Unable to connect to wireless error: DNS server your may be unavailable

Similar Questions

• Unable to connect to the main DNS server when you try to access the internet

  Computer has worked fine for the year last until 2 weeks ago and now unable to connect to the internet.

  Windows Vista on broadband and services connected directly to the modem by ethernet.  Provider Internet has run tests and confirmed modem is fine and it's like my laptop runs very well on it.

  Re-initialization of the modem, internet works and you can type in a few places and it seems OK, but you can't do anything on a site, it is, enter the details and even if you try and enter anything, you can usually view 2 sites and then it goes again.  However, the network icon shows that on and connected to the internet.

  The diagnosis, it is said that he cannot access the primary DNS server.

  Do you have any idea how I can fix this or should I just completely re - install windows from the original disk set?

  A few things you can try...  [This will be the Windows to try to automatically fix your connection]

  Open 'Network and sharing Center' (you can search for it in the Vista Start menu)

  Under tasks, click on "diagnose and repair".

  If this fails, you can try...  [This will use the NETSHell utility to RESET your network interface (removes all static configurations and sets DHCP)]

  Open a command prompt (you can also search for it on the start menu in Vista, if you have this OPTION enabled, you need to start as administrator)
  The type of command line: NETSH INTERFACE IP RESET. JOURNAL

  If you still have problems, try to post your IPCONFIG/all, file HOSTS and ROUTE PRINT on this forum.

  How to:

  IPCONFIG/ALL
  Open the command prompt and type: IPCONFIG/all
  To save the output to a file simply type at the command prompt: IPCONFIG/all > filename.txt

  Your HOSTS file is located in the following path (the HOSTS file does not have an extension, it is simply named "HOSTS"):
  %windir%\system32\drivers\etc\HOSTS
  or
  C:\Windows\System32\Drivers\ETC\HOSTS

  ROUTE PRINT
  Open the command prompt and type: ROUTE PRINT
  To save the output to a file simply type at the command prompt: ROUTE PRINT > filename.txt

  PS: If it becomes really hairy, you can provide NETSH DUMP (this provides virtually all network configurations)... You certainly shouldn't need to re - install Windows.  There is probably a setting of network configuration problem that causes this problem.  Good luck!

  -Rob

• Cannot access the Wi - Fi connection with the error: "DNS server is not responding" on Windows 7

  So, recently, I installed a new router. After restarting my modem as indicated in after connecting the router to the modem, I was surprised to see that the wireless network has been renamed to (name) 2. I continued with the installation and soon found that it happened too much to the network from the router, and none of them does not seem to work. They tell me that the DNS server is not responding. for the last ive tried day every last problem I can be downloaded on the internet and nothing seems to work. pls help

  Original title: renamed networks and will not work

  Check if your modem has a built-in router.  If so, it should be disabled until your router works.  If this is a new router, contact the manufacturer of the router.  They will help you.

  It is not likely a problem on your computer.

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• Unable to connect to wireless networking

  My Toshiba laptop has been pre-installed with Windows 7 Home premium 64 - bit OS and it worked quite well with the BB wireless. However, the wireless internet was on and turned off in recent weeks, while other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always says "unable to connect to wireless networking. It seemed that there was something wrong with the wireless adapter.

  I got a new adapter properly installed TP-Link wireless. Fortunately, it worked; but unfortunately, it worked for less than 24 hours. It was really frustrating that I, like student full time, depended so much on the wireless network card.

  Help, please! Harry

  Hello

  You can enlighten us with:

  -What model do you use (eg..) L300-123)
  -What version of BIOS is installed?
  -WLAN driver do you use?

  All these questions are answered in PC Diagnostics are under Toshiba app folder in the start menu.

  BR

  Tom

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.

  I received an email indicating that HP does not show me as having all printers which explains why I have not received information of driver update I guess.  But when I typed in HP4500 G510, I received the following error message:

  Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.

  And since I don't know beans about computers, I don't have any idea what it means.

  Because I had to pick a topic, I chose the one above, but no other choices were nowhere near cover.

  Hi mac64.
  I understand you are trying to register for updates for your Officejet 4500. I can certainly help you with this.

  I'll give you a link to try to register for driver updates. Please let me know if it's the same link you used and if this works differently for you, simply click on the following link: the HP driver updates.

  Hope to hear from you soon

• DOUBLE DB: ORA-17629: unable to connect to the remote database server

  [oracle@ora11g1 ~] $ export ORACLE_SID = sales
  [oracle@ora11g1 ~] $ rman target sys/sales@sales
  
  Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: SALES (DBID = 690066655)
  
  RMAN > Connect auxiliary sys/salestby2@salestby2
  
  connected to the auxiliary database: SALES (not mounted)
  
  RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
  2 > DB_NAME SET = 'sales '.
  3 > SET DB_UNIQUE_NAME = "salestby2".
  4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
  5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
  6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';
  
  From duplicate Db 5 June 13
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 20 type of device = DISK
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
  clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
  }
  execution of Script memory
  
  From backup 5 June 13
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 58 type of device = DISK
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server

  Welcome to the oracle forums!

  Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE

  Always after 4 version oracle numbers and details of the OS.

  Post any request outside has put between.

    \
  

  Tags

  Mark your questions answers if you give the answer

  Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server

  SCP $ORACLE_HOME/dbs/orapwv112 : /u01/app/oracle/product/11.2/dbs/orapwdupv112

• ADF / integration OBIEE: unable to connect to the presentation BI server

  Hello
  Using JDeveloper 11.1.1.6, I created an ADF application to test its integration with OBIEE 11.1.1.6. The request contains the jsf page that holds the OBIEE dashboard. Next, OBIEE, I created impersonate user. When I run this application on Weblogic Server built-in, it shows dashboard OBIEE perfectly. But when I deploy the application on weblogic OBIEE server, deployed with success but shows following error when we try to access the application via a URL.
  
  Unable to connect to the presentation BI server. Please ensure that it is running, configured correctly, and that the details of the connection in this application is accurate. Please check the log file for more details.
  
  (Http) connection works very well when check it out us inside the app. Can you please help how to solve this problem?

  Hello
  Bad news.

  How did you create the connection? In the resource Palette?

  I noticed that I have to drag the connection in the connections of Application resources (if it is not present), I have to uncheck in the properties/deployment of applications 'Powers' and cancel the deployment of the application and redeploy with JDEV (or em)

  This connection is really not clear in my mind

• ORA-17629: unable to connect to the remote database server

  Hello
  
  I have put Dataguard in place with primary and 1 physical standby for learning/test database:
  
  I do NOT plan the unloading of RMAN backups on the physics of the day before.
  
  Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
  I get the following error:
  ---------------------------------------------------------------------------------------------------------------------
  RMAN > catalog resync db_unique_name all;
  from full resynchronization of the recovery catalog
  full complete Resync
  resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
  ORA-17629: unable to connect to the remote database server
  ORA-17628: Oracle 17629 error returned by remote Oracle Server
  ------------------------------------------------------------------------------------------------------------------
  Configuration of RMAN for the main proceedings are the following:
  
  RMAN > show all to db_unique_name asttest;
  
  RMAN settings for database with db_unique_name ASTTEST are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  Configuration of RMAN for instance physical standby are:
  
  RMAN > show all to db_unique_name asttestb;
  
  RMAN settings for database with db_unique_name ASTTESTB are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  ----------------------------------------------------------------------------------------------------------------------
  
  When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)
  
  However, missing datafile scenario does not work on the physics of the day before.
  Here are the steps I followed:
  ********************************************
  1 renamed a file of physical data - in standby mode:
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf
  
  bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old
  
  
  2. restore the datafile (find the data file # view v$ recover_file):
  RMAN > restore datafile 5;
  
  
  
  From restoration to 5 October 11
  
  Segmentation fault
  
  
  3. in spite of the error, published "recover datafile command.
  
  4 RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  allocated channel: ORA_DISK_1
  
  channel ORA_DISK_1: SID = 10 type of device = DISK
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:00:40
  
  RMAN-06094: datafile 5 must be restored.
  
  
  5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
  bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.
  
  rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03
  
  bash - $3.2 ls - ltr
  
  Total 159096
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf
  
  
  RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  using channel ORA_DISK_1
  
  
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:01:59
  
  RMAN-06067: RECOVER the DATABASE required with a backup control file or created
  
  
  6. of course RMAN commands have failed to restore the missing data file;
  So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
  *********************************************************************************
  
  Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.
  
  The documentation I want to talk to is here (1 paragraph):
  
  [http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]
  
  
  Any pointers/direction and advise is greatly appreciated.
  
  Best regards
  NK

  I got it!

  /home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: PRIMARY (DBID=1562898590, not open)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  resyncing from database with DB_UNIQUE_NAME PRIMARY
  starting full resync of recovery catalog
  RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
  full resync complete
  

  If the necessary connection string a target/sys and a catalogue

  RMAN target sys / catalog /@rcatalog

  I did my standby

  Will try the primary

  Best regards

  mseberg

  Work on both. Great question!

  connected to target database: PRIMARY (DBID=1562898590)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  starting full resync of recovery catalog
  full resync complete
  
  resyncing from database with DB_UNIQUE_NAME STANDBY
  RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY
  
  RMAN> 
  

  Published by: mseberg on October 7, 2011 14:16

  Thanks a ton for sticking to it. I'll add this little thing to my web site.

  Published by: mseberg on October 7, 2011 14:22

• Unable to connect to a network error: DNS server does not

  * Original title: unable to connect to the internet - yellow on network acess exclamation point

  other computers, my ipad and phone can all access the internet via the same wifi connection.

  even a direct lan connection did not help

  shows of troubleshooting DNS server does not

  Help, please

  concerning

  Turkish Lira

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, I understand that you can not connect to the network on your computer.

  I can understand how frustrating it can be when things do not work as expected.

  To better understand this issue, I would like to know the following information:

  1. What is the brand and model of the computer?

  2. did you of recent changes to the computer before this problem?

  3. you receive an error during the network connection code failed?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  We will try the following methods and check if it helps.

  Method 1: I suggest you clear the DNS cache and see if that fixes the problem. Clear the DNS cache forces DNS to query a DNS server rather than using the information stored in the cache.

  Follow these steps:

  a. click on the 'Start' button.

  b b.. in the search box, type "command prompt"

  c. in the list of results, click on invite and then click on run as administrator

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns

  Restart the computer and see if that fixes the problem.

  Method 2: If you still have questions, I suggest you refer to the suggestions of Meghmala responded on 28 June 2011 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/DNS-server-not-responding-keeps-coming-up-and-i/58fc8366-B2B2-4A8D-9E30-56a155635631?rtAction=1422395012673

  You can also see the following article for more information:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Hope this information helps, please respond with the requested information and the status of the question to get help. We will be happy to help you.

  
  

• Error, "DNS server does not" when connecting to the internet.

  IAM using windows 8 and iball netsetter. But I can not connect net. When I use mobile connect its connection. But in netsetter, it is not connected. Error troubleshooting network as "DNS server not responding do not. Help, please

  Try changin public DNS dns...

  How to change the address of the DNS public IPv4 DNS server in Windows?

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-networking/how-to-change-IPv4-DNS-server-address-to-public/56548e8d-eb9c-4FC5-807C-eefca5d278d0