DeskJet 2540: Deskjet 2540 wireless configuration

Similar Questions

• Deskjet 3520 wireless configuration

  I have a new Deskjet 3520 all in one and I'm trying to get the ity configuration. I have the Mavericks 10.9.2. I downloaded the software and drivers on the HP site. I installed the software successfully and the HP utility has started, but it's stuck on the first step in trying to find the printer. It has been tried for almost an hour.

  Instructions on the HP site say to use "Auto Connect Wireless HP", but this isn't an option.

  Can I configure the device manually? The printer itself doesn't have an IP address, and the wireless light flashes. This configuration does not work why?

  Instructions on the HP site for my printer and operating system did not work, so I had to connect via USB to set up wireless printing. Who succeeded. So for someone else with this configuration, trying to follow the instructions from HP I suggest just connect via USB temporarily.

• HP 2540 wireless connection problems

  My HP 2540 wireless printer is not recognized when I send prints, but I can scan and save her

  Hi Laurence,.

  Thanks for posting your query on the Microsoft Community.

  Printer wireless HP 2540 as described in the question is not recognized on your Windows 7 computer. I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Are all the device drivers and updates of Windows updated?
  2. Did you check with any other wireless device? It works well?
  3. Do you have any specific error message/code when connecting to printer? If Yes, what is the exact error message/code?

  So I suggest you try the below mentioned methods and see if it works for you.

  Method 1

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2

  You can also try running the fixit provided in the following Microsoft article.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 3

  If the problem persists, I recommend that you completely uninstall the part-time driver that has been installed on your computer and then download the latest driver on the printer again manufacturer site.

  Step 1: Try to remove the printer by following the steps described in the following Microsoft Article.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Step 2: Find and install printer drivers in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Additional information:

  You can also view the article mentioned below for troubleshooting printer all-in-one HP Deskjet 2540

  Hope it would help. If problem persists always post returns with the required information and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Deskjet F4580 wireless

  F4580, printer works perfectly with my computer USB connection. Receipt of message of congratulations for a successful wireless configuration, but the documents go into a queue and will be printed not with Wi - Fi.

  Would appreciate help.

  Hi shaun1,.

  Welcome to the Forums of HP Support! I see that you are interested to set up your HP Deskjet F4580 to your wireless network. You have a USB connection, but when you attempt to print via your wireless network it does not cross.

  I would like that you start here: installation of the software of the printer for a wireless network connection, once on this page please select your current operating system and proceed with the instructions.

  I hope this helps!

  Thank you

• HP 2540: HP 2540 wireless

  You just bought the HP 2540, downloaded HP eprint app, etc. to use with my ipad. I'm not using / installing the software with the CD rom and do not have a desktop computer. I just want to use the printer with my ipad. The printer works, but I have to sign out of my network wifi (AT & T) and then select the use / wifi the printer to print anything. Is there an easier way to do this? How do I just click on print without having to turn off the wifi network? When the wireless test printed results it says that the HP printer is unable to connect to my wireless router. I don't know how to fix it. Thank you.

  Hello

  Try this and let me know if that can help you:

  1. Connect to the network printer.
  2. Open Safari and go to http://192.168.223.1/
  3. Open the network tab and look for the wireless configuration wizard.
  4. Follow this screen to connect the printer to your AT & T router.
  5. Once you have finished, reconnet the iPad to your router and check again.

  Please let me know if this can work.

  Shlomi

• Where to find the MAC address on a HP Deskjet F4580 wireless

  I inherited a HP Deskjet F4580 wireless capable. I tried installet to my wireless network; but my network in addition to WEP security also uses MAC address filtering. Where and how can I determine any address of the printer? There is no label or similar bodies with the number in this printer.

  Using Win XP Pro SP3. Any help will be much appreciated

  Hello

  Print a Network Setup page by following the steps below:

  1. Make sure that plain white paper is loaded in the product.

  2. On the control panel of the HP product, press and hold the Scan button ( ) for two seconds.

     The product prints the configuration page.

• Does anyone know how to use the HP Deskjet F4580 wireless printer

  Does anyone know how to use the HP Deskjet F4580 wireless printer

  Do you have a specific question or just general knowledge?

  The manual is available online here.

• DeskJet 3050 wireless printing

  I am using windows

  Is it possible to print to Deskjet 3050 wireless? No router?

  I wonder if it is possible to print wireless and have the printer to connect wirellessly to the laptop without going through a network (router).

  Currently I can fine prnt using the USB cable, but as for not using USB cable and wireless directly on the printer.

  I downloaded the manual and read it here...

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=SupportManual&prodTypeId=18972&prodSeriesId=4066450

  It supports no special printing, so not, you must use a router or a cable.

• Cannot scan Control Panel - printer HP Deskjet F4580 wireless

  1 - HP Deskjet F4580 wireless printer

  2 - Win 7 64 bit

  3. wireless printing works fine

  4. can not scan wireless for HP G72-B60US notebook

  5 used HP print & scan doctor 3.0

  6 - result - every thing goes out with your scanner click on the analysis test and it works

  7 - the doctor asks if you want to scan another and when I put a document or a picture in the printer it scans it into my computer the same as if it was the cable connected.

  8 - To scan the I used the Print and the Scan Doctor in this way.

  9 - I have tried all of the other HP diagnostics without result

  10. the CD that came with my printer is HP Deskjet F4500 series Version 14.1.0

  11. I can scan wireless using the doctor must be a software that I did not. Can anyone help?

  Well, I could have a better understanding now. Have you tried to scan from your computer through the software HP or MS Fax and Scan? Or the other of these programs should allow you to scan your computer through the interface you have installed wireless.

  Let me know and I'll get back to you as soon as POSSIBLE!

• Can't scan with a Deskjet 3050 wireless

  PC system: MB Pro 10.7 running

  Printers: Deskjet 3050 J610 HP inkjet driver 1.3.1

  IP address: 192.168.1.45

  Problem: Deskjet 3050 wireless more prints fine however when I want to scan it just happens to expire with the beachball o ' dead just spinning and spinning.

  I tried "Reset Printing System" remove and reinstall but same situation persists...

  Thanks in advance for any help you may be able to provide.

  OK, let's reset the printing system once more, restart the printer, the Mac and the router.

  If this does not work, there is no likey a software bug.  Let me know how it goes.

• Toshiba Software by disabling the automatic Wireless Configuration Service

  I have a problem with a Toshiba Satellite Pro laptop. When I start the system, the automatic Wireless Configuration Service is disabled and I have to go into Services and start physically whenever I start Windows (XP 32-bit sp3).

  I think it's own software of Toshiba (Q-Connect/Summit?) it prevents start automatically with Windows, because everything else is as it should be.

  Can you advise how to fix this so that the service always starts automatically and does not, during the trip, the settings for windows? Set up a wireless ad - hoc is quite difficult because there is no more headaches.

  See you soon,.

  John

  Hey Buddy,

  It s I don't know ConfigFree turns off this feature of Windows... As far as I know it s necessary service for all WLAN configuration tools

  Is manual start automatically, or simply the value type? You must assign it automatically.

  By the way: what laptop do you have?

• HP P1102w printer wakes up not after sleep (wireless configuration, win8)

  Bought this printer about a month ago.  I have no problem with two LAN + Wireless Configuration.

  Windows8 OS

  I noticed once the printer is not on (go to sleep), he wakes up not by himself.

  According to the manual, if I send a print job, he should wake up in itself.

  Currently, that's what I have to do.

  I need to physically turn off and turn on the printer, wait 10-15 seconds until the blue wifi light is solid (not blinking)

  and then send my print job, and it will work

  I was wondering if HP has a solution to this, thanks

  Hello

  Try to disable the auto power off feature and check if it can help you, the device should enter a power saving mode and not turn off completely:

  http://support.HP.com/us-en/document/c02860533

  If it does not help ensure the printer located near your router, but not less than 2 metres and check to see if that can help you.

  If there is still no change don't try to update the latest firmware and check if this can help you:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-115797-1&cc=us&DLC=en&LC=en&OS=219&product=4110396&sw_lang=

  Shlomi

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• Whenever I start the computer I lost the wireless capability. I get error WZC "871122". I then start the automatic Wireless Configuration service. Is there something I can do if I can't do it every time that this?

  Continually 871122 WZC error.

  Hi Shane,

  Looks like you have (or had) 3rd party software that previously managed your wireless connections, so casting service windows does not start automatically.

  See the following Article in the Microsoft KB, see if it suits it for you;

  http://support.Microsoft.com/default.aspx/KB/871122

  More precisely:

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and click OK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then click change settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then click apply.
  4. In the Service status area, click Start, and then click OK.

  Let me know how you go.

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)