distortion of margin Officejet 7000 borderless printing

Similar Questions

• HP Officejet 7000 stopped printing large format

  My HP Officejet 7000 (printer large format) is no longer print tabloid or more, I do not see even an option super b3 (13 x 19) on my list drop-down media printing in Illustrator format. When I try to print tabloid, it indicates the paper size is incompatible when it is not and sends a blank sheet of paper through. It prints well 8.5 x 11 but nothing more. Any ideas?

  I deleted and added the printer to my list and it fixed the problem.

• printers large format HP Officejet 7000 - black print Green

  I'm printing to pdf from autocad drawings in a frame in grayscale.  The shaded areas and lighter lines are all printing under a greenish color.

  I tried to clean the heads.

  You are probably low on magenta ink.  Black in pie charts are printed with color inks, a weak magenta would yield a green result.

• HP Officejet 7110 wide printer - problem with MARGINS

  Hello!

  I changed my old 1220C for a wide format 7110.

  I try to print from AutoCAD drawings A3 file (I'm an architect), but one side of my drawing always gets cut.

  I tried printing on all available paper sizes, I tried to change the margins, I searched the forums for suggestions, but nothing seems to help.

  I don't need borderless printing, I need to be able to print my drawings with a 25mm from the left edge and framework that is 5 mm lower and top edge, right, but I can't get the right margin less than 16mm (others print correctly).

  When I change the margins manually from the print window in autocad, I have print preview displays properly, but print still cut the right side.

  Help, please. I ' ts driving me crazy, and I have the same problem at home and at work, because we recently purchased the printer even in my office too.

  Both printers are installed on the Windows 7 operating system (one is a 32-bit and the other a 64-bit version).

  I repeat - I have no need to print without borders, just decent margins in my plain paper drawings.

  Thanks in advance for any help,

  IVA

  Managed to solve the problem after more than three hours on the phone with HP support amazing guy

  -install the drivers for the printer large format HP Officejet 7000 (E809a) (link below) and borderless A3 print on plain paper - and I can finally print the designs normally!

  (link to the drivers:)

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3883002)

  IVA

• OfficeJet Pro 8620: Print borderless with Officejet Pro 8620

  Hello

  I recently bought a hp OfficeJet Pro 8620 and I'm testing now a few important functions for my business. One of them is printing without margins of leaflets in A4 format. But the problem is: even if I chose "A4 borderless" paper size and "photo paper" like paper it always prints a white border around entire page--so he is not chosen in the menu borderless printing. The flyers that I want to print all pdf format and print them with a program called "document viewer", but using another program for printing without margins such as gimp makes no difference!

  By the way: I'm (Lubuntu 16.04) Linux as an operating system, the printer is connected via usb and the driver that I use is "HP Officejet Pro 8620, hpcups 3.16.3.

  Please help me to find a solution to this huge problem, because printing flyers for my small business is one of the most important reasons I bought this printer for and I urgently need print flyers (without borders) for the weekend too.

  Thanks in advance!

  Hello everyone,

  It's me again. Yesterday, I solved the "problem".  The problem is that the image of the pdf file that I wanted to print without borders had the size 210 x 297 mm (A4), but I had to larger scale to 214.5 x 300 mm, 9 mm up to what he had the correct size for printing without margins (A4).

  Unfortunately, these strange dimensions does not exactly appear in the dialog box size media in settings print HP Tools program but rather to the dialogue of the PDF Viewer, if you select the paper type and paper size. I do not understand this, but I finally works, and that's all I wanted. In any case thanks for trying to help me!

• OfficeJet Pro 8000 - is no longer prints borderless print after upgrade - Tiger for the Mac Snow Leopard

  Mac OS X 10.6.8

  HP Officejet pro 8000 A809

  Wireless

  HP Photosmart Studio v. 9.7.4

  After upgrading from Tiger to Snow Leopard I lost the ability to print without MARGINS - until that time, that I had no problem.

  I use HP Photosmart Studio to print, but get the same error every time: "the selected printer supports the paperwork without borders. If you print, will serve the maximum printable area of the current paper size.

  I downloaded the most current driver after that I improved and I was able to print in general - when I try to select borderless printing it tells me that this printer does not support. I was able to print without margins using Creative Suite Indesign and printing of this app--but have lost the functionality of the HP Photosmart Studio is really a drag - since I have to do all sorts of adjustments to do workaround printing.

  Is it possible to upgrade Photosmart Studio? or re-start it? I'm lost and need help.

  Thank you

  If you always reminants of the HP software meant for 10.4, you must uninstall the software by using the "scrubber".  If you have already uninstalled, reinstall from the CD, then:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• HP Officejet 7000 Wide Format: HP 7000 809 does not print the data

  I updated to the last version of drivers and full software (14.8.0 dated August 2014) and ran HP Scan Doctor which States product is installed correctly and all systems are ready to print, all tests are checked as well with the green arrows. I have the printer connected via USB - 6 ' cable 2 wired connection. The results after the execution of Test Pages from doctor Scan is the same no mateer I want. Test page initialled, the printer is atemtps insiders to print, momentarily stops and then sends an empty page, no data.

  My computer is a Dell 8700, channel quad 3.4 gig ram 12 GB, Nvidia videocard W/2gig Ram, drive 'C' Solid State 240 G on which is installed an OS Pro 8.1 Windows with all latest updates. The Dell system has USB 2 and 3 ports and I made sure that this printer is connected to port USB - 2 ports (USB Ports are color coded).

  I thought it was a driver problem, since I had been running the printer with Win 7 Pro last worm update o/s without any problem, but since the switch to the wire to 8.1 win that developed and that I just downloaded latest software and drivers for the moment, I'm stumped. SUGGESTIONS, thank you I use it with my CAD software for businesses.

  Welcome to the HP community @Budjet1,

  I noticed your post on the white pages of your Officejet 7000 Wide Format printer print test, even if the print and Scan Doctor shows everything to check very well with the printer. I wanted to respond to tell you about my suggestions. It may be a problem internal to the unit, or perhaps with the ink system and recommend to try the steps in the guide I posted below.

  If the test still pages print as white pages, try to contact HP to discuss a replacement for the printer.

  • HP Officejet 7000 (E809a), 7000 Special Edition (E809b) and large printers Format 7000 advantage (E809c) - solving print quality problems

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• OfficeJet 7000 Wide Format pri: HP Officejet 7000 Wide format printer will not print black ink

  I'm looking for a solution fix what is an occasional problem with our Officejet 7000 and arose once again today. The printer will print any black ink. I did the procedure to print alignment and cleaning print head as well.  I tried to clean the evacuation on the real printer cartridge area as recommended by some responses from support group.  When this has happened, I can fix it usually wiping the area where the ink comes out of the printer cartridge, but nothing works today.  The cartridge is 3/4 full.

  Other than to throw this printer and all the ink cartridges, I bought already for later use, suggestions for what else someone could solve this problem?  There seems to be a lot of people who have posted similar problems in recent years.

  Hi @P-architect,.

  Thanks for the reply.

  The only print head is CN643A, the 6500 and 7500 HP 564 cartridges as well usage. I searched the HP Print Store and found that you really want to be looking for a KIT of REPLACEMENT FIELD HP 564, and the part number is CE001A. The replacement of the field Kit contains a set of ink which are used to set up the print head. It's not like there are none currently in stock, but it is a clickable link to resellers who may have one available.

  I hope this helps!

  Thank you.

• In our officejet 7000 E809 black ink is not printing. We are not alone.

  In our officejet 7000 E809 black ink is not printing. You are looking for here we are not alone: http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead/Black-Won-t-Print-HP-OfficeJet-7000-E809a... We have replaced the cartridge. How can this be repaired?

  In fact, don't you worry. I figured out how to clean the print head. And fixed it. Thank you.

• HP Officejet 7000 Wide Format: HP Officejet 7000 Wide Format Printer - E809a - loss of connection through router

  We have a problem get sustained response of our HP Officejet 7000 Wide Format Printer - E809a which is connected to the network wireless ethernet to a router Netgear cable.  We tried stripping on the software driver & uninstall of the printer of the registry, and then re-setup from latest downloads from the HP site.  It works, especially if the device is set as the default printer, but the printer greys out less than an hour in the device registry and the default value automatically resets to another printer.  Does anyone know why this printer loses his connection?

  Hi @Harry64,

  I see by your post that continues to change the default printer. I'd love to help you.

  Disable the SMTP setting in print, to see drivers if this will help.

  Devices and printers, click with the right button on the printer and click on printer properties, click the Ports tab, select Configure the Port, clear the SMTP check box and the printer should display online.

  If the problem persists, please take a look at this document. Monofunctional and HP Printers Multifunction - "the printer is offline" Message appears on the computer and the printer does not print: Windows 7

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• OfficeJet Pro 8660: default margins with double-sided printing

  I have a 8660 OfficeJet Pro connected wireless via a network to two computers, one running Windows 7 and the other running Windows 10.  On the Windows 10 machine, I noticed that when I print on both sides of the paper, the default printer to the print wide margins (1 ").  For example, I have a 3 pages with 0.25 "Excel document margins.   If I print it in the form of three separate pages, it prints very well, with margins as I have defined it.  But if I print the same document using the option "print on both sides", the printer uses the wider margins.

  This only seems to happen on Windows 10 machine.  Given that the two computers are connected through the wireless network, I do not understand why they should all work differently.

  I hope someone can help!

  Hi @Patti_Mik,.

  Please get back to me and provide other information. I see that you have the printer Officejet Pro 8600 Plus.

  If the same document print from another computer, there is probably a problem with the driver for printing on Windows 10.

  Please download and run the print and Scan Doctor, to confirm that you are using the correct printer driver.

  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?

  In addition, I would like to try to create a custom paper size to see if you can get it to print properly.

  • HP printers - creation of custom paper sizes

  What program are you printing from?

  • Try to print the document to a different application.

  Please reply to this message with the results. Good luck!

• HP Officejet Pro 8630 - work of borderless printing produces blank pages

  Hello-

  On my HP Officejet Pro 8630, when I start a print job and select ' without borders on "print 3 or more copies, the first 2 pages of the print job, and then a blank page prints, followed by a good impression, followed with a blank page, etc. until that work ends.

  If I disable the option without borders, the job will print correctly without blank pages.  I tried printing from multiple computers and programs with the same number and have updated printer drivers / the most recent versions.

  I tried printing wired network, wireless network and USB all with the same result.  I've had the printer for less than a month.

  I use the printer for business purposes, and it is causing the major headaches!

  Thank you

  I solved the problem by selecting the Type of paper - HP Bright White... She has been set to the default value of plain paper.  I can now borderless printing correctly without blank pages.

• HP Officejet 7000 Wide Format print black lines on photos

  HP Officejet 7000, model # E809a, began to print horizontal black lines, at equal distance about 1/2 in., through photos.  I ran a cleaning cycle that showed felt clean, without burrs, without black lines.  Please advise...

  Hello MerlotLady,

  The lines are clearly visible and look like, they are caused by the inkt not bleeding very well through the paper. In this case I advise to use another document. I checked the HP website for you and HP recommend the advanced use of paper. If any kind of HP Advanced paper will do, either gloss or high gloss as long as it's the HP Advanced line. A copy of the recommendation below. If this will still not solved the problem, best thing to do is contact your local HP support. Let me know if it helps.

  "Advanced photo paper.

  Best for printing with HP 02, 38, 60, 110, 564, 920 or 940 inks; «you get vivid, dry instantly, stain - resistant and water - photos»

• Print color Officejet 7000

  How can I disable color printing on my printer Officejet 7000 wide format? I use Mac OS 10.6.8 99% of my printing requires only black and white.

  Terry

  Hi TerryP

  1. Start the application used to print print dialog box
  2. Click the box of the most recent selection, named as the Application (TextEdit for example) or Copies of Pages in MS Office
     You can spend the options settings by clicking on the arrow down near the name of the printer
  3. Select the paper / quality
  4. Spend down color Options
  5. Once the definition of the color to grayscale, an option use Black Ink only will appear

  You can save the configuration by clicking the predefined dialog box

  Make sure to use the color ink from time to time so that ink will not get not dry

• HP Officejet 7000 - biased and slanted printing

  HP Officejet 7000 wide format printer (A3 and A4)

  Operating system: Windows 7 (32 bit)

  We use this printer for 6 months without any problems for our SMEs.

  Recently we have had problems with the print quality.

  A3 prints are spread between 2.5 to 3 inches.

  I have changed all the print cartridges, run the HP software to re - align the cartridges and clean the printheads several times.

  The paper adjustment arm is ok and his training online right.

  I checked the rear access panel and it is fixed properly.

  We use only one type of paper - a lightweight conqueror.

  We print mainly table A3 with her plans.

  Mainly use us MS publisher, Illustrator, but also print PDFS as well.

  We do the photos printed with this printer - text for graphic images.

  The printer has no intensive use - we have another HP laserjet for the majority of the other the methoeds.

  I think that the printer has a harware issue.

  Any advice or help would be appreciated.

  Here's a link below which may help you with this problem.

  http://goo.GL/tn9PG

  Let me know if this can help, thank you.