Dell 960 reports 'No bios' - LED flashing 2,3,4 and button / stop Amber

Similar Questions

• Officejet 5610 starts slow printing and button / stop flashes

  This just started happening.  A document (no matter what I print) will begin to print, get the first two lines printed and then take incredibly slow.  Meanwhile, the power LED flashes and the message says "print...". "If I restart my computer and as you turn the printer power on and off, it will correct itself.  Anyone else have this or know what to do?  Thank you

  Looks like the printer can be connected to a surge protector and the surge protector can not provide the stream of electricity the printer needs since it starts then slows down and the power LED flashes.

  The printer is connected to a surge protector?  If so, plug it directly into a wall socket.  If it's related to the surge, the question shouldn't be present.

  Let me know what happens.

• BlackBerry, BlackBerry Z10 Z10/Z30 does not start, the red LED flashes 1 x long and after a few 6 x

  Has somone a simliar Isue?

  BlackBerry devices running out of power and stop. When the connection too provide flashing red light in the upper right corner of.

  Error code: 1-time long red flash, 6 - time short red flash

  Thanks for the short answer!

  Connect to the wall charger.

  Let it charge for several hours.

  With it, ALWAYS connected to the charger, remove the battery a mimute, replace and reboot.

  What is going on?

• updated from Leopard to Lion, now Flash is unstable and crashes. An ex-Microsoft I had updated Flasj, Lion, Mozilla and no question. When I opened more than 5 windos or tabs, Flash falls down regularly and I stopped using Mozilla

  The material is IMac mid 2010 release with the latest updates. A 4 GB memory. A great deal on Leopard, fails only with lion. The key is to limit open windows or tabs which is unacceptable for the use of the browser.

  occur even on Firefox 10?

  • getfirefox.com

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• Satellite Pro M10 cannot start properly - AC LED flashing orange

  Hello

  I have a weird problem that I can't solve.

  (1) when my Satellite Pro M10 the plugged AC adapter and the battery, the AC led is green and battery led is orange.
  (2) when I try to turn it on, several times it not light and the dissepear of leds for 1 or 2 seconds and my AC led flashes orange. Sometimes it lights up as it should be.
  _________
  When this problem occurs, it will take a lot of time before it turns normally. I searched the internet for a solution, but I couldn't find one.

  I already removed the battery and try to turn it on, but it does not solve the problem. Or when I remove the AC adapter and try to start it on the battery itself.

  I also removed the two of them and you press the button power on for 60 seconds. After that, it will sometimes start with mains or battery adapter.

  My bios is updated to the latest version. (I've done this when he started only five minutes ago, but the problem is not resolved). I also believe that when the m10 is enabled and when I close it, it crashes also.

  Do anyone know how to solve the poblem? Thanks in advance.

  Hello

  These problems are very rare and shouldn't t happen if hardware or software is ok.
  Power LED blinking orange means there could be a hardware malfunction.
  It is a code flashing microphone and a technician can be read.
  This code must be translated into the hexadecimal digit.

  But for ordinary users it s not able to know what it means. In my opinion a power electronic malfunctions and must be verified by an ASP.

• Qosmio G50 - 12 q - AC IN LED flashes orange

  The PC and ' connected via the power supply current and when I turn the pc off by a button on the LED blinks orange on the PC AC. I declare that the PC and ' off for a week and there is no overheating problems. Although the detachment of the PC Power Supply LED continues to Flash orange.

  I tried to remove the battery and reinsert it. UIL LED has stopped flashing and the market by pressing the button on the PC again but ' whenever I have to remove and replace the battery for por make sure the PC is delivered on a regular basis by the top off button.

  What can 'depend on. a battery problem because if I remove and reinsert stops flashing and lights up again?

  Hello

  I never heard of something like that it s really strange that you must remove the battery before you start the computer
  Do you use the of original AC/DC adapter and battery?

  What you might try is updated the BIOS. You can find it on the Web from Toshiba website.

  But my personal opinion: it s a hardware malfunction and that means you need professional help from an ASP :(

• Satellite A500-1DN (PSAR3E) - Dead BIOS after flashing

  Hi all.
  First of all, sorry for my English.

  My problem is simple, I have a bios dead after flashing Toshiba service station (or something like that).

  How it happened? : 4 days ago, it asked me to update. It was for me quite normal because she asked for updates on a daily basis. I enablished day and after a few cliks on button then I noticed it has been updated to BIOS and is almost in half. I wanted to wait to the end (because I know if I stop uptade of bios, I end up with dead bios (bios corrupted)) but collapsed almost at the end and he showed me a few errors. After that my laptop did a restart and I couldn't stop it. He died.

  Now, if I push the power button / stop I get a screen black (as it is off) som LED turns on and the Cpu fan to perhaps 10%.

  What I did the last 3 days? : I searched all the residents on what to do with it. I tried maybe 10 types out crisdisks with usb and CD (with floppy isn't becose Bios for my laptop is too big for 1 floopy).
  I tried to start with FN + B this has worked for me CD player began to search for CDs, USB key showed activity, but dead end happened nothing. I tried to make the Boot usb with the latest minidos.sys and phlash16.exe. I tried to combinate but still nothing.
  I tried everything I found on internet forums around. Nothing helps.
  Another thing is that only bios I found was 1.90. If anyone has an older bios for my laptop pls give me a link. I'm losing hope becose I can not find anithing on google.
  I am an advenced user I almost did this medication with the pc, but I've never worked with dead bios.

  Pls someone help me and give me a correct crisdisk for my model. Or another sugestion.

  Hello

  Sorry, mate, but you should contact the http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/ ASP.

  Unfortunately, the warranty does not cover failure of the bios and you will have to pay about US $ 50-60 (anyway, it costs like that in my service center)

• Satellite L40 - 15 G - LED flashes

  Hello, I have this problem, the toshiba satellite L40 - 15G, junt does not illuminate.

  I already remove it from memory and try the power up, nothing.

  I already measured AC adapter / DC, 19v is ok.

  pressing the power button with battery on adaptor taken 30 seconds and nothing.

  The only thing appens, led light, the power light green and orange battery light, appear, and the battery orange flashing with green led power light.

  I mean, seers green rest power one and the battery led flashes, I unplug the AC adapter, e reconnect and the 2 green led watch on and orange, in a few seconds, stars blinking the led battery led (orange) and rest like this and nothing of power up... help please.

  I already try universal adapter and nothing, in addition to this question... really helps.

  And nothing moves fans nothing, only the led lights.

  Can someone help, please.

  Greetings to you all

  Also on my side i have the power to change, and the back side of the Commission, have nothe pass as the power switch, if a press led ligh e stops, I'm talking about, I have everything ready dissamble boad ok, on my hand, I found this switches... what he for?

  And some one take the battery CMOS, in frist place I guess is not a problem, only the Don t of the bios, save the changes I did, plase can one help everything, everything...

  Find the testicles or, thank you!

  I can tell you with certainty what s wrong with your laptop, but I guess that its a serious problem of motherboard.
  Perhaps the electronic power supply on the motherboard is affected.

  Fact is that this isn't the battery problem. Why? Because the laptop should work without the battery, but comes to connect to the network.

  You said that the adapter is OK. Well, it means that the battery and AC adapter isn't the troublemaker you said that memory was also tested.
  So this isn't memory problem and, therefore, I think, it could be the related problem of motherboard.

• Occasional BIOS LED Code 2

  Sometimes (about once every two weeks) when I turn on my computer, there is no the BIOS boot and get a pattern of flashes of my NumLock and caps lock LED. (ON-off-ON-long stop, repeat)

  I looked at the LED code, and it says I have a BIOS Corruption failure error. (My laptop does not restart during this error code)

  I noticed that the problem occurs only with a single USB port, with any device. Is the lower USB port at the back of the laptop. I met the problem with a JVC Everio camcorder and a memorex rotodrive.

  My P/N is NB224UA

  Edit: I solved the problem. I uninstalled all USB hubs in Device Manager and rebooted. Once reinstalled Windows the hubs, the problem occurs is no longer.

  Message edited by Corner_G on 06/23/2009 15:59

• Power supply question - amber LED flashing - Dimension E520

  So, I'm working on the dust removal and re - install windows on a machine. I've done dusting, but now I have problems with a LED flashes orange. The system will not top all - fuel without fans or beeps.

  After looking through some posts for ideas, I think it is a bad power supply or a problem with the heat sink.

  I think power because this seems to be a common problem. How can I test the existing? Is there a way to fire unless it is connected to the motherboard?

  The reason why I am wary of the heatsink is that I removed it when I was doing the dusting. I had the intention of fire tonight and get a new thermal paste in the coming days. Since then, I have read that this could be a recipe for frying the total CPU and I wonder if the machine is not pulled up like a check for free preservation any.

  It detects if I removed the heatsink? If it's happening, it will automatically detect when the new thermal paste is in there? Or is there a reset procedure any?

  Any help would be great. Thank you!

  As a side note, the design of this box is poor. I can't find some way to dust effectively the heatsink without removing it from the central unit. Supply openings do not match, so you cannot blow a good flow of air through the box.

  chelseasounder

  A flashing orange switch LED means that the computer is under voltage, but a power problem internal may exist.

  This may indicate a bad diet

  Are the Diagnostic LEDs on the front panel lite?

  The diagnosis Codes are HERE. NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Have you checked that all the cables to the motherboard and the disks are properly connected, by disconnecting and then reconnecting them?

  Bev.

• Master of IO card blue LED flashing

  Hello, I have an alienware aurora ALX R4 and when I opened the door to have a peek inside I see a blue LED flashing on the master of i/o board, is - this normal?

  Ahmed I can only say that it is not a question based on the Area-51 MIO. Issue 3 of the LED flashes (blue) and it is close to the part of READING of e/s of the MIO. Just to see these messages on the Diag tests:

  en.Community.Dell.com/.../20148230.aspx

  en.Community.Dell.com/20128296.aspx

• Reconfigure RAID (Online Capacity Expansion) does not work for non Dell drives in the bios and is not available in OMSA for VMWare

  VMWare users have found a solution for the following?

  Readers of PERC H700 and H800 (firmware current 12.10.4 - 0001 A10, r610 servers) allow the user (in the bios during startup) to create new virtual disks using non Dell drives, but you cannot expand a virtual disk existing readers not Dell, when in the bios.  The option is grayed out.

  OMSA for Windows bypasses it.  Virtual disk | Tasks | Reconfigure can do online capacity expansion and accepts disks not Dell for this.

  Problem is OMSA to VMWare ESXi (v7.2, the current version and older versions) doesn't have a virtual disk tasks fall to the bottom.  You can not even a hard drive flashes.  (VMWare ESXi = v5.1)

  The only solution we can think of is to have two drive arrays connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the virtual disk using OMSA for Windows.

  I would be interested in the comments of others, including those of Dell.  We spent hours on the phone with Dell; This seems to be the only solution.  (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).

  The firmware update the unlocked non certified discs was in July 2010 (two years ago).  No latest updates seem to speak of changes/updates to update that.

  I don't know why uncertified discs would be blocked for a single operation (expansion/reconfigure) - are get you certain types of message that certainly is the case?  Did you do that with certified readers?  Last I heard, Dell had a firmware update in the works that would allow an extension to get the CTRL-R utility, where it historically could not be done from there.  12.10.4 as of 2012, I guess (if the Dell guy who told me he rode was OK) this update has not been released yet... However, I could be wrong.  I don't have a H700 to test with, but you can try OMSA live as an alternative to the construction of a temporary Windows Server to try the expansion of the OMSA.

  Linux.Dell.com/.../OMSA-71-Live

• Toshiba 22L1334G - green LED flashing and TV does nothing

  Hello, I have a 22L1334G and I had my tv problem is that every time he has cycled from st - by situation is that the first tuning has been activated that he had just bought. Do you want to download the latest version of the software on the web that corresponds to the version V3, 6 3 and now my camera is left with the Green LED flashes and does nothing. Could someone help me.
  A welcome message

  Same problem with 32L1334DG