Difference of ESXi hosts between analysis of updates and patches of scene

Similar Questions

• Is it possible to migrate ESXi host between data centers, if so please provide a brief not

  Hi friends,

  1. is it possible to migrate ESXi host between data centers, if so please provide a brief walking distance.

  2 can we perform vMotion and Storage vMotion while ESXi is turned on.

  3. is it possible to extend the VMDK disk while it integrates snapshots in it.

  Best regards,

  Sirot Vijay

  Yes the vmotion and svmotion works but one by one.

  1 - vmotion is posssible to power on State, but you can't svmotion the vm simultaneously. The storage will remain same

  2 svmotion is also possible to power on the State, but you cannot vmotion virtual machine simultaneously. the host will remain the same.

  3 vmotion and svmotion is possible together when the vm is off power. the host and storage can be changed simultaneously on this State.

• ESXi host goes to the State and the virtual machine does not restart on other host does not

  Hi all

  I'm looking for a solution, in which case the host goes to the State and the virtual machine on it does not restart on a different host (they'll just gray) does not not what could be the problem here and how to fix it

  later when the failed host returns upward machines either go to motor off the coast of the State, or they show that under tension

  While the host is down or not responding do not I am able to ping the host ESXi (5.5) and able to ping the default gateway and the DNS servers of the host itself

  Yes AF, the answer to all these questions is Yes, it is a HA and DRS cluster active, I tried restarting mgmt service, we use a shared storage (storage iSCSI HP 3PAR and left hand)

• Manager Update and patching ESX hosts

  We have 2.5u3 with ESX 3.5u2 VC.

  We want to use VMware Update Manager to patch the ESX host. I created a reference database containing patches ESX and attached to a host ESX to test. I have a scanner and it came with 28 patches that need to be installed, which is ESX update 1.

  Why would it need to install ESX 1 update when we already run ESX Update 2?

  No idea, or do I just exclude it?

  This is a bug of gui... it will not be applied.

  Duncan

  Blogs: http://www.yellow-bricks.com

  If you find this information useful, please give points to "correct" or "useful".

• Between the window update and Norton 360 first Edition.

  Since March 29, 2011 what a life Windows updates KB2505189 and KB2524375 were auto installed on my Windows Vista laptop, my Norton 360 first Edition will not perform live updates.  Is there a solution to this problem?

  Suggest you contact Norton Support on this issue: http://community.norton.com/t5/Norton-360/Norton-360-Support-Top-Issues/td-p/2934

• Windows XP updates and patches...

  I want to know when the support and the release of the XP operating system patches is going to end. I was able to find a date for Support extended until 2014, is that correct?

  Security updates will be posted on the Microsoft Update Web site for the general public and the Extended Support phase.

• I do neeed to keep the security updates and patches in my program manager? There are many of them.

  I have WIndows XP.

  See this discussion: http://aumha.net/viewtopic.php?f=62&t=33827 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When is it safe to remove the old updates and patches recover disk space?

  I have a LONG list of updates from windows to windows xp, Media Player, microsoft, etc. in a way at the time where I got first computer and set on automatic updates. I'm sure that they consume valuable disk space but how do I know which ones can be deleted without problem?

  Never. If you remove them, it defeats the purpose of the patch/security updates. Your calculation returns to a previous state vulnerable.

  If you need space, get an external hard drive for all of your data.

• Windows 8 updates and patches manually.

  I have lot of new computers with windows 8 is installed. Now I want to uptade all computers, but it will take a lot of bandwidth. Is it possible to download the update manually on the hard disk, and then update all of this storage instead of update all computers individually from the internet

  If you can check the number of the required update, they can then be downloaded manually from the Microsoft Update Catalog.

  http://catalog.update.Microsoft.com/v7/site/thanks.aspx?ID=140

  If you are a type of field of work then watch WSUS

  Windows Server Update Services

  http://TechNet.Microsoft.com/en-AU/WindowsServer/bb332157.aspx

  An update to Windows Server Update Services 3.0 Service Pack 2 is available (KB2734608)

  http://support.Microsoft.com/kb/2734608

• Update and patching ESX 3.5.0

  What is the best way to update a standalone ESX Server 3.5. We normally do our updates through VC but this server is standalone and is not managed by VC. Download the latest update from the VMWare Web site and what is the best way to install updates?

  Thank you

  The best way is to connect ESX to VC and use the Update Manager.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• SP3 updates and patches

  What does SP3 fixes related to Microsoft Office 2007?

  http://support.Microsoft.com/kb/2526086

  Overview of improvements after SP3 Office 2007

  • Documents requiring a custom security trimmer are not returned by alert search queries, even if the user who created the alert could see and search these documents.
  • The characters non-Unicode in certain error message strings now correctly view.
  • Four new bibliography styles are now available in the feature "Word citation and bibliography": Harvard Anglia, IEEE, sixth edition APA and MLA seventh edition.
  • The Chinese new year holiday is now included in the calendar in Outlook for Singapore.
  • Resolves an issue in which Excel 2007 crashes sometimes when you open an Excel workbook that is saved in a newer version of Excel previously. This occurs if the file uses a new feature that is not available in the Office system 2007.
  • Solves problems with the rules of pre and Post reform in the French thesaurus.
  • Resolves a problem in which encryption settings are not configurable when used with a converter pack compatibility file format and Office 2003 or an earlier version of Office.
  • Resolves an issue in which an incident sometimes happens when an Excel workbook is open in Excel, and then presented a preview using the preview pane in Windows Explorer.
  • Resolves a problem in which Excel Slicers and Ribbon customizations are lost when a XLSX file is first recorded as ODS file and then saved as a file XLSX in Excel 2007.

• Update Server VC and 5.5 ESXi hosts to update 3 b (Build 3248547)

  I'm in vCenter Server 5.5 and 5.5 ESXi hosts.  Both are updated 3A, patched to version 201510001, which is the build 3116895.  I plan the upgrade of update 3 b (Build 3248547) and I'm a little confused on the question of SSLv3.

  I wonder if this point below ESXi55 U3b & VC 55U3b Known Issues applies to my config:

  ESXi does not automatically added to the inventory of the vCenter servers
  If you install an earlier version of vCenter Server and vSphere Update Manager for ESXi 5.5 updated 3B, then after the task of sanitation, ESXi does not automatically added to the VC inventory. Remediation process never gets done and ESXi State of connection in the VC inventory is presented as disconnected. Solution: When you restart ESXi after reorganization process is started, enable SSLv3 on ESXi (which is disabled by default). This will ensure that ESXi is added to the VC inventory automatically in minutes and sanitation as completed.

  If I'm reading things correctly, upgrade to vCenter Server to 3 b first and then upgrade the ESXi hosts, will avoid lost communication problems.  Can anyone confirm?

  It should be good if you update vCenter first.

  The problem is that pre - U3b vCenter 5.5 forces an SSLv3 connection when connecting to an ESXi host on port 443 (not the reverse). It does this, even if the host ESXi and vCenter SSL/TLS libraries actually support TLS 1.0 + since at least vSphere 4.0.

  So when you update one host to 5.5 U3b, the oldest vCenter again will try to force a connection SSLv3 that will fail, since SSLv3 has been disabled to the host. If you're updating vCenter, first of all, it will initiate a good TLS 1.0 + connection to more similar and updated hosts.

  Here is an explanation of the (pre - U3b) vCenter SSLv3 handshake behavior:

  Re: vCenter and host communication SSL v3

• Upgrade 5.0 ESXi host w / vCenter on it

  Hi people, forgive me if this isn't in the right place. Finally move the update and patches of my three hosts ESXi 5.0 with Update Manager. I was quite easily able to update two of my guests with managers to upgrade to a more recent version, however puzzled on what to do with the host that hosts my vCenter on that server? We have VMware essentials if we do not have to use Vmotion. Is there an easy way to update this host without vCenter cloning and move to another host to update? Advice or tips or news to point me in the right direction would be greatly appreciated. Thank you in advance for your time and help!

  I guess your vCenter is on the shared storage - connect to the host of your power VM vCenter down the VM and remove from the inventory of the hosts - go to one of the hosts that has been already updated and add the virtual machine to inventory and run it - and now, you're ready to use the Update Manager to update host rest.

• Adding secondary management NIC to ESXi host

  Hello

  We currently have a customer demand to add secondary management NIC to the ESXi servers ourselves and the client can connect to hosts if vCenter becomes unavailable.

  Is someone can confirm if it is feasible or will host blend and become inaccessible? Sorry if this is an obvious answer, it's just that I have never seen configuration with management NIC

  Thanks in advance.

  We currently have a customer demand to add secondary management NIC to the ESXi servers ourselves and the client can connect to hosts if vCenter becomes unavailable.

  Can clarify you what exactly you mean by that? A single management interface are accessible by some many different clients, as long as it is accessible. Are there limits where the client manages the ESXi host from an internal network and you need to access externally via public IP, another for networking?

  In this case your would create a management interface 2nd vmkernel on the external network and to face together the default route of the external gateway routing and insert static routes for the internal network using the internal network gateway. So basically the same thing you would do to any IP multi-hosted system.

• Change the password for root to an ESXi host

  Hello

  I need help to get a script VCO that change password for root to an ESXi host.

  In PowerCLI is the Set-VMHostAccount cmdlet. I searched in VCO API... I have not found or something similar.

  I found the object of VcHostAccountSpec but seems it only works with "Host Profiles" and my licenses are Standard and Enterprise.

  http://www.VMware.com/support/Orchestrator/doc/vco_vsphere51_api/HTML/VcHostAccountSpec.html

  Any idea?

  Thanks, Roberto

  Another option would be to connect to the ESXi host with vCO plugin SSH and run the command "passwd" remotely. Haven't tried, but in theory, it should work.

  @Tim - we try to keep the compatibility of the existing whenever possible plug-ins vCO so PowerShell module should work with the latest vCO relies.