ds8a25 device, one ata dvd Slimtype not has regconized

Similar Questions

• ATA device tsst corp dvd player not reading discs

  My dvd drivers do not read any type of dvd VIRGINS, but it plays DVDs that are written

  I have some writing his and my computer reads those them, but no vacuum

  I have a tsstcorp H493B AND I HAVE WINDOWS 7 driver
  He said of his job very well, but it is still no bed

  I have tried these things

  -uninstall the drive and install it back
  -tried the thing "fix it" and says "the disk drive is not supported.
  -also tried this

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  STILL DOES NOT WORK

  Hello

  If you have tried all of these methods, it sounds like the drive has a problem
  may be due to wear or age, they go wrong.

  "BTW, by"reading"discs, I hope you meant"burn"as a blank disc.
  cannot be read because it does nothing about it. If the unit of optical burning failed
  a black disc is not recognized or burned.

  Try the drive in another computer and try another drive in your computer.

  I hope this helps.

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• ATAPI DVD A DH16AYH ATA Device read DVD but not CD

  Engraver of CD/DVD in Compaq Presario 5010NX w / VistaBasic read any DVD but has problems with CD if I insert a music CD, sometimes it will open right and I can play music. Most of the time he just tells me to "insert a disc", usually open the status bar, but not always. If I close the drawer [or eject and close the tray] from 3 to 15 times, he finally opens the CD. Generally. Sometimes I drop and open it on my old computer Millennium, [which never fails to open the CD].  I bought a cleaning disc, but it still happens. Also, it stopped opening the tray with the manual key (1,200 works tent) and will always open with 'Eject' of the computer, but only with DVD and sometimes will open with the "eject" computer with the CD never if it is empty, so I always keep a known disc "opener" in the status bar. (if I forgot, I use a paper clip)

  I did an online search of the Device Manager for a driver update and he told me that the best software is already installed. I just need a new burner? Why is - that it will work with DVD CD not? driving me crazy. Thank you ps can not find a burner mfgr. says simply "drive SuperMulti DVD with Lightscribe" - pps I tried uninstalling the Device Manager, and then restart the computer - no change.  Haven't tried the support.microsoft.com/gp/cd_dvd_drive_problems diagnostic program no solution I came across a post from someone else who had the same problem [former position & 'uninstall & reboot' was the only suggestion on this one.]   I can't believe that it could be physical burner... why he wouldn't hesitate to read the DVD if it was a physical problem?  Help?

  Hello

  Check with Compaq Support, their drivers and documentation online and apply to the
  HP forums for known issues. Compaq can give you more information on the disk.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/

  ==================================================================

  Readers to use and this intermittent problem can be caused by wear.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Hi guys,.

  My Lenovo Y430 - drive Optiarc DVD RW AD - 7640 S ATA Device dvd does not

  Its not reading any cds/DVDs.

  Please could you help me how to fix it

  Once am put any DVD that the DVD is flashing and after a few seconds, his flashing no more.

  Mine is under WIndows Vista SP2

  I checked the CD-ROM/dvd-rom drivers in its 'active' display ' device working properly "Device Manager and registry also to 'upperclass' or 'lowerclass' settings entry just good.

  Please someone help me how to solve this problem.

  Thanks in advance.

  Kind regards

  Rambeau

  ++

  @bjawasa is 90% out of material. Lenovo ask to change your dvd - rom with a new free of charge if you have the warranty.

  You can call the help line: hindi or English speaking - 1800-3070-0010 (Toll-free) or 1800-113-324 (Toll-free)

• DVD RW drive has an error code of registry 19. I can't use the drive and it is not visible as a drive.

  My lite - on dvdrw lh-20a1l ata device does not work.  Device Manager appears with the following text:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?

  19 code means there is a driver conflict such as two devices attempt to use the same
  resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Pavilion Slimline s5-1020: DVD drive not recognized in Device Manager

  My rarely used DVD player no longer works. Here are the things I have seen/made:
  -J' updated to Windows 10. It may or may not have stopped working before the update.
  -I update Windows automatically, and everything seems to be in order there.
  -The DVD seems to be operational, insofar as you can hear it turn when a disc is inserted.
  -Setup recognizes, and it is enabled; It is not at all in Device Manager or in the file Explorer.
  Based on the things I've tried, there are indications that it may be either a hardware or a software problem (or both?):
  
  SOFTWARE PROBLEM?
  I followed these as much as possible:
  http://support.HP.com/us-en/document/c03370738#c03370738_NoDriveWin8
  http://support.HP.com/us-en/document/c03370738#c01895589_resetpower
  http://h30434.www3.HP.com/T5/desktop-CD-DVD-read-only/read-this-for-CD-DVD-drive-with-burning-Missin...
  
  -I got disconnected/reconnected the drive.
  -J' tried various DVD I knew to do.
  -I don't have to update the BIOS, given warnings.
  - Nor did I mess with registry filters.
  -J' tried to find a Microsoft Fixit solution, but the one referenced somewhere in these pages don't apply to this OS - I think it was for Win 7.  I tried MS Control Panel convenience stores, but none of them worked.
  So I can't say whether or not it is a software problem.
  
  HARDWARE PROBLEM?
  -J' have set the boot on the CD order in configuration and the desktop with Windows 7 HP Pavilion system repair disc - nothing happened, he went straight to the HD (even if I had turned off).  So that leads me to believe it may be a hardware problem after all.
  
  Do I have other options at this point, except maybe buy another drive?  And in fact if I do, it is possible that one does not work either?

  While you are not alone in this problem, here's a thread that deals with her.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/CD-DVD-drive-not-detected-after-upgrade-to-Windows-10/TD-p/5172346

  See if that helps

• ATAPI iHAS324 what is ATA DVD ROM is not responding, error code 10

  My DVD ROM(ATAPI iHAS324 Y ATA Device) no longer responds and it has an error code 10.  How can I make it work again?

  According to the testing of operating system following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Blu Ray error "Mediasmart DVD does not support playback of Blu - Ray disc on a virtual device"

  Blu - Ray has suddenly stopped playing Blu-Rays, with the error message "Mediasmart DVD does not support playback of Blu - Ray disc on a virtual device. A Blu - Ray disc must be inserted into a BD - ROM drive for reading. »

  I don't think it's a hardware problem. And I did nothing, it just happened by itself. Help, please.

  Thank you.

  HP PAVILION XX209AV

  Thomas Pellegrino

  Hi RowlandShaw,

  I saw your post and I'll be happy to help you. You receive the correct Mediasmart DVD error message? What is your product number?

  Find your product on a desktop computer number:

  http://support.HP.com/us-en/document/bph07555

  Find your product on a laptop number:

  http://support.HP.com/us-en/document/c00033108

  Thank you

• CD/DVD drive not working do not error code 41 in Device Manager

  Original title: code41

  I went to the Manager of devices-uninstalled cd & dvd, rebooted, devices are see the watch but always error code41. When I insert a music cd, the Unit looks like it is will start up, then stop? I also tried the Fix - it on the web site, still does not? Any ideas?

  Hello

  Method 1:

  Try the steps suggested in the given below link and check if this is useful.

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-doesn

  See also:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Note: In the article below try the manual steps for the removal of the filters and check if that helps.

  Method 2:

  This problem may also occur if you install a non-Plug-and-Play device driver, but Windows cannot find the device. Here are some things you can try to solve this problem.

  If the Troubleshooting Wizard does not resolve the problem, do one of the following:

  ·        If the device was removed, uninstall the driver, connect the device, and then clickScan for the hardware changes to reinstall the driver.

  ·        If the material was not removed, the driver files may be obsolete. In this case, update the driver in Device Manager. In the device properties dialog box, click theDriver tab and then click on update driver to start the theHardware Update Wizard. Follow the instructions to update the driver.

  ·        If the device is a non-Plug-and-Play device, you may need to install a newer version of the driver. To install non-Plug-and-Play devices, use Add Hardware Wizard. Click Start, and then clickRun. In the Open box, type hdwwiz.cpl.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook

  The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook... When I insert a dvd/cd he made just loads off noise and won't load anything. When I try to go into MyComputer to manually load theres nothing showing there just my local disk... one of my friends said that it mite Miss port or driver... could someone help please

  Thank you

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD is not accessible? Device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  The DVD (matshita dvd r) no longer under folders on the computer.

  Device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  When I try to update the driver it says I already have the best driver.

  http://www.pchell.com/hardware/cd_drive_error_code_19.shtml

  In fact, it worked for me.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Having too much CD/DVD programs can cause strange problems, especially if they load of parties
  themselves at the start because they will be competing for resources. This does not mean this problem
  has been caused by those, however, it is a possibility that and how much you
  have installed. Uninstall those that, like iTunes, Nero, and others who might be the cause of
  see if that helps.

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  If the player comes with your computer to check with the manufacturer of support system. If it isn't check
  with the support of the creation of DVD.

  =====================================================

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  ===================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked.  I changed my Yahoo email but can't find the field to change on my devices.  It is simply not there, what is happening?

  I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked.  I changed my password to Yahoo mail but can't find the field to change the password on my devices.  It is simply not there, what is happening?

  For some reason any change automatically if change you it online. Today, I changed my password through my office and I went to change the mail and she had already changed.

  You can try to delete your account your unit off and add it again.

• Optiarc DVD RW AD-7580 s ATA Device. My DVD wont overprinting no matter what media, CDs or DVDs!

  People of the night

  IV brought my laptop second hand. Today I went to start to move my music collection on my laptop, unfortunately my DVD player doesn't want to overlay my CD or DVD even.

  IV read if some threads here and followed some advice. IV reinstall the drive, no luck. I tried to change the registry, but when I got to the correct file, there is no upperfilters or lowerfilters. I confused and stuck, any help will be most apprecited.

  See you soon

  James

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.