Driver ThinkPad E330 missing?

Similar Questions

• HP pavilion 15-n248sa: a media computer driver needs is missing on 8.1

  "Sorry I have European account.

  Hello I have a problem, I used before archlinux now I want to reinstall agaion windows 8 in my 'Hp Pavilion 15-n248sa' hp, and I have problem during the installation I get an error

  "

  A media computer driver needs is missing. It could be a driver DVD, USB or HDD. If you have a CD, DVD or USB flash drive with the driver on this subject, please insert it now.
  
  Note: If the installation media of Windows in the DVD or on a USB drive, you can remove this step. »

  I look at the google and I found that I have to change usb 3.0, USB 2.0, but I don't have this option in bios...

  Also, I tried to load sata but it seems that the sata is not going... I will be very greatfull for help.

  Sorry, that didn't work.

  Are you sure have installation media good?

  Normally, you get this error when the installation file is not complete or corrupt.

  The driver ahci for the Pentium N processor does not exist.

  You can try the one I've attached below which I derived from the chipset driver, but I think Miss me the part of it.

  However, it was what he was in for this chipset chipset driver file.

• my floppy drive A: drive / disc is missing...

  my floppy drive A: drive / disc is missing... not found... where it's going and how do I get it back... I still have the location on my lap... I use a xp media center sp3 2 k 5, I just do a fresh install, but it was gone until I did it. system also has a few other probs as tv is not on the menu in media center.

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer Dell Inc.
  System model Dimension XPSGEN5
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 3399 Mhz
  A04 BIOS Version/Date Dell Inc., 29/11/2005
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Username
  U.S. Eastern Standard Time zone
  Total physical memory 048,00 MB 2
  1.31 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 3.85 GB
  Paging file C:\pagefile.sys

  Downer on the photos based diskettes. I remember my father having a Sony camera with a floppy drive. I don't know that it seemed like a good idea at the time.

  Your tuner has worked with Media Center? Videos have already played? What format are these videos?

• The update of the BIOS in the ThinkPad E330?

  Can you please update the BIOS of the ThinkPad E330. Utility to update the BIOS gives an error "Fail to initialize a flush. The utility is not complete. "Follow this guide http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/h3uj54ww.txt, but expose the Secure Boot UEFI is running, does not boot to Windows. Creating a USB bootable from a cd bootable ISO ULTRA. With the flash does not start.

  Note of the moderator; fixed link

  Problem solved after replacing the OS!

• How to fix my computer told me windows cannot load a system driver reviews being missing or damaged

  How to fix my computer told me windows cannot load a system driver reviews being missing or damaged

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• CD/DVD driver damaged or missing. How to get the new driver?

  After working well for 3 months my CD/DVD drive does not show in my computer.  It appears in Device Manager.  Display properties Drive watch Code 39 driver damaged or missing.  Try to update driver says driver is installed and up-to-date. Said driver driver search comes with Windows 7.  How to get and install a driver right?

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7: A cd to dvd device driver I'm missing?

  Excuse me..

  I have problem with win7, the problem is that after the victory to Flash successfully make my bootable flashdisk, then I plug the flashdisk on my 110-3500 HpMini, but after starting Setup win7, a box pops - up and theres something written there that "a required cd/dvd drive device is missing... blah blah..." Is there something wrong with my HpMini? I tried to cancel the program installation and then re insert it to another usb port, but it did not work... Please help me sir... Sorry for my bad English...

  The wireless switch is on the front on the right side in the opposite of the power switch position.

  Windows Dvd installers are much more likely to become corrupt than ISO files or installers of USB. They are not indestructible and are best kept in a DVD box for safekeping.  All it takes is a simple scratch on the label of the DVD side and toast.

  Disc info you provided are identified as a Western Digital Scorpio Black SATA2 320 GB hard drive. What is the product number and the name of the product of your mini?

  Best regards
  ERICO

• Tecra A10 Running XP - drive DVD Toshiba - missing Modules

  When running a DVD Toshiba drive on these laptops we get
  "DVD player or the necessary modules for this app is missing." If the application restart does not resolve the problem, please reinstall the application.

  Yes we tried to reinstall - and Yes, we get the same message
  Yes, we can use power DVD and works - but of course there is a cost of license for this software, and we hope to avoid as the Toshiba software should work.

  Laptops were Vista but have been downgraded to XP - all drivers installed e.t.c.

  Anyone got any ideas?

  Hi Bin_Lurchin,

  After you uninstall a Toshiba DVD player, have you tried to clean your windows using CCleaner? Which is a nice tool that removes old keys registry and other unnecessary stuff.
  Check this box!

  Also, I prefer VLC media player for watching movies. Have you tested this tool?

• Re: Driver D: is missing (endangered) on Tecra A series und Vista

  How are you all?
  I have a problem, I installed a program then after installation the PC gave me an error (memory reference error) then I rebooted my PC
  And after that only he had the bad surprise, the D drive disappeared.
  I tried to use the restore CD to see if I can see it from the back, but it seemed not the C driver is here.
  I opened disk management BUT I see that drive C as NTFS, healthy and its size and next to it the rest of the size of the hard drive but with the size only, no kind of in shape, without name, not in good health, and when I try to click on it, it does not give me all the options and when I click on format it gives me an error massage as in picture next

  http://img269.imageshack.us/img269/3330/89452617.jpg
  http://img269.imageshack.us/img269/5025/capture.jpg

  Please help my D drive because all my data and I don't want to lose them if I do the recovery system because it will remove everything so it ths recovery drive missing
  How to get it back.

  How about Partition Table Doctor 3.5 PTDD?
  Check this box:
  http://www.ptdd.com/recoverylostpartition.htm

• Satellite P205D-S7802: disk problem CD/DVD; driver damaged or missing

  Hello

  DVD unit has not recognized by the operating system.
  When I open my computer the only display unit is C, there is no unit D.

  Then I go to the Device Manager to check it out, and I noticed that the DVD unit has problems, then I open the properties, and the error message is:
  'HL-DT-ST DVD RAM GSAT20N ATA DEVICE.
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing.

  First I thought it was a hardware problem, but I introduced the disc of windows vista at startup and the unit read it very well. Then I choose driver update of Device Manager and update told me that the best driver is already installed for the device.

  I tried to replace the files .sys and .info for CD-ROMs, but nothing is happening.
  What is happening, please help, is urgent I need to use my dvd device.

  Kind regards.

  Try this:

  Remove the drive from the Device Manager list CD/DVD
  access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  This is described here in the article MS knowledge base:
  http://support.Microsoft.com/kb/270008/en-us

  Check it out!

• controller driver simple communication Missing pci for windows 7

  Upgraded my PC to Windows 7 Ultimate. HP Compaq dc7700.

  Missing PCI Simple Communications controller driver.

  Hello:

  This is probably...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 3232028 & prodNameId = 3232101 & swEnvOID = 2103 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ir-46941-1

  If not, then try this...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = VC-87672-1 & mode = 4 & IDX = 1 & prodTypeId = 12454 & prodSeriesId = 3232028

  Paul

• No sound on Equium - driver corrupted or missing (Code 39)

  Hello

  My name is Fanta.
  I recently wanted to play music on my computer using windows media player, but no sound from the speakers of the laptop, I checked the Device Manager and there is a sign less next to the audio, video recorders and game when I scroll it is a yellow circle with an exclamation mark next to the audio device «Microsoft kernel wave mixer» When you try to play music my windows media player 11 it is said
  "Windows media player cannot play the file because there is a problem with the audio device. There may be no audio device installed, it can be used by another program, or it might not work properly ".

  When I try to uninstall the device and then analyze installed again it gives me an error message
  "Windows cannot load the driver for this device for this device, the driver may be corrupted or missing. (Code 39) »

  Is it possible that I can do my speakers work again if so how?
  Thank you Sam

  Hi Kamal,

  If you had a tools and Utilities CD that came with your laptop then I suggest that you check to see if it contains the necessary drivers and utilities to support for your sound card. Alternatively, you can be able to download the forms from the download from Toshiba site. You will need to specify the number of the correct model for your laptop.

  Kind regards

• CQ40 - 714br: a media computer driver needs is missing

  I tried to reinstall my windows 64-bit, but I still get the message of a driver needs media, your computer is missing. I tried to install different isos, tried to boot from usb and dvd and also I tried to download all the drivers and put them all together on USB for charging on the installation via the button in the browser. Nothing works. ):

  Hello:
  
  Have you tried using USB recovery? If not, I'll try that first.
  
  My only suggestion would be to try to re-download the ISO through MSDN account & make a bootable USB, maybe the ISO precedent has been altered somehow. I don't know if they are still working in OEM machines, regardless of the way in which download you it from.
  
  http://www.heidoc.NET/Joomla/technology-science/Microsoft/14-Windows-7-direct-download-links
  
  Concerning
  
  Visit

• my habit of working cd/dvd drive it says missing something about code 39 was working 3 days ago

  When I go to Device Manager it says windows cannot load the driver for this hardware device. the driver may be corrupted or missing. [code 39]

  Try following the steps under "Windows 7 or Windows Vista" or "Windows XP", depending on your operating system, in the following of the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• generic device driver mount is missing... I need a load down to windows vista 32 bit... Help, please

  I need a driver... I accidentally deleted... Generic Mount for windows vista home premium system... Can anyone help? Thank you...  I also think I have bad charge lo update windows... How can I understand that oput... I also have corrupt files... I need help desperately... I'm sick of the hours and hours of time lost... registry problems... I ran this scan it says that I had problems more than 230... Ugh! Help! Then I went to the internet 7 then 8 then 9 then 7 then 9 in 3 months or so by accident... my computer is all confused... does anyone have a quick fix... I need help so bad. I think my computer all Delete opf and the beginning... I have all the CDs to do / / / I have nothing important on my computer... can anyone help?

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are missing drivers and you want to reinstall Windows Vista.

  Please see the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  Before installing Windows, back up your files on an external hard drive, a DVD or CD, a USB flash drive, or a network folder.