Initial setup of Orchestrator: Plugins not properly configured

Similar Questions

• Problem with the Modem devices: Modem already used or not properly configured

  I use windows 8. Until last night, my laptop was working fine, but now it rejects all the modem devices, I try to plug it. I tried to connect to internet via Auntie photon and reliance netconnect +, but this message "Modem already in use or not properly configured" keeps on appearing two modem devices? Is there a problem with my OS or my laptop? Help, please

  Thanks for the solution.
  Well, my problem was similar but different too. The method to uninstall the modem device is correct. I tried, but still it did not work.
  My problem was that I have 3 different modems installed on my pc, but I used one of them. So I would uninstall only one I used. It turns out that we have to uninstall all modems. Its pretty simple, but its not so obvious. I thought about it later in like 2 days. I hope that people reading this don't have to wait 2 days to fix this problem.

• PHP is not properly configured on your web server.

  Hello, I download a site Web of muse and me always error at the end - "1 WARNING.
  PHP is not properly configured on your web server. Forms of the muse does not work correctly unless PHP is enabled on the web server. Contact your Web host or Web site administrator on how to enable PHP support. "
  
  already on the site online form that do not send the email from the same mistake.
  
  How can I solve my problem?
  
  Thank you

  
  

  Margarida Amara

  Hello Margarida,

  Your Web host must support PHP and the PHP mail service must be properly configured to send e-mail messages. If you use the feature to download FTP in the Muse, Muse will attempt to warn you if it detects that your Web host does not meet these requirements.

  I suggest you contact your hosting provider in order to get this resolved.

  Thank you

  Ankush;

• MESSAGE - LOOK AT AN ENVIRONMENT MAY NOT PROPERLY CONFIGURED TO USE ADOBE READER.  HAVE ACROBAT READER AND USED, MESSAGE RIGHT ON THIS ONE SITE. HOW DO I FIX

  HOW CAN I FIX IT?

  Hi tomp3648858,

  Please refer to this topic If look at an environment is not properly configured to use adobe what should I do?, I would like to know if it's the same scenario.

  Kind regards

  Nicos

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• Do not properly configure updates

  Updates download and install successfully.  But then I get the "Configuring updates" screen and it says that the updates were not properly set up.  The computer says then it's the return of the changes and then I don't have updates!  Someone at - it a solution?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista - "updates were not properly configured"

  I have a laptop running windows vista Home premium 64-bit. It has not been used for a few months and when started upward to download a lot of updates. Subsequently, he needed to reboot and now all it will do is start up and put up a screen saying that the updates are not configured correctly. Revenant changes it shows this screen for a moment then restarts and displays this screen again, then restarts so endedup in a contuneous loop. If I try to boot in safemodes he always does. using the Startup Repair tool it still does this. Advanced Startup Repair option... He always does this. I can using the startup option GET advanced a command prompt. The restoration of the system there is no restore points, and there is no image backup, anyone anyideas?

  Hi pete4740,
   
  Try these steps and check the result.
  Step 1: Start the computer with the Vista DVD to start the Windows recovery environment (WinRE)
  a. put the Windows Vista installation disc in the disc drive, and then start the computer.
  b. press a key when you are prompted.
  c. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  d. click on repair your computer.
  e. click the operating system you want to repair, and then click Next.
  f. in the System Recovery Options dialog box, click command prompt.
   
  See Repairs to the system of Windows recovery environment
  Step 2: On the command prompt, try the following steps to rename the Pending.xml file and modify the registry
  a. type cd C:\windows\winsxs, and then press ENTER.
  Note: C: is the letter of the drive where Windows is installed.
  b. type ren pending.xml pending.old, and then press ENTER.
  c. type regedit and press ENTER.
  d. Select Computer\HKEY_LOCAL_MACHINE
  e. on the file menu, click on load the hive.
  f. find the following folder: C:\windows\system32\config\components
  g. When you are prompted for a name, type Offline_Components
  h. in the registry editor, locate and delete the following registry subkey:
  HKEY_LOCAL_MACHINE\Offline Components\AdvancedInstallersNeedResolving
  HKEY_LOCAL_MACHINE\Offline Components\PendingXmlIdentifier
  i. exit the registry editor.
  j. at the command prompt, type exit and hit enter to quit the command prompt.
  k. remove the Vista DVD and restart the computer.
  l. check if the system starts fine.
   
  Important: Modifying the registry incorrectly will cause serious damage on Windows. Back up the registry before you edit it.
  See Back up the registry

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updates will not charge they have not properly configured. error 80246007

  Response of the system is that they are not configured acorrectly. Error message refers to 80246007. I tried, but they don't always load. They interrupt to appempt at any time to recharge.

  Try the procedure described here: http://support.microsoft.com/kb/971058

  as well as the verification of the system for errors: http://support.microsoft.com/kb/929833

• Connection to the MDEX error. The data service associated with this editor is not properly configured.

  Hello world

  I just change the demand for short CRS, I added an adapter record pipeline everythings run ok and I can download data and search for data using the endeca_jspref page. But when I open the Workbench of short and tried to look at the properties, this error is displayed.

  Any sugestion?

  

  It's the new Pipeline

  

  It's the editors.xml on the APPS/CRS/config/editors_config/editors.xml

  <EditorConfig xmlns="http://endeca.com/schema/editor-config/2010">
      <EditorModule url="/ifcr/tools/pbx/modules/editors.swf">
          <!-- Default Guided Search Editors -->
          <Editor name="editors:BooleanEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:ChoiceEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:ColorEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DynamicSlotEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:NumericStepperEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:RadioGroupEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:RecordListEditor">
              <EditorConfig resourcePath="/configuration/tools/xmgr/services/dataservice.2.json">
                  <RecordsPerPageOptions>
                      <RecordsPerPage>10</RecordsPerPage> 
                      <RecordsPerPage>25</RecordsPerPage> 
                      <RecordsPerPage>50</RecordsPerPage> 
                  </RecordsPerPageOptions>
              </EditorConfig>
          </Editor>
          <Editor name="editors:SliderEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:StringEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:StringMapEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <!-- Experience Manager Editors -->
          <Editor name="editors:BoostBuryEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DebugEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimensionListEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimensionSelectorEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimvalListEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:GuidedNavigationEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:LinkBuilderEditor">
              <EditorConfig>
                  <host>localhost</host>
                  <port>15002</port>
                  <spec></spec>
                  <searchKey></searchKey>
                  <rollupKey></rollupKey>
                  <matchMode>allpartial</matchMode>
                  <imgUrlProperty></imgUrlProperty>
                  <properties>
                  </properties>
              </EditorConfig>
          </Editor>
          <Editor name="editors:RecordStratificationEditor">
              <EditorConfig resourcePath="/configuration/tools/xmgr/services/dataservice.2.json">
                  <RecordsPerPageOptions>
                      <RecordsPerPage>10</RecordsPerPage> 
                      <RecordsPerPage>25</RecordsPerPage> 
                      <RecordsPerPage>50</RecordsPerPage> 
                  </RecordsPerPageOptions>
              </EditorConfig>
          </Editor>
          <Editor name="editors:RichTextEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:SortEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:XmlEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
      </EditorModule>
      <GlobalEditorConfig></GlobalEditorConfig>
  </EditorConfig>
  

  Hi all, I'm here to say that I found the problem on the dataservice.json it is located in APPS/CRS/config/editors_config/services/dataservice.json, the CRS app uses a key repositoryId, rollup and I added a few records that do not have this property if when the CRS app tries to make the group by using this key, it fails.

  Best regards!

• Repeat me udate was not properly configured for Windows Vista update (platform) _

  It is after it is downloading and restarting the computer.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• The "NVIDIA nForce 10/100 Mbps Ethernet" network card is not properly configured to use the IP Protocol on my HP vista.

  Initially my HP a6683w said that nvidia network controller experienced pilot or hardwear related issues, then NVIDIA had me download something and then restart my computer to see if the internet was starting to work again. Now, I restarted the computer and is trying to say that the adapter NVIDIA nforce 10/100 Mbps Ethernet have driver or hardware related issues. I want to just my internet to work again. How can I fix it?

  Hello

  1. have you made no hardware/software changes before the show?

  2. using an internet connection wired or wireless?

  3. are you a specific error message while trying to go online?

  Follow the steps mentioned below

  Method 1: Restart the computer using safe mode with active network.

  a. restart your computer.

  b. When you see the logo of the manufacturer of the computer, press F8.

  c. the display Advanced Startup Options , use the arrow keys to select Safe Mode with networkand press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  Now check if you are able to connect to the network, if the problem persists, follow the next method

  Method 2:

  Follow the steps mentioned in the link and check with the question.

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  Method 3:

  Download and install the drivers from http://www.nvidia.com/Download/index.aspx?lang=en-us link with the question checking.

  It will be useful.

• The 'Wireless Network Connection 3' network card is not properly configured to use the IP protocol

  I can't connect to any internet. I'm trying to connect to wireless hotspots, but it tells me that I am connected with limited access

  Hi idkmyname

   

  1. What is the exact error message displayed when you try to go online?
  2. do you have updated the network card drivers installed?
  3. What is the brand and model of the computer?

   

  Method 1:
  You can check the links below and check out them if the steps to help you resolve the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  You can also check the help links below-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Method 2:
  You can follow the steps below to check the NIC in Device Manager. I suggest you to uninstall and reinstall the NIC drivers and check:

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  Check if you have any exclamation point beside the devices listed. If you have, then there is problem with the card is installed.

  c. in the NIC, expand adapter, right click on the devices listed and then click Uninstall.
  When you are prompted to confirm that you want to remove the device, click OK.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically. Check after this procedure if you are able to get access to the network.

   

  If you get all the drivers related errors, you can check if you have the latest drivers updated, installed for the network card. See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  I hope this helps.

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

• Re: Dynadock not able to properly configure external monitor

  Dear Sir/Madam,

  I found a problem with my Dynadock (PA3541EY1PRP) in the terms that he is not able to properly configure the monitor (LG Flatron E2250V-PN).
  I would clear my PC works under win 7 64 bit.

  Thank you very much for your support.

  Concerning
  MAx

  Hi dude

  I think that the people here in the forum would be able to help you if you provide more details on this topic

  you know what I mean?

• "Windows updates were not be properly configured and restoration of changes." The computer freeze

  I have a laptop Dell inspiron 1501 with windows vista on it.

  I don't have the disc of windows Vista DVD you are referring to, I have never recived a Dell I bought the computer on the internet with vista already installed.

  My problem is that, with respect to the windows updates, I get a message saying "Windows have been developed to date not be properly configured and restoration of changes". I have 51 updates pending, 47 of these updates is equivalent to 170 MB.

  As a result of these updates, I think it's the cause of my freezing computer once I have connected and I have to restart only having do not 2 - 3 times.

  When the computer "freezes" the cursor does not move throughout the scene, none of the keys works, including Manager tasks etc., the only thing that works is to turn the computer off. Sometimes, there is a beep, beep once the computer crashes.

  Over 95% the updates I have try have 'no '.

  I'm lost as how to how to repair?

  All good suggestions welcome to solve this problem, the simpler the better... I don't want to have to buy a new computer... If I won't Dell... and I'll have to get the windows disc... most solutions here seem to require it...

  Hi AL0001,

  Run the chkdsk command to check that there are no problems with your hard drive. To run the disk check, follow these steps:

  1. Restart your computer and immediately press the F8 key until you reach the menu Advanced Boot Options.
  2. Select Mode safe mode with command prompt.
  3. At the command prompt, type chkdsk/r (there is a space between the k and /)

  Meanwhile, check the Dell website to see how you can get a recovery disk in case you need to recover Windows.