Download Help after reinstalling windows.

About 1 year, I bought ADOBE DESIGN STANDARD. It worked fine until the last week my computer broken and we had to reinstall windows and everything else. I want to download again Design Standard, but could not find a download link. What can I do?

Hailoo what version of design standard you are wanting to download?  You can find links to the installation files for the majority of Adobe Creative software titles to other downloads.

Tags: Adobe

Similar Questions

  • Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

    I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

    All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

    Click Start, right click computer

    Click on properties

    Scroll down to the Windows Activation

    Click on the link change product key

    Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

    COA certificate of authenticity:

    http://www.Microsoft.com/howtotell/content.aspx?PG=COA

    ??

    What is the certificate of authenticity for Windows?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  • HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

    Hello

    I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

    Judging people, see if they install.

  • How can you recover files, folders, software and drivers after reinstalling windows xp family?

    original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!

    When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.

    Root\systems32\hal.dll Windows prevented windows from opening.  My machine in a Dell dimension 8300.

    On a Dell website, I found a method of recovery if you can reinstall windows xp from cd.  I was able to do it, but lost all my files.  How can I recover all my fortune, images, software, drivers, etc.?  There must be a way to extract this information from the hard drive.  Any help is the material and can save my marriage!  Thank you.

    Hi MarkS_02127,

    Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.

    I hope this helps.

  • No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

    No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

    Hello

    Know what type of network card you have and download the drivers of its supplier.

    It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • How much time after reinstalling window 7 32 Home Premium it take before that receive updates?

    * Original title: update Windows 7

    How long after reinstalling window 7 32 Home Premium does it take before that receive updates.

    Should be immediately the minute that an Internet connection is detected. I would advise that you install updates Windows Update batch well. There are about 300 post SP1 updates, more if you have reinstalled the version Windows 7 RTM.

    My recommendation would be to install updates in batches, these 5 at a time, exclude the hardware/driver updates. Avoid installing a set of updates for Microsoft Windows and Office at the same time. Also, try to install the first small updates. Avoid installing things like the .NET Framework and SQL Express updates.
    Whenever you install updates (it's a chore, but it guarantees a more reliable experience). Try to start the Microsoft Office updates for programs such as (Word, Excel, Outlook, PowerPoint).
    Another thing, try to download the updates, and then install them. When you are prompted to restart, disconnect from the Internet and restart your computer.
    To proceed with the installation of additional updates.
    If the continuous computer to become unresponsive, try the following:

    You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:
    How to reset the Windows Update components
    http://support.Microsoft.com/kb/971058
    Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:
    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
    http://support.Microsoft.com/kb/929135
    Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.
    I suggest before you stop and install the updates, disconnect from the Internet, first.
  • After Reinstalling windows 7 stopped opening PSD files.

    After Reinstalling windows 7 has stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what is the problem. And how to fix it. Thank you.

    Maybe these files have been corrupted. I can't say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?

    If so, it is very rare in my opinion. You are very unlucky. Try to reinstall photoshop. Then check that these files have been opened or not. In the opposite case. Then the only solution is a special software. I would use this program http://www.photoshop.recoverytoolbox.com/ on your site

    (it is not free but is very good and is not expensive. But in the future you will be immune to such situations. )

    So you can learn more about your problem here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-th rough-photoshop

  • Can not download apps from the trial even after reinstalling windows

    I downloaded the demo Rayman Jungle Run. After six months, I reinstalled windows and now I tried to download Rayman Jungle run again it say that I have already downloaded the trial version of this app and I have to buy to use it. Please help me.

    Hi Proshun,

    I wish to inform you that the trial version for this particular game app has expired. If you need to buy the game to the Windows store if you need to reinstall the game on the computer.

    Please post back if you have problems related to Windows and we will be happy to help you further.

  • No sound after reinstalling windows xp

    I formatted my hard drive and reinstalled Windows XP Professional.  I installed the SP3 also.  Except that now it does not even record that I have a sound card.  Reinstall, I used with sound edge and it worked perfectly, but now in Device manager there is an exclamation mark next to "Audio device on high definition audio bus." After running dxdiag, it says that there is no sound card.  Any help would be appreciated.

    After having reinstalled XP did you download and install the audio drivers?

    Download drivers

    Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - the process may vary with different manufacturers, so I can't give you exact directions.

  • Internet slowdown on a PC after reinstalling windows 7

    Thus, as part of my COMPUTER classes, I had to show I could maintain a computer. Then I took mine apart and put back together, checked it worked then wiped the HARD drive and reinstalled windows 7 ultimate 64 bit version. It is up and running now, but the speeds I get from my internet connection is incredibly slow.

    My main PC (that I'm having issues with) got up to 2 MB download speed until I reinstalled. Now, I have gone on speedtest.net and discovered that a ping takes 1074ms, I have a download speed of 0.66 Mbps and upload of 0.19. My laptop on the other hand, (both using the same network without wire in the same room on the same desktop) 30ms ping, D/L 14.97 and 0.81 upload speed. I tested it several times, making sure that the two ping the same destination, but the results are always the same.

    I reinstalled the driver wireless twice, I reinstalled the LAN connector twice and I have reset the BT homehub twice again the speed didn't get closer than two days ago. I spent many hours fishing trawl a few forums looking for advice, but I can't find any solution that helped. I tried a wired connection, I used invites them to drop and to renew the INVESTIGATION period. The only thing I noticed which seems strange to me is that neither of my a IPV6 connections.

    Can someone help with this problem?

    Hi, Will,

    Welcome to the Microsoft Community Forum.

    I suggest you check out article below and check.

    Why is my Internet connection so slow?

    http://Windows.Microsoft.com/en-CA/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

    Important notes:

    Antivirus: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Internet Explorer: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

    When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

    Let us know the result. We will be happy to help you further.

    Thank you

  • HP compaq: no sound after reinstalling windows

    After I reinstalled windows, the noise was gone, and I want to say the sound chip embedded in the computer. I tried to install all types of drivers, but nothing helped. It shows that there is no audio device. So is there some software/driver that woukld do computer see and use the chip integratedsound?

    It changes everything because the dc7800 and dc7900 use a different audio chip than does the dc5700/dc7700.

    You need this audio driver W7 for the dc7900...

    This package contains the driver for the ADI Audio CODEC high definition (HD) in desktop models and operating systems supported.

    FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45615.exe

  • Need help to reinstall windows

    Hi, I have a few little problems and I wud appreciate really any help.

    Information on the machine:

    OS: Windows 7 Home premx64, factory loaded.

    Model: HP Envy 1010sa 6

    Error 1: HDD not found in windows setup mode

    Error 2: not found portable cd/dvd drive in windows setup mode

    problems explained:

    When I got this machine, it came formatted as a drive only, as I prefer diving windows drive (100 GB) and the rest of the space (400 GB) for my other files, so I decided to create my own partition and reinstall windows. BUT when I got back to reinstall... He cudnt find my HARD drive, then I updated my bios to e.16 and made the cd/dvd drive first boot floppy and restart, now it can't even find my cd/dvd player... Please help.

    AHA GouroB, then you are in the United Kingdom, I should be able to treaties which, as I am from there myself, but I have lived in the United States during the past 25 years.  Even if we get stuck, we know where to turn to for additional assistance.

    (I could start putting the letter 'u' in a few words, just for color )

    Well I have a unit like yours, same family, but I have the i5 processor and not the i7, makes no difference to what you're trying to do.

    If my research is good that you did not buy a unit with 1 hard drive but rather 2, however the 2nd is a small solid state Msata SSD drive which is used as a Cache drive to speed up performance, he does this by using the Intel Rapid storage, and it shows on my own, which still has the original HP configuration I have cache drive & there RAID 0 on it, all controlled by the Intel rapid storage app, you can download the form where are your drivers.

    BTW, it seems that you already have the latest e.16 BIOS.

    Here is a link to a doc explaining the disk hard Setup http://support.hp.com/us-en/document/c03192147

    Here's one just on SSD drives http://support.hp.com/us-en/document/c02435719

    and if you go to your portable HP Softpaq download page you will find downloads for the Intel Rapid storage and diagnostics UEFI F2, including how to set up if you lost.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = UK & DLC = in & sw_lang = & Product = 5281365 #N642

    In my BIOS under BOOT the first 3, I have just mentioned are:

    Portable hard drive

    USB disk on key/USB hard drive

    CD/DVD ROM USB drive

    Looks like you may have removed some of the features provided with this unit, but you should be able to get them back, even if it means get the recovery media factory HP available on the same site.

    Your laptop has a Setup more complex and delicate that a single normal HDD notebook PIN without a cache mSATA drive, I think that you can be best served by returning to the configuration of HP and the addition of an external drive for extra storage.

    It really runs faster with the work disk cache.

    Now, here is a picture I took of the Intel Rapid storage technology application in my control panel

    I hope it's useful, I know you want to get there using your Microsoft Picture & if you want to keep trying to do that I understand, but I think that you need someone for you there.

    Good luck.

  • Re: Satellite A100 - after reinstalling Windows, I can't set up the WLAN connection

    My laptop is virused, a few weeks ago and my anti virus could not fight it (last AVG). I reinstalled Windows, but I can't connect to the internet.

    In my tab of network in Control Panel connections, I have a connection, connection 1394, but before I reinstalled Windows, I had another connection there beside it, a Wi - Fi connection which automatically searched for available networks. I tried unsussfully to set it up again. I read, windows help advice... but he told me my laptop should automatically find the wireless network card and search within modems wireless range. it dosent.

    Can I please get help in the right direction?

    Hello

    Hmm, you may have forgotten to install the LAN driver for the wireless network card wireless, but here you can download:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Also, make sure that the WIFI is enabled with the hardware switch on the computer laptop and FN + F8.

    Welcome them

  • HP EliteBook Notebook PC 2560p: missig drivers after reinstalling windows on elitebook p2560

    Dear support,

    After you have reinstalled windows on my p2560, I get the message of missing drivers for:

    -System base of the unit,

    -Ethernet controller

    -Network controller

    -PCI Simple communications controller

    -Unknown device

    The HW ID are:

    Base system device:

    PCI\VEN_197B & DEV_2392 & SUBSYS_162B103C & REV_30

    PCI\VEN_197B & DEV_2392 & SUBSYS_162B103C

    PCI\VEN_197B & DEV_2392 & CC_088000

    PCI\VEN_197B & DEV_2392 & CC_0880

    Ethernet controller:

    PCI\VEN_8086 & DEV_1502 & SUBSYS_162B103C & REV_04

    PCI\VEN_8086 & DEV_1502 & SUBSYS_162B103C

    PCI\VEN_8086 & DEV_1502 & CC_020000

    PCI\VEN_8086 & DEV_1502 & CC_0200

    Network controller:

    PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C & REV_01

    PCI\VEN_14E4 & DEV_4353 & SUBSYS_1510103C

    PCI\VEN_14E4 & DEV_4353 & CC_028000

    PCI\VEN_14E4 & DEV_4353 & CC_0280

    PCI Simple communications controller:

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_162B103C & REV_04

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_162B103C

    PCI\VEN_8086 & DEV_1C3A & CC_078000

    PCI\VEN_8086 & DEV_1C3A & CC_0780

    Unknown device:

    ACPI\HPQ0004

    * HPQ0004

    Could you please provide a list of links to drivers I need to install?

    Thank you!

    Hello

    Yes, that's all.

    Download and install.

    Yes the Softpaq Download Manager auto detects missing driver and auto update it.

    Concerning

  • Missing taskbar after reinstalling Windows

    Original title: taskbar is Gone

    I had to reinstall it on my computer from the hard drive replaced, now the taskbar disappeared.  How can I get that back?

    Hello

    I suggest you to go through the steps mentioned in the link and the Coachman.

    After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

    http://support.Microsoft.com/kb/318027

    See also:

    Start menu and taskbar Windows are missing after you upgrade to Windows XP

    http://support.Microsoft.com/kb/818150

    Hope this helps and keep us informed if you need help.

Maybe you are looking for

  • Trying to pull the high eltronic corresponding letter of the labor service

    Nothing happens

  • why I get buzzing on my headphones

    I have windows vista 32 bit and I get the buzz on my headphones, or when I play music. (any music from WMP or Youtube, as well as just randomly get buzzing. I plugged my speaker jack in another outlet and still the same problem. I tried also also put

  • Venue 8 Audio Pro problems

    I continued to see the videos on the way in which noise levels are good on the venue Pro 8 but the audio levels on my device are so low, that I often use using the external speakers (not always possible). Is there a solution to increase the volume le

  • UCS MINI connected to MDS9124

    Hello world: could you please help me?  How to set the port to the MDS9124 mode?  When the UCS mini connected to MDS9124.

  • Configuration of alerts

    I created a query and used "Add alert for the current request" to save it and run every day (to send me a report).Two questions:(1) I want the query to run only ONCE in the 24 hour period. However, there is no way to change 'run the query every 60 mi