is added in the table it has probably been deleted. If the other drive happens to fail during the resynchronization (unlikely, but possible) then you may lose all your data.

  So if your data is important just store them on an SAR unit. You need a backup to another NAS unit or somewhere else. However, if the primary copy of the data is on your PC then copy on the NAS server is a backup.

  It would be helpful if you could send your logs as suggested BrianL.

  You cannot add smaller disks to X-RAID volume, but you can disable X-RAID and create a second volume, or you can reformat all (for example to do a factory reset) and create a new volume using all four disks.

• HP Envy 14 w / Nvidia GTX 950 m: degradation of Gaming Laptop HP Envy

  Hello

  I recently bought my laptop HP Envy a year ago and I used it moderately for school and work. I made sure to buy the GTX included 950 m graphics card so I could play some of my steam games and I'm just starting to achieve a degradation in the performance of my laptop. I do not speak of degradation when I bought the laptop so far but I'm not talking about just playing a game and having amazing performance (graphics on medium-high and about 50 to 60 images per second), but after like 5 minutes of play he is slowly starting to soak as 14-15 fps. In particular, I tried playing Overwatch today and had an amazing gameplay for the first 5 minutes, but I dropped up to 15 images/s and it's hardly playable. I tried to change the resolution and that seemed to have fixed however the same problem happened five minutes again.  I have no idea why my laptop it would especially since I have not really used a lot for the game this year and I'm sure to maintian computer performance by updating the drivers, reboot often and defraging.

  CrazyAce

  I think that I finally found a solution to the problem. I was on my laptop of friends (which is similar to mine) and noticed that she had not updated its geforce experience. So I've updated for her and she began to notice the same problems I had. It turns out that this experience of NVIDIA GeForce is not really necessary for the games because it does not include the graphics driver. So as soon as I uninstalled, all started to run surprisingly. Time just in the better together performance and faster startup, no fps drop. Who would have known to try to uninstall the software, only that I have to refer to the graphics card to make my graphics card will be smoother and does not affect my computer.

  Thanks for the time to help out me if. I'm so happy that I figured this out.

• A degradation of the WiFi Signal with laptop lid closed

  I have a HP Presario DV6 running Windows 7 64-bit.

  It has an Atheros AR9285 802.11b/g/n WiFi Adapter using the 8.0.0.172 driver Version dated 09/23/2009

  I noticed that if I run the laptop with the lid closed there is a degradation in WiFi signal.  More specifically, with the lid open, I can see the signal from my router with - 77dBm, but with the lid closed this fall to-87dBm. (No other changes to the environment)

  I checked all the power settings to keep the NIC power on with the lid closed.

  This deterioration is simply a feature of hardware design and antenna site is there anything I can do about this other than get external USB network card?

  Hello:

  I recommend that you only install the latest driver. Who can help a bit.

  But the main reason why your signal degrades, it's because the antennas are under the screen. When the screen is opened, they stick to the top. When closed, they are ineffective, because the ends are oriented horizontally and lower (toward you) instead of vertically.

  Latest version of the driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-95105-1&mode=4&IDX=2&prodTypeId=12454&prodSeriesId=316720

  Paul

• Degraded signal: PXI-2501 1 wire 48 x 1 w / TB-2605

  Dear friends,

  I have a PXI-2501 configured in 1-wire 48 x 1 w / a TB-2605 terminal block.   My goal is to move analog square waves generated with a PXI-6259 to a Bank of several LEDS.   Last week I posted a question about the wiring of the TB-2605 and wired my block according to the jpg (attached below), I received.   Unfortunately I'm having a degraded signal once routed through the switch... Very dark LEDs as opposed to very bright cases, I connect directly to the channel of the PXI-6259 AO.   My first thought is that there is a bad connection GND somewhere in my wiring.   However, before you disconnect the wires and hunt this grimlin with the voltmeter, I would like some consensus of the other members on the diagram below.   I'm wired up properly?

  Thank you

  Zach

  Hello Zach,

  What features of the PXI-2501 make it suitable for your application?  Have you considered using a different switch?  The PXI-2503 has the same 48 x 1 1-wire topology and can be used with the TB-2605 terminal block.  It's spec'd path resistance is < 1="" ohm="" and="" bandwidth="" is=""> 10 MHz.  The PXI-2503 using electromechanical relays, so this module has a life expectancy over relay and a rate of slower cycle compared with the PXI-2501.

  The PXI-2503 might work best for your application?

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA

• Sensor mapping VI Express performance degrades over time

  I was trying to make a visualization 3d of some data from the sensor. I did a template and was able to use with the 3d photo tool sensor mapping Express VI. Initially, it seems to work perfectly, and I started to increase the scene with other objects to improve the user experience. Unfortunately, I think I am doing something wrong, at this point. When I add the map sensor object to other objects, something like a leak memory occurs. I'm starting to experience the degradation of performance almost immediately.

  I don't know how I should add to better add in reference of the Map sensor to the scene as an object. Normally, I create these child relationships first, before doing anything to objects, beyond creation, movement and anchorage. Since the map sensor output reference is available only AFTER the express vi run. My compromise solution, currently, is to have a case statement of controlled by the constant "First Call". So far, the performance seems to be much better.

  Does anyone have a better solution? Am I even manipulate these objects the way the t community - it?

  EDIT: Included the vi and stl files.

  I agree with Hunter, your current solution is simple and effective, and I can't really see a much better way to accomplish the same task.

  Just as a side, note the simplest and the easiest to force the order of execution is to use the error on the functions and the screws in your block diagram. From here with an example based on the VI VI you have posted. (If you paste the image into your drawing, you can make changes to the code)

  

  Given that you have expressed an interest in the documentation links to 3D image controls, I did some research and found a few articles that might interest you. There is nothing terribly complex, but these should be a good starting point. The first link is a URL to the thread of research, so you can get an idea of where this that I'm looking. You will get more hits if you search of ni.com rather than ni.com/support.

  http://search.NI.com/nisearch/app/main/p/q/3D%20picture/

  Creating a scene in 3D with 3D picture control

  Configuration of a 3D scene window

  Using the 3D picture control 'Create height field VI' to convert a 2D to 3D image textured heigh...

  With the help of lighting and effects of fog 3D Picture Control

  3D picture control - create a moving Texture using a series of Images

  Change of set and the background of the 3D picture control

• is it possible to upgrade/degrade my vista because of bugs?

  Is it possible to degrade/update my windows vista free to 7/xp, all the time since I bought it (I think it's more than a year ago) it was screen 'look', when I play a game like counter-strike: Source or Titan quest (almost all funny games) it takes like 20 seconds to 1.5 hours, and then it gets buggy as next points on the screen in green squares of purple and lines of walls and characters and everything so I don't even know what I'm doing, it's so boring when he's like that. the only thing that works for me it is CTRL + ALT + DELETE, and then click Cancel, but then it takes like 25 seconds and he returned once again, even more

  Hello OscarH1993.

  All first to the top make sure you have the latest video drivers installed for your machine, if you post back with what graphics card you are using, we can help you further.

  Symptoms that you describe are almost always because of old video drivers or even worse, a faulty hardware or overheating.  Change just the OS probably won't help any.

  Get the latest drivers for rule than to go out and give the events a good clean out.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Degradation of internet WRT110

  I have a PC and a laptop (the two valleys on Vista).  The PC is connected to to the WRT110 and the laptop is wireless.  Provider is Time Warner (Kansas City).  When I do a speed test on computers (through the router), it is generally between 3.5 and 5.0.  I called Time Warner and at the suggestion of the technology on the phone, I unplugged the connection of the cable to the router and directly to the PC.  When I ran the same test of speed, she came significantly closer to the announced 7 MB.  He did not go with the laptop, but guess I would get the same results.

  http://www.Speedtest.net/result/626291619.PNG

  It's my first router wireless, so my question is... is this normal for a router to degrade an internet connection so significantly?  I expect that the mobile wireless can be a bit slow, but I was stunned (and frankly, quite irritated) that the PC wired directly to the router is affected.  Any ideas?  Thank you!  Jason

  You won't get the same exact speed of the router... that you are getting the modem because the router is somehow a firewall.

  Although try the following settings on the router...

  -Change the MTU to 1300.

  -Change the band Radio of Standard - 20 MHz and the Standard 11 - 2, 462 GHz channel.

  -Uncheck the box filter anonymous Internet requests on the Security tab.

  -The tab settings of Advance Wireless... Change the interval of tag to 75.

  Keep updated on the router firmware. You can download the latest firmware from www.linksys.com/downloads.On configuration page, click on the Administration tab, update the firmware.

• Degradation in speed WRT610N

  IT pro with a new router WRT610N - Firmware Version: 2.00.00 B05

  Connection Internet is a cable modem of 30 MB and I have connections wired two gigabit for the WRT610N and two 100 MB wired connections and multiple wireless devices.  I use WPA-2 on both bands and MAC address filtering.  I have NO problem with the wireless, in fact, that it runs better than I expected.

  HOWEVER, my internet connection the router's wireless AND wired connections is deteriorating in the speed of 25-30 MB up to about 5 MB on a daily basis.  If I just restart the WRT610N, back right connection speed shoots up to 30 MB each time - this leads me to believe that the WRT610N is the culprit here.  I don't have any special settings other than a few forwarded ports to my desktop and I don't see any wandering TCP connection when these speed degradations occur.  Even a restart of the computer has no effect.  Apparently, it is in the router.

  I would like any suggestions you all have in this case - as I can hardly believe that I am the only person with these symptoms.  I have been using Linksys and Cisco equipment for many years and have never had a problem.

  Please, let me repeat - this is NOT a problem with my wireless, so don't suggest things like disable MAC filtering and others - this is specific to the overall speed of connection to internet via the WRT610N Wi-wired connections AND.

  Thanks in advance!

  Brian

  Contempt, people... I found the culprit!

  This stupid "Home Network Defender' is apparently ONE by default.

  Problem solved.