Applications suddenly not recognized

Similar Questions

• Digital camera is suddenly not recognized by computer

  Digital camera suddenly not being recognized by the computer after a year, works perfectly, so I can now download my photos. I tried to reinstall the software of the camera, but says it's already there - not good.  What can I do?  If I need to uninstall the software and reinstall it, please tell me how to do it.  Thank you

  Go to the website of the manufacturer of the camera to get instructions to uninstal/reinatll software for their product.

  Or read this:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/uninstall-or-change-a-program

  Uninstall or change a program

  If the above does not solve it:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Ports USB suddenly not recognized

  I have a laptop with windows Vista on it and it came with 3 USB ports.  After doing some cleanup, defrag and that you back up all of a sudden none of them are recognized.  They appear in the Device Manager but not in the "computer" section  The wireless mouse does not work and our Ipod is not recognized, although it will load.  We did all kinds of update.  Have not uninstalled and reinstalled material... bit nervous about it and don't really know how to do it.  Good instructions on how to do it would be useful if that's what we need to do.  What should we do?

  Any help is appreciated.

  Hello

  Try a system restore to where the USB ports worked.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ===================================

  If necessary:

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  For a laptop, using a real computer shop (no leeks and glances at a Best Buy or any other
  Department stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Portege R700 Finger Print Reader suddenly not recognized OS

  Hello

  I've been looking for a solution

  My R700 on Win7 worked perfectly using the finger print scanner. At any given time without cause the
  hardware (fingerprint reader to log on) was not recognized by the operating system more.

  -J' tried to remove the software, reinstalled driver
  -updated it and so on resulting material was not found.
  -J' even deleted all the entries in the register - no go.

  -Finger Print genuine software starts, but only to give an error that the FP-reader is not present.

  Is there a way to remove the fingerprint stored manually by removing the manually.

  The equipment works according to the support. (The machine has been send)
  However I don't want to re-setup of the entire machine (it is a work laptop) just to make it work?

  Intro step by step to achieve this or advice?

  I couldn't find a description on how to manually remove fingerprints (cause I suspect this is the problem) from the software to do this does not start.

  Any input would be appreciated.

  Best regards
  Julian

  If you do not see material unresolved fingerprints or devices in Device Manager, then the device is either disabled in the BIOS or the fingerprint sensor is defective or too loose or there is a spill of liquid causing corrosion.

• USB drives suddenly not recognized by Vista 64 SP2

  2 USB drives that work on another machine to Vista (32-bit) are not recognized and do not appear in my computer, but appear in 'remove hardware safely '. These USB drives has worked in my computer up to a week or 2 ago.
  When the disks are inserted a new item will appear in device ("storage volume") Manager who has a subelement ('generic volume') which has a yellow "!" which indicates a bad driver.
  The readers appear in disk management, but any attempt to change the drive letter or view properties gives an error "operation has not completed.
  Try to reinstall the drivers results in a message that the drivers are current, but the problem persists

  Hello

  Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
  more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
  C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
  If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
  and if doesn't work does not correctly return to this step.

  Check again once you advance through them.

  2nd check these:

  Operating instructions: find 'lost' Windows Vista drivers when you add a new device
  http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  -------------------------------------------------------------

  If no joy:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  --------------------------------------------------------------------
  Check this box:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
  drive letter assigned is not the one you used to see. This may show of course not the
  Road at all, it's just a check.

  -------------------------------------------------------------------
  http://www.Uwe-Sieber.de/usbdlm_e.html
  Its complex however, the site has a lot of help.

  And all this?

  See also this thread and those it refers too.
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• D230 JVC DV camcorder suddenly not recognized by the computer

  I have a JVC D230 DV camcorder. I have had it for several years and have never had a problem connecting to my computer. Yesterday, I tried to connect the camera to my computer via USB. The computer does not recognize the camera. In a few moments, a message appeared on the screen that a new JVC driver had to be downloaded and installed, and that the camera wouldn't work if it was done. I downloaded and installed the driver. The computer still does not recognize the camera. I contacted JVC. The answer was the following: "JVC does not all drivers for Windows Vista." They suggested that my problem is caused by a Windows Update. I would like to know if something is known on this problem. It seems unlikely that I am the only person suddenly unable to download videos and images from a camera to a computer. The last time that I downloaded from my camera to my computer was in May. I have not had any trouble.

  Thank you.

  JVC advised me to connect the camera to the computer with a firewire cable that this connection uses no drivers.  Fortunately, it worked.  Thank you for the help and advice you gave me.

• CD/DVD drive suddenly not recognized - under Vista Ultimate.

  I have a HP Pavilion running Vista Ultimate.  Recently it stopped recognizing my cd/dvd drive.  The regedit procedure does not help, because I have no UpperFilter registry entry.  Where should I go next?  Is there a link that will take me to more useful information?  I don't know how to get instructions for regedit go to "next steps". Thank you!

  What is the link you are looking for?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

• Sony Walkman device is suddenly not recognized in Windows 7

  Windows 7 has stopped recognizing my Sony Walkman NWZ - E438F Media Player since the last update. Do you have a system restore, and it did not help. Restored the walkman to the factory settings, and that did not help either.

  The walkman works fine on another computer. I tried all my usb ports - and ports all work with other devices, but do not recognize that there is an external device connected, when I try the walkman. I get power from the usb connection, however.

  Hello

  Download and install the latest firmware for your drive and check if this solves the software.

  See this link:
  http://eSupport.Sony.com/CA/Perl/support-info.pl?info_id=569&MDL=NWZE438F

  Also, download the latest version of the software from the below link:
  http://eSupport.Sony.com/CA/Perl/SWU-list.pl?MDL=NWZE438F&SelectOS=44

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Why Windows Media Player suddenly not recognized my portable device even if the device is connected and is displayed in my computer?

  Until a week ago, Windows Media Player and my portable device of Sanza fuse got along beautifully when sudden WMP ceased to recognize the device.  This despite the fact that the Sanza is correctly connected and appears in the personal devices from my computer.  The Sanza even shows on its screen that is connected, but it's like OMP no longer sees it? Any thoughts? This who could I have inadvertently done to cause this painful ' divorce? Thanks for any help.

  Hi Cynthia,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem with Windows Media Player.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. are you able to play other files using Windows Media Player?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter in Windows Media Player and check if that helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  Try to uninstall and reinstall Windows Media player from Windows features and check if it helps.

  Enable or disable Windows features: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Epson stylus photo rx700 scanner suddenly not recognized as on the what it is.

  Hi, I used the all scanner part in one printer on August 13, 2013 with epson scan program. Everything has worked perfectly as usual.
  The next morning, I tried to scan a document and got a message saying scanner not available.
  I tried all the troubleshooters, but which did not help. I downloaded and installed the latest programs and drivers from epson usa. (Epson uk is convinced the printer no longer exists, but they still sell cartridges for it.) the scanner was still reported as only unavailable. When I double click on the printer in devices and printers, and then select scan a document this message to the top pos ' operation could not be completed error 0 x 00000015 device is not ready ".

  Finally I tried on my linux OS and the printer and the scanner works properly.

  I also tried on my Windows7 laptop with the same results as my main PC Windows7.

  I have not installed all the programs etc. Since the last scanner was working.

  I don't know if it's relevant or not, but at the same time, I noticed that Web links of emails or my office and dialogs in browsers no longer work. Some I have no message, they work not and a few others, I'm getting "problem with shortcut. Unable to open this Internet shortcut. The Protocol "http" does not have a registered program"this happens also on the laptop.

  I have ladies of viruses and malware on computers as well as firewalls. I also did a full scan at the same time and both reports were clean.

  Thank you

  Hi Frederic,.

  I suggest you try the solutions provided by Meghmala in the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/operation-could-not-be-completed-error-0x00000015/68244f52-B556-4b83-a9c9-926dc9098ae7

  It will be useful.

• BlackBerry Smartphones BB suddenly not recognized by Mac

  No problem until today.  Have not changed anything. So why do we say not connected BB. Thank you

  Thanks for the reply fast trustdiva.

  Mass storage mode, the PC/Mac to access internal and external memory on the BlackBerry.

  Just a basic question have you tried to remove the battery and place it back in and then try to connect to the Mac?

  If no luck, go to Options > Media Card on BlackBerry and make sure that MTP Protocol is set to off and mass storage mode is on auto enable mass storage when connected is set to Yes.

  Then try to connect the BlackBerry to the Mac.

  Also do you have a previous synchronization software on the BlackBerry?

  I look forward to your reply.

• my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba, to no avail.

  my webcam application does not work on my windows 7. It has suddenly stopped working. I tried to install the drivers of webcam from the websites of toshiba. but after downloading the drivers, when I run the winrar files, he said inexecutionable. Please help.also when I run the compatibility of the test program, it says the webcam application or incompatible, even if it worked very well earlier.

  See the help/support site Tosh or their forums.

  Have you recently updated of your drivers from somwhere system other than Tosh site or installed any new programs or perform any maintenance operation.

  Program compatibility test cannot be invoked

• Reinstalled creative cloud desktop application - bought now membership is not recognized

  As my desktop creative cloud app did not work properly at all, I had to reinstall the whole package again. Now I'm stuck with the question that members filed under my ID is not recognized. I am slighltly devastated right now and don't know what to do... any help is very appreciated because I need to work on my indesign files to work!

  Thank you very much in advance!

  Hello

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  However, the Adobe Id on the forums shows no active license under it. Have you been licensed?

  Kind regards

  Sheena

• CD/DVD drive not recognized by Windows all of a sudden

  The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.

  Hi Ranamaska,

  You can follow this link & check if the problem persists:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?

  Hope the helps of information.

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).