Similar Questions

• vCloud transfer server storage

  I am trying redhat vCloud 5.1on installation and I followed the installation guide. But at the next section:

  vCloud transfer server storage

  To provide storage temporary for uploads and downloads, a NFS or another volume of shared storage must be accessible to all the servers in a vCloud Director
  

  cluster. This volume must have permissions writable by root. Each host must turn up the volume in $VCLOUD_HOME / / data transfer, usually/opt/vmware/vcloud-director/data/transfer. Uploads and downloads are the storage for a few hours a day. Pictures transferred
  

  can be large, so allow at least several hundred gigabytes to this volume.

  I'm bit confused about the wording, I guess that saying I need an NFS volume to go up to my cell vCloud. Future vCloud cells that I add to this group will have to mount this volume share the same NFS mount point?

  The host ESXi has access to this volume NFS as in the guide there is no 'a NFS or another volume of shared storage must be accessible to all the servers in a vCloud Director ' or it means just cells vcloud?

  If I only plan to have a vCloud cell do I need an NFS Volume or could just use local storage?

  I'm bit confused about the wording, I guess that saying I need an NFS volume to go up to my cell vCloud. Future vCloud cells that I add to this group will have to mount this volume share the same NFS mount point?

  -Yes, this "transfer file" is somewhat like a shared drive between all THE cells of vCloud Director to a given instgallation.

  The host ESXi has access to this volume NFS as in the guide there is no 'a NFS or another volume of shared storage must be accessible to all the servers in a vCloud Director ' or it means just cells vcloud?

  -Yes... only the cells... ESXi does not mount this at all.

  If I only plan to have a vCloud cell do I need an NFS Volume or could just use local storage?

  -You can use the local storage, but if you want a second cell to fail on... it'll be a bit of a pain to install later.  I recommend this for a test environment.

• The deployment of flex in web server

  Hello.

  IM newbie flex developer and im having problem to deploy my web server project.

  Hello

  If your use of the linux server and then see the path below

  for example, this is my path "/ home/xyz/public_html ' in this folder, you must keep your application and zend framework and when your server downloaded on forget the folder bin-debug ok run your html file in the bin-release folder and file amfconfig see above example guy

  [zend]
  ; define the absolute path to the webroot directory, example:
  ; Windows: C:\apache\www
  ; MAC/UNIX: / user/apache/www
  ; Webroot = / var/www/html
  Webroot = / home/xyz/public_html / / / change webroot in your path of the web server.

  ; define the absolute path to the zend installation directory, example:
  ; Windows: C:\apache\PHPFrameworks\ZendFramework\library
  ; MAC/UNIX: / user/apache/PHPFrameworks/ZendFramework/library
  ; zend_path =

  [zendamf]
  AMF.production = false
  AMF. Directories [] = your application folder name/bin-debug/services / / put the name of your application.

  This may solve your problem.

  make this change in bin-release amfconfig also and bin-debug also

  and finally run your application from the bin-release record.

  Kind regards

  Gallot

• Setting up a Dreamweaver Site with directories outside the Web root

  I have my web server, the following web site structure:
  
  \WebSite\ wwwbeta.evansville.edu D:\
  \Extensions\CustomTags\ wwwbeta.evansville.edu D:\
  \Extensions\Components\ wwwbeta.evansville.edu D:\
  \Extensions\Includes\ wwwbeta.evansville.edu D:\
  
  The web site in the web server root, is mapped to "D:\ wwwbeta.evansville.edu \WebSite\.
  The other three directories of "Extensions" are accessible only by ColdFusion and should stay outside the web root. However, I want to be able to edit these directories in DW, as well.
  
  In Dreamweaver, I have the local root folder defined on C:\WebSites\ wwwbeta.evansville.edu.
  The HTTP address is on http://wwwbeta.evansville.edu/
  
  However, these settings just don't jive during the insertion of links. (I don't want to use relative links. We only use absolute links).
  
  When I insert a link, it will as long as "/ WebSite/Link.cfm. I understand very well why this is happening. However, I am looking for suggestions on how to configure DW, if possible, for me to work with all of these directories, in a unique site of DW definition, generating yet correct absolute links.
  
  I don't think that this is possible. Please show me the light.
  
  Thank you!

  > However, these settings just don't jive during the insertion of links. (I don't want to
  > use relative links. We only use absolute links).
  >
  > When I insert a link, it will as long as "/ WebSite/Link.cfm.

  It is a relative path, a relative path root site.

  because you chose a folder which is a folder of level higher than we should
  for the record of Site Local to this site, dw made the wrong way.

  There was not anyway you want.
  Set the Site Local folder to
  \WebSite\ wwwbeta.evansville.edu D:\

  and dw will properly the root of the relative site or document relative paths for
  the main site folder

  You will not be able to touch anything in these other folders with dw, because
  they are out of the structure of the site.

  You can define a new site for each of the other files, and then you could
  have dw make correct paths when working on includes, for example.

  As far as I KNOW, you can't do it with a single site def.

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• Problem with URL localhost Web Server page

  I can not open my Web server via the browser page, but he had a different address when I click it?

  When I click on it it gives me:

  file:///applications/XAMPP/xamppfiles/htdocs/mytestwebsite%20/index.htm

  If I want to open it, it should be sufficient to write:

  localhost/mytestwebserver/index.htm

  or should I write more about after "localhost".

  Thank you

  You named your file mytestwebsite with space at the end which turns into URI mytestwebsite % 20. You must delete the space between the name of the folder or try to use localhost/mytestwebserver%20/index.htm or create the virtual host.

• He was somehow set up my own Web server?

  Hello community

  I'm new in Web site development and I run a website called www.resthouse-wallis.com.

  In fact, I can't run the Web site and I think that's not because of my hosting.

  It is possible that with some changes in the Terminal (nginx, apache) that I am my own Web server running and have not configured it well?

  Or is it possible that my hacked site?

  One of my friends passed some photos through net2ftp.com

  I'm really a new developer mac and need help to find the problem.

  What does "I can't launch the website" mean exactly?

  Can not go you on a browser?

  What happens when you try?

  It worked before?

  FYI, the URL works fine for me, holiday home in the Canton of Valais.

  OS X includes the Apache 2 web server that you can activate at any time. However this would be a web server local, and except if you have configured your router is not available outside your own network.

  It has nothing to do with your site hosted elsewhere to have a local Web server.

  Any Web site can be hacked, the real question is why would anyone?    It takes time and effort to hack a site, and it usually requires a goal, the goal or the recovery. Why someone would want to hack into your Web site, and would be someone who takes the time to make it known?

• HP z6100: HP z6100 - HOW TO RESET IP ADDRESS to PRINT VIA WEB SERVER?

  I bought two designjet z6100 printers.  I sold the first one I had running through the web server.  I had the same problem with the first, but someone talked me through how to give the printer a new IP because I could not access it through the current on the printer.

  I need someone to talk to me through this again.  I do not have the person who helped me, but coordinated.

  Help, please.

  Hello

  Since the Web server, you can change the DHCP form manual, but cannot reset.

  If you want to do a reset, you can get to the front of the printer.

  Go to the connectivity > Gigabit Ethernet > Advance > reset

• Designjet t520: designjet t520 default login and password for web server

  Hello!

  Which is the default login and password for the web server and how to reset the password?

  Hello
  
  As mention Rashed, there is no password to the factory.
  
  Try a Restore Factory Settings.
  
  If this does not work, go to the Help Menu and do a Soft Reset. (Don't do the hard reset).
  
  For access to the support menu press on and hold the power button for 15 seconds, or at the home screen tap home, back, home, home.
  
  Concerning
  
  Mike

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• Integrated Web Server Setup for Linux

  HP 8100 on USB, but I would like to print wireless from Tablet (Nexus-7). There seems to be no way to access the essential EWS from a Linux system. Are there opportunities that I missed something?

  Hi IanSinclair

  I understand that you want to configure the printer on the wireless network.
  
  
  
  Here is the url for the drivers Linux configure the wireless on Linux first.
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2020 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5218794 #n181
  
  
  
  Connect the printer with the ethernet cable to the router to get the ip address.
  
  
  
  Here's a url on how to print the configuration page.
  
  http://support.HP.com/us-en/document/c02871800
  
  
  
  You can then configure the printer through the integrated wireless network Web server. Type the ip address from report access SAP configuration and configure the wireless. Be sure to disconnect the cable after the settings app.

  Once the printer on the network the Nexus-7 should be able to connect successfully.
  
  
  
  I hope this helps.

• Digital fax put in place in the web server integrated shows "invalid entry".

  I have an officejet Pro 8600 more than we use fax digital network folder option with.  Our installation worked fine for several months and the other day I noticed that we receive no faxes in the network folder.  I go through the installer with the built-in web server, and when I save and test I get an error of "invalid entry".  Technical support has been absolutely no help.  Hoping that someone out there has an idea that might work.  To make matters worse, when I turn off the digital fax I get is even more print faxes.  They just disappear! Any help is appreciated.

  Hello

  In Internet Explorer, open the built-in web server, click the ALT key and then click on tools on the main menu.

  Click compatibility view settings, and then click the Add button.

  Click Close, and then follow the fax to electronic-mail/network folder option.

  You can see any difference?

• OSX web server does not

  I just got a new MacBook Pro with the retina display, which should take the place of my old MacBook 2010.

  (Old and new) running OSX 10.11.1 (El Capitan). I've initialized a new transfer of the former.

  Everything seems to work properly, but the web server.

  I have my html documents in the WebServer directory, just like in my old MacBook.

  The file /etc/apache2/httpd.conf points to the right folder: DocumentRoot "/ Library/WebServer/Documents".

  In system/sharing preferences, internet sharing is checked.

  I tried to manually activate the apache: sudo apachectl start.

  But the result is that, when I try to open a local web page: http://localhost, respone is:

  Safari cannot connect to the server - server 'localhost' is not found.

  Any suggestions?

  Luigi Fonti

  In system/sharing preferences, internet sharing is checked.

  This isn't what you think it is. Please, turn off the power.

  There is no user interface on the web server in El Capitan. You will need to either use OS X Server or an application to activate it, or else create a proper launchd job to run it.

• Not possible to activate the scripts on the Web server

  Hello

  I would like to create a page .html for Web with a bit of scripting ESP included - Services because now I understand just this:

  <% for (i=0; i<3; i++) {
    ...some text...
   } %>

  According to this document NOR, I first need to enable scripting:

  To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.

  I activated the Web server and it works OK. But there is nothing called "Scripting" in the configuration page - and the script is executed (the code is just printed in the form of simple text).

  Anyone know how to activate the ESP script?

  Version: LV 2012.

  Best regards, Jan

  Hi Jan,

  In fact, you use the ESP file instead of a static HTML file.  For example, if we had the static html file:

  Hello world

  This file can be located at something like /MyWebService/HelloWorld.html.

  If I then do something like have a page to say "Hello, Jan" or "Hello, Mark" I could use ESP.  In this case, your code might look like:

  <>

  var xname = form ['name'];

  %>

  Hello, @@xname

  The URL of such a web method is perhaps something like jan/MyWebService/Hellovar/Jan where Jan string literal passed to the terminal of a web method that can resemble

  

  In this example, the string "Jan" is passed to the terminal of the value of the VI.  What implementation of the Web method in the spec to build his signature might look like in /Hellovar /: value.

  So, back to your original question.  You embed not ESP breast and the HTML document.  Instead, you embed HTML inside a document of ESP and the rendering of the document in HTML format when accessing the URL of the Web method.  While the paper you mentioned earlier has an example project in that you can use as a reference

• Info general solution on Internet interface with active web server on microcontroller (Ethernet)

  My intention is to have the on-Board Unit (ATMEGA32) located in a remote place, somewhere over the internet (connected via Ethernet) connected (via CANBUS) for the fuel cell system for the measurement data (current and the temperature of the fuel cell).
  The end user and/or client must be able to display these data acquired via the browser on the internet. The main objective of this project is to prevent any pc dedicated as a simple web server, so I would like to know your general solutions.
  (I noticed that I can't impelent a web server on this microcontroller, but how do I set the GUI to display data on the browser for users?-I want to say I'm not accurate if the designed GUI (LabVIEW or c SHARP) must be in the internet (solution host & domain) or there are better solutions for her.)

  If you have a solution for the web server on the microcontroller and are convinced that architecture will work, it seems that your question is how to write a client for data.

  Some of the things you're talking about sounds like you want the web server on the microcontroller to respond to a fully functional GUI to any client. This may not be practical because of the computing power limited on the microcontroller and the difficulty of setting up and maintaining this type of server in a microcontroller environment.

  A more common architecture that I've seen is just to serve the raw data and let the client user to interpret the data and display them as graphics, etc., this means that the user must Access the microcontroller of a computer running a client that you make.

  You can use the communication/protocols/http client in labview palette or you can write a c# client that it is really a question of what data you need to acquire, and what language you are most comfortable in.

• NEITHER Application Web server refuses to be activated

  I am trying to deploy a web service in LabVIEW 2010 and it fails to deploy in saying that the Web of Application service OR work...

  If I connect to http://localhost:3580, log in as Admin (empty password) and click on the page of web servers. I put the server to Application Web 8080 port, click on the check box turn on... then click apply - and the only thing that happens is that the browser displays the error on the page symbol in the status bar... There is not 'yes', showing next to the Enable checkbox for the web server of the system...

  So - if I start again from zero and do the same thing, but also click the 32-bit option button before hitting the button apply - what is happening? Well, I get an error dialog box:

  

  The service itself (32-bit, 64-bit is registered but not also started) runs according to the services control panel...

  I'm stuck... If anyone knows what is missing here, is there something I am doing wrong, or something that must be done before activating the application service?

  Uninstalling and reinstalling 32-bit LabVIEW 2010 on two different computers revealed that the problem appeared only on my Vista 64 bits - not the Windows 7 32-bit macine macine...

  By looking at the services that are running on the machine with the problem that I could see that he was running the 32-bit version of the application Web server, had a 64-bit installed but disabled--but--only the latter has been fixed to depend on the Web Server service of NOR. This seemed a bit strange that the 32-bit version on the 32-bit computer was dependent on the Web server of OR...

  So - I disabled the 32 bit Server Web Application service OR, turned on the 64-bit... and - I am now able to configure the Web application server to start.

  Why so the 32 and 64-bit application Web services installed, with only 32 bit one running-, but not properly? This happens to everyone, but everyone arranges it by opting for the 64-bit version... or is there something that causes the installation get messed up?