Double layer reader?

Similar Questions

• Qosmio E10: The drive only reads DVD-R double layer / DVD + R

  Hey all,.
  I was wondering if someone could forward that request to the person responsible slimdrive firwmares to Toshiba.
  He finds that the carpet * a UJ-830 s drive not reading DUAL LAYER DVD-R / DVD + R (although it reads DVD-ROM OK DVD9).
  This disc, Mat * a UJ - 830 s equips the Qosmio E10.
  I have searched everywhere for a firmware update without success, so Toshiba are my only remaining chance.

  There is an update of the firwmare in of the Qosmio E10 driver section but that's UJ - 831S (and it does not work on UJ-830 s) :/
  Thanks for reading.

  Alcahest

  Hello

  AFAIK this unit has a DVD Super Multi drive and it must use media suite:
  CD-ROM (Read) CD - R(read/write) CD - RW(read/write) DVD-ROM (read)
  DVD-R(Read/Write) DVD - RW(read/write) DVD + DVD + R(read/write) RW(read/write) DVD - RAM(read/write)

  In addition, these speeds are available:
  Maximum speed CD-ROM(24x:read) CD-R(24x:write) CD-RW(10x:write) DVD-ROM(8x:read)
  DVD-R(8x:Write) DVD - RW(4x:write) DVD + DVD + R(8x:write) RW(4x:write) DVD - RAM(3x:write)

  Maybe this drive can t use the double layer? I think he uses a normal DVD

  Good bye

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• COMBO DVD DRIVE DOES NOT READ THE DVD DOUBLE LAYER

  DEAR MEMBERS

  V HAVE DELL OPTIPLEX 330 PURACHED SYSTEMS. WHEN V TRIED TO RUN MAGZINE OF FIGURES AND OTHER DVD DOUBLE LAYER ON IT. DVD PLAYER DID NOT READ THE DVD SAID. WE HAVE REPORTED THE MATTER TO DELL. BUT AFTER HAVING REPORTED THE MATTER TO LONG-TERM DELL, NO SOLUTION HAS BEEN GIVEN BY THEM

  PLS COMMENT

  URS

  SGUPTA

  
  

• M60-182: can it read/write DVD-R double layer?

  I couldn't find any list of the supported media types in the specs, the model of dvd player is mast * a dvd - ram uj-840 years

  To drive specifications, it should be possible to write on DVD + R double layer 2.4 x max
  Usually, you should find a tested and compatible media information in the user manual which must be preinstalled on your laptop.

• Problem reading disc double layer, DVD player

  Windows DVD Maker burned fine on my drive of Verbatim DVD + R double layer.  But he won't play in any dvd player, we have.  Also tried to play in our portable dvd player and the PS3 with no luck.  What Miss me?  The 4.7 GB DVD works fine at our DVD players.  Thank you

  Thanks for your reply KSib.  I had the dvd recorded in the standard wmv file that windows saves in, which is very good.  But if you try to go to where you saved it on your computer and try to write on a double layer dvd, it is write it, but don't allow you to watch on your computer or another computer... not on a dvd player.  The only way to be able to play the DVD double layer on a dvd using Windows player is to burn the Windows DVD authoring application DVD (not the location to save to your hard drive).  It takes forever to burn, of course... but so well worth it in the end when he actually plays.

  Yay for me!

• By Satellite Pro S300 uses double layer DVD burner

  Hello

  Sorry for my bad question, but I have a DVD burner double layer on my Satellite Pro S300?
  THX

  Hello

  Do you have your read the user manual?
  In manual mode, you will find information on the CD/DVD drives properties;

  Always is that the Satellite Pro S300 series was equipped with different CD/DVD drives
  TEAC DV-W28S and Panasonic UJ870 are readers of DVD super multi and support media Double layer + r.

  You can also find more information on the CD/DVD drives that are installed by using the Nero Burning Rom. There is an option that shows you all types of CD and DVD that is compatible with the internal SIDE

• While a Qosmio - Blu - ray player plays not double-layer disc BD - 50

  Hi guys

  I have an all-in-one computer with a blue-ray player, and I can't read the disc double layer BD - 50, but the BD-25 single-layer so thin.

  Can anyone help?

  Seems his disc is not compatible.
  Have you tried different disc double layer BD-50 from different companies?

• HP ENVY 17-R102NL: dvd burner double layer HP ENVY 17-R102NL

  Hello

  I would like to know what kind of burner is installed in HP ENVY 17 - R102NL laptop computer?

  What is the burner model number?

  It is a DVD burner double layer RW-/ + or not? or another type?

  Thank you

  From the Manual:

  Fixed optical drive, Series SATA, DVD +/-RW Double layer SuperMulti Supports zero power optical drive Supports M-drive 9.5 mm tray loading

  Optical drive DVD +/-RW Double layer SuperMulti 813784-001

  So yes, it will read and burn supports double layer.

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite Pro U200 - does support the DVD double layer?

  Hello

  Does anyone know if engraver of DVD of Satellite Pro U200-PLUA1E-02802QS4 supports the dual layer option?

  Kind regards
  CCBC

  Hello

  It s dependent not portable, it s according to the reader that supports double layer DVD or not! ;)

  To check the properties of your drive, for example with Nero. There you can see what are the types of discs, you can use in this drive.

• DVD - Rom SD-M1712 is able to burn discs double layer?

  Hi, I have a pc compaq, with toshiba dvd players. DVD - rom SD-M1712. I have windows xp. I was doing a holiday film that is too big to go on a 4.7 GB dvd + r disc (which I have done before) so I thought that I had nothing better to do that to buy a larger drive so I bought a pack of 10 dvd + r dl discs. The drive does not recognize them and I don't know if it's because they are double-layer.

  I don't know what that means in terms of anyway, but don't understand why it won't work.

  Can anyone help. Karen

  Hello

  I googled around and found this page on the SD-M1712:
  http://www.Toshiba-Europe.com/storage/lib/library/SD-M1712.PDF

  I agree with the first answer user. You must use the compatible player if you want to burn and read discs double layer (DL)

• Problem DVD double layer on satellite A210-15

  Hello
  I have a satellite A210-15 and cannot read dvd dual layer, I a reading of dvd double layer and then nothing, the dvd player don't know the dvd.
  My sister has the same laptop that me and him it's ok.
  Can you help me.

  What is dual layer? Do you mean Double layer?

  Some software such as iTunes and Easy CD Creator can lead to conflicts of CD Driver filter. Try this fix:
  http://support.Microsoft.com/default.aspx?ID=314060

• Material of DVD and DVD - RW double layer

  I currently have the equipment following in my computer to read and burn the DVD.
  1.) HL-DT-ST DVD +-RW GSA-H73N ATA Device
  2.) TSSTCORP CDRWDVD TS-H493B ATA Device

  This material will allow me to burn it to a DVD + R DL (dual layer DVD 8 GB)?

  Thank you
  KJFK

  Hello

  Specifications: HLDS GSA - H73N drive Drive User Guide - specs say it will be
  http://support.euro.Dell.com/support/eDOCS/storage/P153464/en/specs.htm

  Specifications: TSST TS-H493B CD-RW/DVD-ROM Drive User Guide - will be read/read but not write double layer
  http://support.euro.Dell.com/support/eDOCS/storage/P135764/en/spec.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem during construction on a double layer dvd

  Hello! I made a dvd of my vacation with yet, but it was so big (6.62Go) I bought a double layer dvd to build. I have a video set as first game and 3 menus that are auto-activées when we choose a different button (as in the tutorial but linda.com I put a video on the background instead of an image).

  When I start to build, the writing is good but to roughly a little more than one-quarter, still ejects the disc. I tried to read the dvd on my computer and a dvd, but he could not read. Please help me as soon as possible. I worked on this project for several days and I am very proud of the result. I want to really over!

  I use the most recent updated even on a 64-bit windows computer 7.

  I did everything and it did not work

  I'll take that as a 'no' to my question.  So I would simplify to see if you can sort out what works and what is not. Rather than mess with what you have, I create a new project, add a menu, use no autoactivate and no introductory video and import one of your videos as a timeline and just a link.

  Does it work?

  I would try each of the main items that John described too.

• Double layer DVD burning does not

  The double-layer DVD burning does not work on my XPS420 w/vista.  The drive reads everything good and burns only 4.7 GB very well.  When you try to burn to a disc double layer blank he Burns half of the project (probably a layer), and then gives me an error message.  This happened with two different software.  Once with Roxio 10.1 included with the system and once with DVD Shrink.  I use an ISO image file appropriate.  My Player recognizes a disc blank double layer with 8 GB of free space.  During the burning process is when all else fails.  I downloaded the update of the firmware as well.  My thought is that it may be a media problem.  I virgins, disc double layer 8.5 GB DVD + R DL.  It's a brand off I've not heard of, but that was all that was available at the store.  It is a toshiba player, not sure of the model number.  16xRW +-.  Note: the front of the drive said no DL.  If all goes well they installed the correct drive.

  any thoughts?

  Thank you.

  Message edited by voiron on 2008-05-15 10:45