Driver error. Windows 10
Hello
I have been using VMware Workstation very well, until I upgraded to Windows 10, after that, I get this error on several of my VMs, which previously used to manage USB well.
The error appears as:
The connection of the USB "device name <>" device has failed.
Driver error.
I can't use my USB device in the guest operating system that previously worked very well to point 8.1 of Windows, but I reinstalled VMware, tools, the operating system prompted and even created a new virtual machine and the problem persists, try
I also tried the USB 2.0 and USB 3.0 ports.
Is - this from there anyway for the USB device work around the host and connect directly to the prompt? The drivers are very well on the host computer. I have
I solved the problem by removing the controller root hub usb (uninstall) and also own installation VMware scratch hope this helps other people, has been a nightmare to sort.
Tags: VMware
Similar Questions
-
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Error Windows 8 DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
My phone rebooted in the middle of the night and there was a blue screen. I have no idea what caused it but I downloaded the memory dump file and got:
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
And that's all that I could understand him. I don't know what that means for the rest of the text. Here's my minidump: http://1drv.ms/1mrDTf3
Thank you!
* EDITED WITH THE CORRECT FILE
Hello
Results verified BlueScreenView WinDBG / DumpCHK.
The Bug_Check has CAUSE D1 amd_sata.sys AMD AHCI 1.2 device driver.
BugCheck D1, {e8, 9, 1, fffff880011ac27f}
Probably caused by: amd_sata.sys (amd_sata + 727f)
1. check with HP Support, their drivers and documentation online and ask in their forums
on known problems. Update the BIOS, chipset of low-level driversand on-board major
and drivers of different devices (see methods of updating the driver in the previous answer).BiosVersion = F.15
BiosReleaseDate = 04/10/2012 - update BIOS, drivers from the chipset and drivers of key devices.
SystemManufacturer = Hewlett-Packard
SystemProductName = HP Pavilion Notebook PC g6
Family = 103C_5335KV G = N L = CON B = HP S = PAV
SystemVersion = 0889110002305910000620100
SystemSKU = C9G71UA #ABA
BaseBoardManufacturer = Hewlett-Packard
BaseBoardProduct = 1849
BaseBoardVersion = 57.2FHP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/-----------------------------------------
2. make sure to run checkdisk (chkdsk):
Try these to erase corruption and missing/damaged file system repair or replacement.
Windows key + X (or right click in the lower left corner) - (Admin) command prompt
C:\Windows\System32\ >
At the prompt, type in SFC/scannow above
(There is a space between C and /)How to run the command "SFC/scannow" at startup or in Windows 8
http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html-----
Then run CheckDisk (chkfdsk/f/r)
File (formerly Windows Explorer)
Right click on drive C: - Properties - tab tools - error checking - Check
Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-driveHow to check a drive for errors with "chkdsk" in Windows 8
http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html------------------------------------------------------------------
3 a. Remove ALL power and then remove and reinstall the memory - and check the hard disk
cable if you can (can usually only check one end as appropriate).How to reinstall a desktop memory Module
http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htmThe relocation of the supply and internal data cables
http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-power-cables-data-cables.htm3 b. check very carefully the memory (see memory test methods below). Keep in mind that
tests of memory do detect all errors such as the tiny speed between memory differences
modules that appear to be identical. Thus, it may be necessary exchange modules toin different combinations and patterns.
4 use all the methods in the previous resolution of the problems and if necessary AFTER those run Driver
Check.BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."
I checked my graphics driver and it says that it is up-to-date. I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem. An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.
I also tried the Intel and HP driver update utility and told me that my drivers are up to date. However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."
I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade? Advice or opinions would be appreciated!
My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279
I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.
I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver. I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.
I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).
With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel? If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.
-
Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator. Sony supporting not - how make to identift video card in my laptop?
Press the Windows key, type in "Device Manager" without the quotes and the Device Manager select from the list that appears, or press ENTER.
In the window that appears, find graphics card and press the sign more or arrow to the left of it. It should fall down the name of the video card you have.
-
Windows XP - error Windows-No disk but only when a disc is in the drive...
I get this only when im trying to use a drive, it was working at does very well and ive tried everything I can think of, but nothing works...
It is of the complete error:
Windows - no disk
Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7cEveryone please PLEASE please help...
Thank you very much...
Hello Sweetlilwolf,
Thank you for visiting the Microsoft answers community.
I found another thread discussing this issue. Please take a look at this and there is information that has helped other people with the same problem.
Hope this helps
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.
The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.
I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.
Operating system is Vista 64 bit.
Original title: Windows Update
I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.
The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.
I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.
Operating system is Vista 64 bit.
After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.
-
I'm trying to back up my computer and so I went to back up files and attempted to save DVD RW Drie (f), then recovery (E :). Then in the form following, I clicked on next, and I get the message "the C: drive has errors" error "Windows has detected corruption of file system on C:. You should check the drive for errors before you can restore it. "I hit the" check the drive for errors and it told me that windows can't check the disk in use then I hit the schedule disk check. " and then nothing happened. What should I do? How can I save my files?
I planned it, rebooted, and nothing happened. I have tried three times now
Hey Ruffscicle
read the information on how to run the check disk at the link below vista64.com
If the first method does not work, try the other methods
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
have a Happy New Year
Walter, the time zone traveller
-
Nothing new added to comp. Got the hard drive error message and followed the instructions to fix/repair. All translations tried (almost every test suggested/memory/hard drive, etc.) could find NO problem with the memory or hard drive. Once I have pass the problem to boot/start the computer works fine! Crazy! Any sugg. would be appreciated.
Hello
· Since when are you facing this problem?
· What are the fix and repair that you tried to solve this problem?
· Outside this disk verification error, do you get any other error message?
Method 1:
I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.
· Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
· Click on continue or provide administrator credentials if prompted.
· In the command prompt window, type the following text, and then press ENTER:
· sfc/scannow
· You should see the following message on the screen:
§ Begin the analysis of the system. This process will take time.
§ Beginning verification phase of system scan.
· % Of verification complete.
· Once the scan is complete, a test to see if the problem you are experiencing is resolved or not.
For more information, see the article mentioned below.
http://support.Microsoft.com/kb/929833
Method 2:
I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.
a. click on start, then run.
b. in open, type cmd, and then press ENTER.
c. use one of the following procedures:
Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.
Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.
Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.
Note: If one or more files on the hard disk are open, you will receive the following message is displayed:
a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)
b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.
Note: If one or more files on the hard disk are open, you will receive the following message is displayed:
a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)
b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
You can see the article mentioned below for assistance.
Check your hard drive for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Method 3:
I suggest you to do a system restore. Follow the steps mentioned in the article below.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Error 0 x 80070570 when you access my flash drive using windows 7
I get an error 0 x 80070570 when you access my flash drive using windows 7, but the same flash drive works perfectly on two other PC's with Windows XP. It's frustrating because I need to backup and transfer files.
Hello1 you get an error message with this error code?
2. is it a problem with this particular flash drive only or all flash drives?
Let us run the check disk utility.
Here's how:
a. open the computer by clicking the Start button, click computer.
b. click the drive you want to check, and then click Properties.
c. click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
d. Click Start.
Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Right click on a drive in Windows Explorer, error
Hello
I hope someone can give me a viable solution to this problem with my Windows Explorer which persisted for months. I can't right click on my computer or any player it contains (C:, D:, etc.) via Windows Explorer. I tried everything I could find by Googling the problem. Outside these three methods listed at the link below, I finished the antivirus scans, deleted applications and spyware scans. Nothing fixes the problem. My biggest problem is that my C drive is an SSD, so I cannot defragment on it (or shouldn't, at least). When a drive is a click right (left click has no problems), I have error: Windows Explorer has stopped working.
I followed the three methods available here to resolve, but the problem persists:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/Windows-Explorer-not-responding/3aa32aab-defd-4c51-bcf5-cad0d046d59e
Any other ideas? Thanks for any help you can provide!
The problem may be with the nvshext.dll:
LoadedModule [179] =nvshext.dll C:\windows\system32\
Nvshext.dll (NVIDIA CPL Extension of Menu context) is a component of the NVIDIA graphics driver and can handle mode without failure.
If you have not already trying to update the NVIDIA graphics driver.
If the problem persists try ShellExView to disable nvshext.dll (NVIDIA CPL Extension of Menu context).
-
I noticed that an option in the Properties window of my Player DVD RW - under "Rip", when "Digital" is selected, there is the possibility to check a box "use error correction. I'm a DJ some of my older CD digital - ripping so I wonder if this option would be a good/bad idea? In terms to ensure the best audio Ripper without glitches or jump?
Hi Alexander,.
Activate the drive error correction means Windows Media can read CDs that contain errors if the option enable error correction is turned on. Error correction looking for points on the CD where it is unable to read and will attempt to read them again. It will not lead to inaccurate burns. This means that for the best PMR, it "use error correction" option must be selected.
Let us know if you have other questions about Windows in the future.
-
Hard drive in Windows 7 at boot error
Hello everyone, I have HP Pavilion with Windows 7 Home for 2 years now. However, since 15 days I get hard drive error when starting the mchine. I'm not able to solve this probem. Ask you to help me in this regard. -Rao nenault
What exactly do you mean by HD err?
Do you mean "no o/s found?
Or do you mean committed an error is detected in the HD? If so, it would seem that the HD was/is failing and needs replaceing
-
My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.
I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.
I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".
I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.
I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.
Don't know what I can do. Can you help us?
Original title: Toshiba S955-S5373 will not start
Hi Annaed,
Thanks for posting your query in Microsoft Community.
I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.
Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.
This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.
As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.
Windows crash hard drive - discount - locked, unlock the hard drive
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.
Hiya,
I have recently installed Windows 8 Pro, installed all of my usual applications etc..The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;"Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.I can't find a way to properly uninstall the graphics driver.At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.
Hi guys,.Looks like this isn't just me.Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.Information system;Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200CPU: AMD FX-8150 eight physical coresGPU: ASUS NVIDIA GeForce GTX 560 TIMain hard drive: OCZ Vertex 3 120 GBIt may be usefulEdit: Still not falling down, 11/02/12, 4 days
New edition;
If you still receive the error message, try the following steps;Has. try to perform a clean installation of the driver.Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.B. close all other programsIt is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.More information can be found below
Maybe you are looking for
-
Portege R500 suddenly turns off, restarts
Scared near death of my 16 month old Portege R500 running XP Pro. Symptom: It suddenly shuts down while I work - the screen turns white (black - although a fraction of a second of vertical - I think - lines), then it starts again. When it restarts au
-
Hi all! In LV 8.6, there is an example: non-linear calibration Example.vi (coins). I would do the same thing in the Vision Assistant. First of all, I find and load the calibration grid, created a non-linear modelOpen the image piece, and when I sele
-
How can I activate the AHCI on a Studio 540?
Hello I recently upgraded my pc to an OCZ Vertex 3 240 GB ssd hard drive and moved my old HDD as a secondary for the storage of music, pictures and video files. I read that using the SSD in AHCI mode will further improve the performance of the disk.
-
Issue during the ADF deployed Application access
HelloI first deployed an Oracle ADF application using 12 JDeveloper and Weblogic 12 c. My application is deployed with next success is the newspaper of JDeveloper.[12: 48:49] Application deployment...[12: 48:57] [Deployer: 149192] Operation "deploy"
-
Dear all,I'm looking for the adobe version do folio trail. I couldn't get on the adobe site, please someone help me to download is very urgent.Thank you