DMM Administrator role maintains only superuser after reboot

Similar Questions

• Dell V313 only prints after reboot

  I have a Dell V313 printer all-in-one that allows to print only after that I restarted the computer.

  All documents are in the queue and they print after restarting.  Pretty frustrating.

  Any advice?  Thanks in advance.

  If you have IE 11 installed, uninstall it and your problem should go away.

• El Capitan keyboard does not not after reboot

  I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

  After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

  I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

  Try again in Safe Mode.

  Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.

• Can not see my own account after reboot

  After reboot I can only see the original user on my Mac + comments, but not the one I added.

  The original is my wife so if it connects inn, first of all, I'm able to move my user by logging out (users obtained all visible) or by selecting my self in the menu to the left of the projector users.

  Upgrade to 10.11.4 to see if there was a problem with 10.11.3 who was present when the account is added.

  It's annoying to sort of not finding your own account and I wonder what's wrong.

  Anyone with an idea?

  Hello dusanofrode,

  Thank you for contributing to the communities of Apple Support.

  If you cannot connect to the original account on your MacBook Pro, looks that FileVault has been activated. It encrypts the bootable floppy and requires that the original to "unlock" before user other users can subscribe in their user accounts. I can see how that might be irritating in the circumstances, and I have a few suggestions to check the situation and helps connect you to your account a little more quickly.

  To see if FileVault is turned on, connect to the user account of your wife and choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault. You can find more information about FileVault in Use FileVault to encrypt on your Mac startup disk.

  If FileVault is turned on, you have two possibilities to be able to connect to your user account to start.

  • "Activate" your user account to connect to start up the Mac. You can do it in the preferences of FileVault (located under Security and confidentiality in system preferences):

  Allow users

  Click to enable users to log on at startup and unlock the encrypted information on the Mac. Users who are not enabled need an administrator to log on before you can use the Mac.

  Of OS X El Capitan: FileVault pane of security & privacy preferences

  • Turn off FileVault:

  When you turn off FileVault, the encryption is disabled and the contents of your Mac is decrypted. Decryption may take some time, depending on the amount of stored information. However, you can still use your Mac to perform other tasks while the information is that is decrypted.

  1. Choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault.

  2. Click on the lock icon to unlock, then enter an administrator name and password.

  3. Click on turn off FileVault.

  4. Click on disable encryption.

  Of OS X El Capitan: turn off FileVault encryption

  All the best.

• The mouse settings not saved after reboot/restart

  I'm changing the speed at which my mouse pointer moves on the screen.  I'm doing a 'demand' the change, and then click on 'ok '.   The point of the mouse moves faster in the game.  Then after reboot/restart the computer, the mouse setting is default slower movement speed.   The changes are not saved after reboot.   What keeps the change of speed of movement of the mouse to be saved?

  Mr. Brian,

  Please, try the following steps.  This should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  1. click on the Start ORB, type msconfig in the Search box and hit Enter
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
    2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to them (there may only be a)
  4. click OK and restart your computer
  5. after reboot, change the speed of your mouse pointer and restart

  This should solve your problem.  Please let us know.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setting advanced system not saved after reboot/restart

  I changed my settings of performance... then when I restart my computer... the computer is always the same as the front... I use a standard account... when I went to the administrator, it works... I want to change my standard user performance parameters. :'(

  Hi Erik,

  Using the standard user account to change settings?

  If you are connecting with a standard user account and then try to change the system of advance parameters he will automatically restore to the default settings after reboot, due to the user account permission.

  Note: If you want to change the advance system settings you must change the settings using the account administrator only.

• Local administrators on Windows of vCenter server is automatically granted 'Administrator' role in vSphere

  
  This still applies (5.0 and 5.5).  I might have missed in the 5 documentation site.  I see still ESX Admin workaround applies to 5.5 and wondered about the role of local administrators.

  VMware vSphere 4 - ESX and vCenter Server

  
  It's the 4.0 site doc.

  "Host records all selected Windows domain user, or a group through the process of assigning permissions." By default, all users who are members of the local windows Group istrators Adminthe vCenter Server have the same rights of access as any user assigned to the Adminsector role. Users who are members of the group Administrators can log on as individuals and have full access. »

  EDIT - I found this... VMware vSphere 5.1

  Seems to be the same... :))

  The main difference is that before 5.1 and 5.5, the local Administrators group on the server vCenter Server is the default vCenter Server Administrator. With vCenter 5.x with the addition of SSO, installing vCenter, you will be asked which user account or the group will be initially given and vCenter Server Administrator role. Here is the screenshot. This screenshot, after installing vCenter, only the [email protected] has the role of administrator on the vCenter server.

  

  If you upgrade your server vCenter to 5.x since a previous version using a Simple installation, if I remember correctly, you won't see the screen above as the installation will use the existing as the vCenter Administrator local Windows Administrators group.

  It will be useful.

• RN204 not reconnect the USB in the port back after reboot.

  I don't know if that's a problem, but my new RN204 unit will not see my USB stick after reboot. Key, I inserted into the lower back USBport. Port superior return I got UPS. Inverter is connected ok after reboot.

  If the USB is in front of USB port, unit connects OK after reboot. Rear ports, I have to go out and re - insert USB stick after every reboot. Key is detected and mounted after rehabilitation only. (connected external storage device.)

  USB drive is Kingston USB 3.0 and my RN104 unit detects that it restarts after all in backport more or less right. (after a reboot it tell me automatically (connected external storage device.))

  FW on the two unit (RN204, RN104) is 6.4.1 - T35, tested on 6.4.0 and 6.4.1 beta 1-2 - all the same.

  Hi all

  After you install the new version of FW 6.4.2 (Final, published today), everything looks OK. My RN204 unit reconnect all the USB key, that I tested.

  Everything is OK, the Bug disappeared. I think that FW 6.4.2 is the solution to the issue being reported.

  Thanks Netgear.

• Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)

  My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.

  I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?

  P.S. I had and have the 32-bit version of Windows.

  ny6uctblu,
  Have you checked with HP on any problems with this software?  Here is a link for download of HP for the software.  You should also check that your BIOS is up to date.  I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely.  This thread can also give you some other ideas.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen after reboot XP

  On my husbands computer all it can get after that restart is a black screen with the cursor showing, after it does appear the welcome with the blue bar of windows mobile screen.  The computer was working fine all day, he was doing research and everything froze, his slider when placed above the start button would show only an hourglass so that he could not restart normally must manually turn off the computer. After reboot, all he got was a black screen with the cursor showing, nothing else.  I tried to boot in safe mode and chose several options, but whenever he could bring up a black screen showing 'safe mode' in each of the corners of the screen and a set of numbers followed SP3 upstairs at the center of the screen, nothing else.   I couldn't do a system restore or anything whatever, and I suspect that the problem came from the last automatic update.  I see most of the questions on this help dealing with Vista, has anyone using XP Home figured out how to fix it yet.  It's almost 4:00 and I worked on this for the last 4 hours!

  Hello

  Start in safe mode.
  Uninstall SP 3:
  http://support.Microsoft.com/kb/950249

  And perform the repair facility.

  http://www.WindowsReinstall.com/WinXPHome/sp2sp3installxpcdrepair/indexfullpage.htm

  All the best!

• Bug in Vista without response: the icons of the Office Keep disappear after reboot - have to manually make it visible each time that

  Vista!

  Bug again issue: Vista Desktop Icons keep disappearing in the course and more !

  Out of nowhere, my desktop icons disappear after reboot. When I reboot, they appear for about a second and then they are gone .

  I have to manually select the view desktop items box every time after a reboot . I tried a clean reboot but nothing. By coincidence, the sidebar keep appearing EVERY TIME that I reboot my unchecking it displayed when it restarts.

  Y at - it a fix for this bug that continues to make my office disappear and make me manually make them visible?

  Help!

  Hi ad391970,

   

  The reason for updates make changes on the computer would be some conflicting third-party programs or there might be a corruption in the Windows Update components.

  I suggest that you try to install updates by disabling the third-party program conflict and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the step above does not resolve the issue updates suggest that you try to reset the component of windows update and check if it works.

  Check out the link below to find out how to reset the windows component update

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If the step above does not resolve the question suggests that you check in a new user account if you are faced with a similar question. If a face similar to a new user account which means your other user account has been corrupted.

  See the link below for screw a corrupt user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Torch 9800 blackBerry smartphones stuck after reboot and removing muncher

  Hi, someone at - it help me on this problem...

  I bought this lamp almost 2 years (first model)... Since 2010, there is no critical problem has occurred so far, but...

  Today my torch can be the use of these problems. Let me explain the details.

  1. I installed white (screen capture program), after installed I launched this apps and my bb automatically rebooted.

  2. then, after restaterd, the bb can be used as usuall and I don't start screen muncher apps after (case 1).

  3. last night, my bb works correctly and it is no problem at all...

  4. this morning, I think that to remove the apps (muncher) because I no longer use. Then, I deleted this application using normal procedures. And, as we have known it, bb must be restart after unistalling all the apps, then I restart.

  5. to restart (loading bar) is stopped to load 3/4 bars... So, I take the battery out to restart once again...

  6. after rebooting, my bb seems ok until it to load menus and other. But it's only for 15 seconds. After 15 seconds, an icon (loading star * like the sunflower) appeared.

  7. my bb stuck and I can ' t use any button / touch screen function. My screen will not also turn off their light.

  8. I tried to restart almost 6 times (remove battery), but it still the same...

  * I use the menu for 15 sec then it becomes insensitive...

  Please help me...

  Sorry for not including 'return first '. I think that he or she has not read the article.

• BlackBerry smartphones my new favorite 9970 "BOLD" and no progress after reboot

  Hi all

  Your guys need help, my new favorite 9970 "BOLD" and no progress after reboot. I have a open the case and remove the batery and reinstall and still no improvement. Please asist.

  Hi abdulkader2002,

  Welcome to the community,

  Please take control of your applications do not install unwanted applications. Install only those who you most need. Please press on and press and hold the Menu for a few seconds, it will appear a screen that will display all the programs running in the background, usually five will always look here (home, BBM, Message, phone, browser), appropriate to other applications. are running.

• Can not connect to vcenter after reboot

  Hello VMware,

  I can not connect to vcenter after reboot with the error «Failed to connect to the Vmware research service»

  

  I tried to follow below doc but no help.

  http://www.myvmwareblog.com/2012/11/28/lookupservicesdk-SSL-certificate-verification-failed/

  I tried to play with the Vcenter screen underneath, but no luck.

  
  

  To resolve this problem, replace the VCSA IP with hostname VCSA in the search service configuration file, ls_url.txt file.

  To replace the VCSA IP address with the host VCSA name in the ls_url.txt file:

  1. Connect to the VCSA via ssh under the root user
  2. Go to the directory/etc/vmware-sso using the command:

     CD/etc/vmware-sso

  3. Make a backup copy of the file ls_url.txt using the command:

     CP ls_url.txt ls_url.txt.bak

  4. Open the file ls_url.txt using a text editor
  5. Replace the VCSA IP address with the host name of the VCSA. For example:

     https:// Lookupservice/XXXXXXXXXX/sdk

     Where XXXXXX is the host name of the VCSA.

     Note: It is usually the host name of the domain the VCSA FULL name. Make sure it matches the common name (CN) in the certificate name.

  6. Restart the VCSA services by running the command:

     restart the /etc/init.d/VMware-vpxd
     restart the /etc/init.d/VMware-SSO
     restart the /etc/init.d/VMware-InventoryService

     Or

     Restart the VCSA.

  Alternatively, you can use this workaround to regenerate the certificates for the vCenter Server Appliance.To to regenerate the certificates for the vCenter Server Appliance:

  1. Temporarily change the IP address of the vCenter Server Appliance to a different IP address, not used
  2. Restart the vCenter Server Appliance
  3. Change the IP address of the vCenter Server Appliance to the originating IP address
  4. Restart the vCenter Server Appliance
  5. Connect to vCenter Server Appliance, https://vcenterserveripmanagement Web page: 5480
  6. Click the Administration tab, and then select Yes to certificate enabled regeneration
  7. Click send to save the changes
  8. Restart the vCenter Server Appliance

• Mapping the privileges predefined to those indicated in the GUI-> Administration-> roles-> privileges

  
  Hello

  This time, I have a question about the GUI Web Client itself.  I've been working on looking for predefined privileges before offering a feature in our plugin.

  I am able to know if the privilege is granted for an object in my data provider.

  Now, I'm ready to test, so I have:

  -created a new user in the WebClient service

  -created a role that will be assigned to this user of an object (host)

  Now, I want to assign privileges to the role, but has problems to understand GUI.

  I go to Administration-> roles

  -create a new role

  -Click on the tab 'privileges '.

  Here, I see a tree containing all the privileges that can be assigned to the role, but I'm not able to map these 1 x 1 to

  the ones I'm looking for.  An example is

  'Host.Config.Settings' that is needed to perform the UpdateIPMI() operation for a host.

  For example, in the tree, I opened

  v home

  v Configuration

  I expected to see 'Settings', but only

  -Advanced settings

  -Change the settings

  So my question is, how do I know which of these to be defined (without error). Is there a documentation which maps the privileges in the GUI to

  the 'real' like 'Host.Config.Settings '?  The link help for the link to the Documentation isn't really help here.

  These are the privileges for which I find no parameters (at least, it's not intuitive)

  Host.Config.Autostart

  Host.Config.Settings

  Host.Config.NetService

  Thanks for the Info.

  Cathy

  Hi Cathy,.

  Here's what you'll need:

  Host.Config.AutoStart = startup configuration automatic virtual machine

  Host.Config.Settings = change the settings

  Host.Config.NetService = security profile and firewall

  Concerning

  Kaloyan