Display gridlines in the table on the screen

Similar Questions

• When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes

  When I try to "save under" I get a message "Initalising the root folders to display" and then the screen freezes. Sometimes when I click several times on the target folder it opens other times it does not. Any thoughts?

  Hello

  You try to save files using Microsoft office?

  If so, this article should help you

  The program stops responding when you try to open or to save a file in an Office 2002 program, in an Office 2003 program, in a 2007 Office program or in a program Office 2010

  http://support.Microsoft.com/kb/313937

  If its with a different program and then check if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  Step a. refer to the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to display data on the screen and save the data in a file at the same time?

  The code can display acceleration on the screen of the playbook.

  But, when fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ") runs, debug displays no source available.

  ??

  Does anyone know how to solve the problem, which writes data to a file?

  The code is below.

  /*
  * Copyright (c) 2011 Research In Motion Limited.
  *
  Licensed under the Apache License, Version 2.0 (the "license");
  * You may not use this file except in compliance with the license.
  * You can get a copy of the license at
  *
  www.Apache.org/licenses/license-2.0
  *
  * Unless required by the applicable law or agreement written, software
  * distributed under the license is distributed on an "AS IS" BASIS.
  * WITHOUT WARRANTIES OR CONDITIONS of ANY KIND, express or implied.
  * See the license for the specific language governing permissions and
  * limitations under the license.
  */

  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include

  /**
  The milliseconds between the accelerometer readings. It's the same thing
  * rate in which the accelerometer data will be updated
  * material. The update of material rate is below to help
  * accelerometer_set_update_frequency (FREQ_40_HZ).
  */
  public static const int ACCELEROMETER_MAX_POLL_INTERVAL = 25;

  public static screen_context_t screen_ctx;
  public static screen_window_t screen_win;
  dialog_instance_t main_dialog = 0;

  paused int = 0;

  The forces of the accelerometer
  float force_x, force_y, force_z;

  file elements
  int _logcounter = 0;
  FullName Char [256];
  FILE * f;

  /**
  * Use the PID to set the id of Group window.
  */
  public static char
  get_window_group_id()
  {
  public static char s_window_group_id [16] = "";
  If (s_window_group_id [0] == '\0') {}
  snprintf (s_window_group_id, sizeof (s_window_group_id), "%d", getpid());
  }
  Return s_window_group_id;
  }

  /**
  * Set up a basic screen, so that the browser will be
  * Send window state events when the State of the window changes.
  *
  * @return @c EXIT_SUCCESS or EXIT_FAILURE @c
  */
  public static int
  setup_screen()
  {
  If (screen_create_context (& screen_ctx, SCREEN_APPLICATION_CONTEXT)! = 0) {}
  Return EXIT_FAILURE;
  }
  If (screen_create_window (& screen_win, screen_ctx)! = 0) {}
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }
  use of int = SCREEN_USAGE_NATIVE;
  If (screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_USAGE, & use)! = 0) goto fail;
  If (screen_create_window_buffers (screen_win, 1)! = 0) goto fail;
  If (screen_create_window_group (screen_win, get_window_group_id())! = 0) goto fail;
  buff screen_buffer_t;
  If (screen_get_window_property_pv (screen_win, SCREEN_PROPERTY_RENDER_BUFFERS, (void *) & buff)! = 0) goto fail;
  buffer_size int [2];
  If (screen_get_buffer_property_iv (buff, SCREEN_PROPERTY_BUFFER_SIZE, buffer_size)! = 0) goto fail;
  int attributes [1] = {SCREEN_BLIT_END};
  If (screen_fill (screen_ctx, chamois, attributes)! = 0) goto fail;
  int dirty_rects [4] = {0, 0, buffer_size [0], buffer_size [1]};
  If (screen_post_window (screen_win, buff, 1, (const int *) dirty_rects, 0)! = 0) goto fail;
  Return EXIT_SUCCESS;
  in case of failure:
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }

  /**
  * Rotates the screen at the specified angle.
  *
  @param angle angle to rotate the screen.  Must be 0, 90, 180 or 270.
  *
  * @return @c EXIT_SUCCESS on success, to another @c EXIT_FAILURE
  */
  public static int
  rotate_screen (int angle)
  {
  If ((angle! = 0) & (angle! = 90) & (angle! = 180) & (angle! = 270)) {}
  fprintf (stderr, "Invalid Angle\n");
  Return EXIT_FAILURE;
  }
  int rc;
  int rotation;
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, & rotation);
  If (rc! = 0) {}
  fprintf (stderr, "error getting the window of the screen rotation: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int size [2];
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error getting size memory buffer window screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int temp;
  switch (angle - rotation) {}
  case - 270:
  case - 90:
  decision 90:
  case 270:
  Temp = size [0];
  size [0] = size [1];
  size [1] = temp;
  break;
  by default:
  break;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, &angle);)
  If (rc! = 0) {}
  fprintf (stderr, "screen rotation window for parameter error: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window buffer size of the screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  Return EXIT_SUCCESS;
  }

  /**
  To manage an event of navigator.
  *
  * @return @c the value true if the application should shut down, another fake.
  */
  public static bool
  handle_navigator_event(bps_event_t *Event)
  {
  bool should_exit = false;
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_EXIT:
  should_exit = true;
  break;
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true);
  break;
  case NAVIGATOR_ORIENTATION:
  {
  int angle = navigator_event_get_orientation_angle (event);
  If (rotate_screen (angle) == EXIT_FAILURE) {}
  should_exit = true;
  }
  navigator_done_orientation (Event);
  break;
  }
  }
  Return should_exit;
  }
  /**
  * Display an alert dialog box that contains the location data.
  */
  public static void
  show_main_dialog()
  {
  If {(main_dialog)
  return;
  }
  dialog_create_alert(&main_dialog);
  dialog_set_alert_message_text (main_dialog, "Acceleration to first fix");
  dialog_set_size (main_dialog, DIALOG_SIZE_FULL);
  dialog_set_group_id (main_dialog, get_window_group_id());
  dialog_set_cancel_required (main_dialog, true);
  dialog_show (main_dialog);
  }

  /**
  * Displays geolocation data in the main dialog box.
  */
  public static void
  display_acceleration_data (float force_x, float force_y, float force_z) {}
  char buf [1024];
  snprintf (buf, sizeof buf,
  "\tX: m\n % 7.3.f.
  "\tY: m\n % 7.3.f.
  "\tZ: m\n % 7.3.f."
  force_x, force_y, force_z);
  dialog_set_alert_message_text (main_dialog, buf);
  dialog_update (main_dialog);
  }

  void createafile() {}
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  {if(f==null)}
  file does not exist
  f = fopen (fullname, "r");
  {while(f!=null)}
  file exists
  fclose (f);
  ++ _logcounter;
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  f = fopen (fullname, "r");
  }
  }
  }

  write data to the file
  void writedataintofile() {}
  f = fopen (fullname, "w");
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  fclose (f);
  }

  /**
  * A sample application shows the native APIs of BlackBerry for accelerometer.
  * The example initializes and reads the accelerometer periodically until one
  * NAVIGATOR_EXIT event is received.
  Enforcement also tuned to changes status window in the browser so that
  * It can stop reading the accelerometer when the application is no longer visible.
  */
  int main (int argc, char * argv {})
  bool exit_application = false;
  /*
  * Until we can listen for events from the BlackBerry Tablet OS platform
  * services, we need to initialize the BPS infrastructure
  */
  bps_initialize();
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event). This allows to
  * us to clean up resources in the application.
  */
  navigator_request_events (0);
  dialog_request_events (0);
  /*
  * Initialize the screen so that the Windows Id is correctly set, to allow
  * dialogs to display.
  */
  If (setup_screen()! = EXIT_SUCCESS) {}
  fprintf (stderr, "Failed to initialize the screen.");
  Exit (-1);
  }
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  *
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event).
  *
  * We ask events of dialogue so that we can be notified when the service of dialogue
  * answers to our queries/requests.
  */
  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "error asking navigator events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  If (BPS_SUCCESS! = dialog_request_events (0)) {}
  fprintf (stderr, "error asking dialog events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  /*
  * Create and display the dialog box that displays the data from the accelerometer.
  */
  show_main_dialog();
  /*
  Prior to initialize the accelerometer function, we must ensure the unit
  * takes in charge
  */
  If (sensor_is_supported (SENSOR_TYPE_ACCELEROMETER)) {}
  /*
  * If the device does not support the accelerometer so warn the user,.
  * clean in and out
  */
  public static const int SENSOR_RATE = 40;
  sensor_set_rate (SENSOR_TYPE_ACCELEROMETER, SENSOR_RATE);
  sensor_request_events (SENSOR_TYPE_ACCELEROMETER);

  }
  /*
  * Initialize the accelerometer setting the rate at which the
  * accelerometer values will be updated material
  */
  accelerometer_set_update_frequency (FREQ_40_HZ);

  /*
  Treat browser events and take the accelerometer readings periodically
  * until we receive a NAVIGATOR_EXIT event.
  */
  createafile();
  f = fopen (fullname, "w");

  While (! exit_application) {}
  /*
  * By setting the timeout to bps_get_event to ACCELEROMETER_MAX_POLL_INTERVAL,
  * We assign the maximum duration (in millis) who will wait before
  * release so that we can take a reading of the accelerometer.
  */
  bps_event_t * event = NULL;
  bps_get_event (& event, ACCELEROMETER_MAX_POLL_INTERVAL);

  If {(event)
  If (bps_event_get_domain (event) is {sensor_get_domain()})
  /*
  * We woke up. See if we are in the paused state. If not,
  take a reading of the accelerometer
  */
  If (! pause) {}
  sensor_event_get_xyz (event, & force_x, & force_y, & force_z);
  display_acceleration_data (force_x, force_y, force_z);
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  } //paused
  }
  / * If this is an event of the dialog box, determine the response code and handle
  * the event accordingly.
  */
  {ElseIf (bps_event_get_domain (event) == dialog_get_domain() {)}
  ;
  }
  /*
  * If it's a NAVIGATOR_EXIT event and then set the exit_application
  * indicator so that the application stops processing events, clean and
  * output.
  */
  {ElseIf (bps_event_get_domain (event) == navigator_get_domain() {)}
  exit_application = handle_navigator_event (event);
  }
  } //if event
  } //while
  /*
  * Destroy the dialog box, if it exists.
  */
  If {(main_dialog)
  dialog_destroy (main_dialog);
  }

  fclose (f);

  /*
  * Clean the infrastructure bps and output
  */
  sensor_stop_events (SENSOR_TYPE_ACCELEROMETER);
  bps_shutdown();
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  return 0;
  } //main

  Hello

  As I said on your other thread:

  In order to write in the shared directory/documents, your application should request action "access_shared" and it must be granted by the user. Make sure you have

  access_shared

  in your bar - descriptor.xml.

  Also note that the shared documents folder may not be the best place to write the application log data. There is one connects / in the sandbox to this effect, or the application directory data / directory if the information should be persisted. The documents/shared/folder is designed for documents that the user creates or interacts with.

  HTH,

  Christian

• HP2000: HP 2000 display black but the screen showing all

  my laptop is hp 2000. its having problem with the display. While power on nothing, we can see on the screen, but other fine work (fan, caps lock, shift, wifi light, etc.) after that I can see Variant simplified on screen. I found any display on screen, but we cannot see. If we put a light tourch on screen, we can see the content. After I pass my turn and turn again and close the lid and display suddenly open came as usual. Once again, if it goes on standby or shutdown even mode problem will rise again. whenever I have to close the lid and open at the beginning... someone tell what is the problem on this... How can I solve this problem.

  @KRISHTVM1,

  Hello and thanks for the display on the HP support forums.  Please post back with the complete model and the product number of your laptop.  This will help me get you the link of your interview guide.

  The problem you are experiencing is cable going to the screen or the inverter.  It has come loose or broke.

  Here is a link to help you with that.

  Computers how can laptops HP - I find my model number or product number?

  Please post when you have a chance.  Thanks again for the post and have a nice day

• garbage scrambled display horizontal lines obliterate all or most of Firefox (IE sometimes) to display, also start the screen icons

  Steps to follow:
  While browsing in Firefox (most often), IE (a little) Chrome (rarely/never)
  Result:
  Start intermittently once commissioning is found on almost every screen.
  Horizontal black lines obliterate sections/parts of the browser, or together.
  Lines to come and go as you scroll up and down the screen.
  Resize fullscreen actually disappear, then it returns often.
  Expected results:
  Displays text fields as you wish.
  Notes: Atypical in the browser Chrome, occurs less often in IE browser. Most frequently encountered in Firefox.
  Failure of the workaround:
  Submit a new application or change the video driver.
  No effect. Problem returns.

  Steps to follow:
  Even scrambled corrupted icons on the start screen of Windows, erasing some or all the details icon, but not the bottom area.
  Results:
  Again, scroll back he made come and go.
  Just maybe 1 time per week on the start screen, everyday in browsers.

  Hi Chris,

  1. What is the Biostar mother board model number?

  2. What are the specifications of onboard graphics card?

  3. have you updated the BIOS and drivers from the chipset?

  Check if the Biostar mother board model is compatible with Windows 8 by clicking on the link.

  Since you mentioned the problem on different versions of Windows 8. Either the card mother or graphics card is perhaps not compatible with Windows 8, or you must update the BIOS and drivers from the chipset. Contact the motherboard manufacturer support to improve the assistance on the update of the BIOS.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, you will need to update your graphics card. For more information, see supported by motherboard Biostar.

  http://www.Biostar-USA.com/techmain.asp

  Hope this helps

• My Satellite P300D starts but does not display anything on the screen

  When I start my laptop it turns on but shows nothing, sometimes it works perfectly, and after that when I restart my laptop the screen remains black. Sometimes the screen just after 2. 3. Turn - offs, but sometimes not.
  Sorry for the bad English, I hope you know what is my prolem...
  Ty :)

  I know what your problem is, but the question is why this happen. Is this problem occurs sporadically and to me it looks like a connection problem. On this virtual path, it is not possible to provide the exact diagnosis.
  That may be, is contact FL inverter, contact screen motherboard or something with the graphics card.

  In any case, it's probably unwanted material.

• How to adjust the display to fit the screen when the computer is connected to the TV

  I HAVE PLUGED MY COMPUTER TO MY PLASMA TV, BUT HOW TO MAKE THE IMAGE TO FIT THE SCREEN ON THE RIGHT?

  I have a windows xp and a VIZIO television

  but the size of the screen is not the size of the tv, it's just the size it was on my screen... I know that there must be a way to adapt

  Hi PatriciaDelgado,

  Usually, this would happen if the resolution of the screen on the computer is not set correctly.

  I suggest that you change the resolution of the screen on the computer and check if it helps.

  Change the resolution of your monitor

  http://www.Microsoft.com/windowsxp/using/Setup/personalize/resolution.mspx

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

  Expand your workspace with multiple monitors

  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/monitors.mspx

• Display problem on the screen

  Hello

  I set my screen resolution of 1440 x 900, which is recommended, but have these problems:
  -Some programs starts, but doent open window
  -the mouse disappears outside on the left side of the screen
  -aero stops working
  I had this problem before, but it fixed. Yesterday, I got an update from Windows update, and then the problems were back.
  Help, please!
   
  Original title: Screen Resolution

  Now everything is ok.

  I have uninstalled several small programs that I never use.

  It could be a program called flplayer who got an update not so long ago.

  Thank you!

  Klaus

• HP DV6 recovery HELP! With the help of an external display because of the screen broke

  Hello and thank you all,

  So I have a dv61149 windows7 running with a broken screen, the screen has not been a problem so far that I have an external monitor via VGA. Now I have to do a cover of the factory, but I don't see what I do once my computer reboots into recovery!

  HP Recovery Manager says his will reboot in recovery environment, very cool. but I'm sure theres buttons to hit after the reboot... so. pWnd?

  Thanks for the reply but I fixed it myself. I could not buy a new screen. obviously. so I disassembled the laptop computer and completely deleted my screen. now when I boot, the computer can't find it so it automatically sends out video via vga. I see same BIOS now.

  Hope this helps anyone else with this problem. take apart seemed to be a huge task but it wasn't bad at all, my computer pretty much had like 15-20 screw the rest just broken into pieces and broken back together, it was pretty easy.

  using HP DV6 1149WM

  Good luck

• My screen Display Properties lack the screen saver tab?

  Recently, I installed XP on a new drive hard and now when I go to Display Properties screen by right-clicking on the desktop, there is no screen saver tab that allows the selection of a screen saver. What can I do to fix this?

  Try the fix of Ramesh Srinivasan:

  Restore missing tabs in the display properties dialog box
  http://www.Winhelponline.com/articles/38/1/restore-missing-tabs-to-the-display-properties-dialog.html
  Download: showalldisplaytabs - xp.vbs

• I optimize my xp sp3 with XPTune all of the default software setting disappeared and now old looking for display appear on the screen. I want that my failure to return

  Display

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers XP

  _____________________________________________________________

  you could also do a repair of XP instead of a full reinstalling installation

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  for any other question of XP

  Here is the vista forums

  Try the forums xp on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Setting display to adjust the screen from black.

  Where settle this on Vista Home Premium? Impossible to find.

  Hello

  Control Panel - Power Options - Choose top left when turn off display

  Also check the power Plans - change plan settings - check those and advanced settings
  Reset to default values if necessary and then set as you wish.

  Control Panel - personalization - screensaver

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• The one year warranty for MBP 13 "Retina display covers the replacement of the screen

  The warranty of one year for MBP 13 "Retina display covers replacing the screen?

  "Materials or manufacturing defects.

  Technicians Bar genius most do not think that the glass may break spontaneously, and so they assign screens unless broken not latent, bad manipulation. You are likely on the hook for the replacement of the screen of"Pocket".

• How to display two open sites at the same time on the screen instead of switch between tabs?

  I need to open two different sites using Firefox. They appear as tabs, but I can only show a tab at a time and have continually switch back. I need to have two separate sites open and displayed simultaneously on the screen. Is there a way to do this or an add-on that will support multiple windows open on the screen?

  You can open all pages in separate windows and resize and position windows horizontally or vertically to the two visible at the same time.

  Note that you can drag a tab slightly downwards in the navigation window to tear off the tab, or use the context menu of the tab (transition to the new window).

• 10.11.4 position of the window off the screen after awakening from sleep + external display

  Does anyone else have problems with windows being placed off screen when waking up their MacBook Pro from sleep mode or when using an external monitor?

  I have a 15 "rMBP and regularly connect with lid closed to a Dell screen 4K P2715Q. Whenever I wake up from sleep, many of my windows are off-center and move the windows from the edge of the rightmost to the Center.

  I can't say with certainty if it is specific to the application or for all windows, but Mail.app and Messages certainly do.

  I will do some tests later and post updates. Thank you!

  Hello

  I take this in system preferences > displays the mirror effect is on?

  What resolutions are two screens to?

  How to wake up the laptop from sleep?

  If it is by lifting the lid is on the Mac you see it?

  If it's the position carries no report available to the larger screen?  (i.e. If the laptop could match the larger screen resolution would be the 'shift' appear in the same place, as the laptop was a cut from the larger screen).

  In system preferences > displays which is the screen to 'drive '?

  

  21:17 Wednesday. May 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)