Device Canoscan

Similar Questions

• hardware device canoscan lide 20/30, no puedo instalar el driver del device con sodware original.

  En a portatil not con windows7 no canon escaner puedo instalar el driver del device box para un. CanoScan LIDE 20/30.

  Por favor en Español answering machine. Salu2 thanks.

  Please repost the language Spanish, forum hardware and drivers.

  Por favor, reenviar has the lengua Española of material, y el foro drivers.

  http://answers.Microsoft.com/es-ES/Windows/Forum/Windows_7-Hardware?tab=unanswered

• Device CanoScan-al pinchar el secúndario in el icono botton not me appears las tasks... There is that?

  Al pinchar el secúndario in el icono CanoScan botton no appears las tasks...

  Hello
   
  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
   
  Thank you

• When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device. How can I work around this problem?

  When I try to scan with my CanoScan N640P ex scanner I receive a message indicating the Port to the printer that is used by another device.  How can I work around this problem?

  Hi ejp70,

  1. did you of recent changes on the computer?

  2. to when was the last time the scanner was working fine?

  3. you have any other printer\scanner connected to the computer?

  If you have any other printer\scanner connected to the computer, disconnect them and check if it works.

  I suggest that you uninstall and reinstall the scanner to the computer, also make sure that you install the latest drivers for scanner on Canon website.

• CanoScan 5600F Scanner appears as unknown in Device Manager

  I have a new CanoScan 5600F scanner which appears as unknown in Device Manager. I downloaded and installed the latest driver (several times) from Canon.

  • I tried the scanner on two PC running XP Home - a new Compaq Presario and a new Barebone VisonMan. It does not work on either.
  • I also tried the Epson scanners on both machines, and they don't work either.
  • However, when I run the Compaq Presario with Vista (which came with it), works to scan Canon. Problem is, I don't use Vista (or Win7) and I have no intention of.

  This seems to indicate that it is a problem with XP Home, do not recognize the scanner. I did not have this problem with any other USB device. Any suggestions?

  Thank you.

  Hello Onliner999,

  Thank you for your message.  I see that you have installed the correct drivers several times, checking with Canon, it seems that they have a new driver for your product that comes out on 10/26/2009.  Please try to download and install from the link below:
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=17142
  Please let us know if it did or did not resolve the issue.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Canon CanoScan LIDE 200 scanner not more known with the upgrade of the El Capitan

  Using my scanner USB Canon CanoScan LIDE 200 throughout the years that

  camera seems to no longer work after upgrading to El Capitan.

  The USB device ID is:

  Bus device 250 007: ID 04 a 9:1905 Canon, Inc. CanoScan LiDE 200

  
  

  What can I do to re - activate this device?

  Thanks for any help!

  Greetings

  ULI, DF4IAH

  Try VueScan http://www.hamrick.com/

• Canon CanoScan 8400F. No driver available.

  No driver available. Is there an updated driver for this device?

  Moved from feedback

  Original title: Canon CanoScan 8400F

  Hi Barbara Donaldson,.

  1. Which is exactly the problem that you are facing with CanoScan 8400F?
  2. What operating system is installed on the computer?

  CanoScan 8400F drivers are available for Windows go to this link.

  After the back if you have any questions.

• I can't find Canon, (canoscan LIDE25) on my list of scanners

  I can't find Canon, Canoscan LIDE25 on my list of scanners, difficulties to download the drivers for this device.

  also I have more Moose record for the scanner

  It worked before this computor, until I turned power off the POWER for a week then he's on vacation.

  I can't find Canon, Canoscan LIDE25 on my list of scanners, difficulties to download the drivers for this device.

  also I have more Moose record for the scanner

  It worked before this computor, until I turned power off the POWER for a week then he's on vacation.

  List of scanners.  Where are you looking?

  What problem you have download the driver or software of http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide25#DriversAndSoftware

• Problem with CanoScan Scanner

  Recently, I replaced a defective scanner with a scanner CanoScan LiDE 220. I use this with Dell desktop PC running VIsta 32 bit. The scanner is connected through a USB cable. I can scan pictures to my Adobe software, no problem, but am unable to scan documents and print directly on my Canon PIXMA iP4850-printer. When I use the scan on the scanner button, I get the message "CanoScan IJ Uitility Scan has stopped working". I tried to reinstall the driver software for the scanner and also driver software downloaded from Canon.

  Can someone advise?

  Canon says you could DO what you were trying to do (use it as a copier via your computer) with the current set of equipment?

  I mentioned it to uninstall all software for Canon because... If this system was installed with a different set of devices (especially since they were all same brand, Canon) front and work you desired (in this case a photocopier), you can get rid of all the evidence that for all the involved devices (printer included) and I could argue that even if the printer still prints It could be equally to blame in this way for the problem than anything else as a whole.   It is a full process (scan, pass through the computer and the printer drivers, print) and not only the new scanner.  A clean slate might give a better chance of getting this process at work - if he can.

  It is possible that Canon might be able to work with you for cleaning things so it works - it seems unlikely that it is a matter of 'firewall' any given track and the fact that you stated the Canon software crashes.

  I'm fair to assume that both are connected by USB only - no network cable (wired or wireless) between the computer and the printer device or a scanner?

• 64-bit driver for scanner Canon Canoscan 670u

  I recently bought a new computer with Windows 7. When you try to install my Canoscan 670u scanner, no TWAIN drivers were found. On this site I found and successfully installed a driver 64-bit for this scanner that someone else I work for the same scan in Windows 7: http://www.64bitdrivers.com/driver.php?id=1368
  I restarted with and without the scanner is plugged, but I always get the message that no driver is installed. In the device, clicking Properties, on the Canoscan Device Manager: the drivers for this device are not installed. (Code 28).
  Any help on how to proceed now would be much appreciated.

  Hi hmarcuse,.

  Your scanner is not compatible with Windows 7:

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20CanoScan%20N670U%2048Bit%20USB%20PC%2FMAC%20Scanner&v=Canon&uid=7103A002AA&pf=0&pi=9&c=Printers%20%26%20Scanners&sc=Scanners&os=64-bit

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Canon CanoScan 9900F flatbed USB Scanner to connect

  OT: Canon CanoScan 9900F flatbed USB Scanner
  You are looking for an application that someone may have created for this device and Windows 7 connect.

  Hi GaryDavisanswers,

  The following link shows that the CanoScan 9900F USB is not compatibile with windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=CanoScan%209900F&type=hardware

  I suggest you to install the drivers in compatibility mode.

  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the steps above fail, I suggest you to contact Canon for more support.

• Need a driver for CanoScan 9950F

  I have A CanoScan 9950F which is not compatible with my Windows 7 Premium Edition. The driver for a 32-bit system, new 64-bit system. No driver problem on the Canon site for this problem. Bright ideas out there?

  Get a device support.  If the manufacturer doesn't have 64-bit drivers, then no one else will, and if they offer compatible driver and no advice on what will work the other/other drivers, here again, no one else will have.

• Windows 7 Pro x 64. uninstall a bad driver or other software for a 600F Canoscan get this error message: "this program is for Intel 32-bit compatible platforms only.

  I have Windows 7 Professional x 64.  I'm trying to uninstall a bad driver or other software for CanoScan 600F Flatbed scanner.  When I try to, I get this message: "this program is for Intel 32-bit compatible platforms only.  The program will be left. »

  It is therefore impossible for me to uninstall.

  I downloaded the 64-bit driver appropriate and installed, but that did not help: Windows does not recognize the existence of the device.  I guess that, until the messed up bad software is uninstalled, I can't install things right.  I managed to uninstall the good driver, but the wrong software is still there.  It appears in the list of programs in the Control Panel, but can not be uninstalled.

  So, how one uninstall when this message?

  (signed) Dennis G Drury

  Thank you, Kevin.

  Dennis G Drury

• Scanner CanoScan 8400F cannot find the WIA driver in Win7 x 64

  Scanner CanoScan 8400F was working on win7 x 64 Home Premium Office.

  I use it every month. Last month it worked fine. Now stopped working - get message saying cannot find WIA driver. WIA service stisvc runs under services.

  I tried driver/software updates from Canon support - no help.

  Scanner works on laptop with win7 x 64 Professional with updated drivers/software.

  I think that the scanner is not serious, that desktop usb ports are in agreement, that support of Canon software is correct.

  What does not work in the operating system? Thank you.

  Pete

  PS. I've referenced the Community issue of MS at the following address, but cannot stop stisvc service to restart.

  Question

  trevor_914 asked on

  IAM having a problem set up a CanoScan 8400F scanner in Windows 7 (x 64). I get a message that I need a WIA driver. I can't find it on the Canon website. Help, please.

  I don't know what is a WIA driver. I have download3ed the driver Windows 7 (x 64) of the website of Canon, but the doews still scan does not work.
  • All the answers (1)
  

  Found this helpful 0

  Arya S Asok answered the

  Star of the community

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Method 1:
  You can download the firmware and the driver on the manufacturer's Web site.

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_8400f#DriversAndSoftware

  Method 2:
  You can try the following steps and check.
  a. go to Start and type Services.msc in search bar.
  b. search for WIA in the window and Double click and set it to started , if it is not.

  You can contact Canon support for assistance:

  http://www.USA.Canon.com/Cusa/support

  If you are always faced with the question, please respond with more information, and we will be happy to help you

  Hi Pete,.

  Were there any changes made on the computer before the show?

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Method 2:

  I suggest to uninstall the drivers for the device and then reinstall it by downloading manually from the Web site:

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_8400f#DriversAndSoftware

  Uninstall / reinstall the drivers scanner

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&cmd=VIEW_ARTICLE&article_id=39107

  Method 3:

  See the articles and check if that helps:

  Start the Service of WIA (Windows Image Acquisition) or Stimon

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&cmd=VIEW_ARTICLE&article_id=23117