Dual monitor: LCD screen + external monitor?

Similar Questions

• Inspiron 8600 LCD screen low image only shortly after switching on. image of the external monitor OK

  power outage time varies from 0 to 30 seconds power upward. Coherent picture of low very low on the LCD while external monitor displays the correct image.

  
  

• Dual monitor problems / external

  I recently bought a netbook NB200/007 and want to use two monitors (mainly for display of pictures etc on larger screens)

  It came preloaded with Windows 7 starter, after having found that the Starter edition did not support dual monitor that I've upgraded to Windows 7 Home Premium, but I'm still not yet to make it work.

  When the external monitor is connected, the netbook picks it up and sets up two monitors, but the external screen does not light (it remains in standby mode) I tried several different resolutions and also tried to use the external monitor as a single screen by selecting the option to have it as my main screen.

  If anyone has a suggestion of how I could get it to work, I would greatly appreciate.

  Kind regards.

  Hi puma325,
  install the 'value added package.
  This will add some features like "Fn + F5" for switching the display...

• Bad monitor or LCD screen cable on Qosmio X 505?

  Looking for a little help to solve my problem.

  About six months ago my web cam log if I moved the monitor back or front. A month or two later the monitor should fade a bit. I have to move the monitor to restore its brightness. The monitor will now completely black if moved. I have to close it and open the lid (monitor) completely so that he could appear at the back and it still does not work the first time... I am running an external monitor via HDMI to avoid the problem... I really need to this address.

  This sounds like a cable of the LCD screen or a monitor problem? Looking at what part to replace everything first.

  Thank you for your time.

  You know very well that this virtual path no one can say with certainty what the problem and this question must be verified correctly.
  I put t know why you don t tell us what model of laptop you have.

  Anyway, if you have the new Qosmio notebook with valid warranty I recommend to contact the nearest Toshiba service provider and let them solve this problem. Warranty will cover all costs.

• No luck with CRT/LCD button - external monitor does not display

  Hello

  I have a Dell Inspiron 700 m laptop.  When I connect to the computer to my TV (a/k/a an external monitor), hold down the "Fn" key and press F8 (the "CRT/LCD" button), my laptop screen blinks and no picture on the external monitor.  One of my friends has a Dell XPS M1210 and - through the same steps - we were able to get the same establishment to work.  Maybe someone has any suggestions for what is the problem?  Would be - it simply a matter of obsolete or incorrect drivers?  Thanks in advance for the help and suggestions.

  Kind regards

  Aranas

  P.S. to the difference of the XPS M1210, my Inspiron 700 m does not display again - when I press the key "CRT/LCD" - the box with three display options: integrated screen external monitor and both screens at the same time.  The screen just flashes to black.

  
  

• (Laptop HP-2000) White screen, external monitor works.

  (HP 2000 Notebook PC / Windows 8.1, 64-bit) Still white screen, external monitor works fine. What components could be defective? This occurred about six months ago about a week after the expiry of the one year warranty. Nonfortuitous.

  Hello

  You confirm this problem is intermittent, and now its working fine, it means that the question would be the display cable. The display cable is loose. Issue can be fixed by rebonding the display cable, if the problem persists then the display cable needs to be replaced.

  This is the only reason why I asked you in the previous post if the problem was intermittent or display changed while moving the display cover.

  This particular problem has nothing to do with the temperature.

  Kind regards

  Sumit

  I am an employee of HP

• Dual monitor second dark screen

  I use a Setup dual monitor both monitors same accurate on my pc at the same time on the same exact settings and one of the screens is much darker that the other I tried switching on the cable with no result and have searched the Internet for the past hours searching for answers with no result, any help would be appreciated , I'm completely at a loss I'm 100% sure that it is not a monitor problem

  Hello

  The mother system/card manufacturer and support of the manufacturer of video cards and devices, online
  documentation and drivers and forums would be a good source of help and information.

  These should help:

  Connect the multiple monitor to your PC
  http://Windows.Microsoft.com/en-us/Windows-8/how-connect-multiple-monitors

  Do more with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-8/multiple-monitors

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP G42-415DX: in a Setup dual monitor, perhaps armored secondary monitor white screen?

  I have a Setup dual monitor, where the laptop is tied to a 2nd monitor (TV) via HDMI. I mainly use the 2nd monitor. Can I empty the 1st monitor (laptop screen) screen, yet still use the 2nd monitor with lid open to access the keyboard?

  (I noticed with parameters changed in the Panel of Win7, I can close the lid without cutting [sleep, Hibernate or shutdown] computer and had to lower the monitor display 2nd to adapt to the screen.) But to use the keyboard, open the lid of the portable computer, which involved the 1st screen)

  Thank you

  Hi Kalad,

  I think the same as you do sometimes, especially when I watch a movie and you want that it will display on the bigger screen and the simultaneouly have the laptop screen is off.

  As you need to use the keyboard of the laptop and want the second poster only, which suggests to select the "Projector" only option in the pop-up menu by pressing the Fn + F4 key.

  & to come back again having two screens or single screen press Fn Key & F4 on your keyboard and select "Extend" or 'Unplug the projector' options respectively.

  I am an employee of HP.

  Kind regards
  Mundutha

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the lower right side of my post to say thank you! ***.

• The main screen becomes secondary in a Setup dual monitor (DVI-HDMI)

  Original title: WINDOWS PROGRAMMERS: problem with OS Windows7 not being not able change the numbers of identifiers when using multiple screens and HDMI

  To be clear... This problem is with the Win7 OS - no video card GUI that allow to change number ID display on multiple monitors.

  Problem with several screens and the use of HDMI cables substituent and #1 assuming that for its corresponding display view identifier.

  Not always ID desired.

  But there is no way to change this.

  EXAMPLE:

  Monitor is configured as primary display (ID #1) using a DVI cable

  Then I connect my SONY Bravia or my LG HDTV displays using HDMI cables, the new screen automatically takes over as the display identifier #1 and the monitor becomes identifier #2.

  -This introduces to the identifiers is not something I want, need or want to deal with every time I use several displays. And it creates problems.

  There is NO way to correct or modify the identifiers.

  Please provide a FIX as soon as possible if you have an ounce of concern for the customer service.

  The solution can be as simple as:

  GO to THE control panel - appearance and customization - display - change display settings:

  Right CLICK... on one of the displays in the window to the left of "Detect" / "identify."

  Then the OPTION 'Change display login' with a list of relevant identifier numbers according to the number of multiple connected screens.

  Click 'apply '.

  CLICK ON 'OK '.

  and Voila! View identifiers are defined.

  WINDOWS:

  We, your customers, look forward to the difficulty of Windows update that contains this fix a lot expected and necessary.

  Thanks in advance for your collaboration and concerns about our satisfaction and ease of use than the loyal customers of your software.

  Feel free to send me the BETA version of the patch when his complete: * e-mail address is removed from the privacy *.

  Hi Jean-Pierre.

  Thank you for all the information related to the issue.

  This problem may occur if the display of the configuration settings dual monitor retain the configuration. Possible reasons could be installed on the computer outdated display driver.

  1. What is the brand and model of the computer or the graphics card?
  2. Are you using double display card? Sometimes changing the display settings for the display cards might solve the problem.

  First of all, if you have a display of the map or media panel installed on the computer, go to the control panel and change the setting under multiple display change. Assign the identity number according to the status monitor, then check if it retains the configuration when you restart the computer.

  Additionally, make sure that you have installed the latest version of the display driver for Windows 7 from the website of the manufacturer of the computer. Sometimes, if the driver is not being updated, the setting may not keep the entire installation. See the link to know how to update the driver on Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please keep us informed.

• Dual monitor - determine which screen a program opens the

  original title: confusion bi-ecrans

  At my place of work they have a 2nd monitor mounted to my computer so I now have 2 of them. I don't know I like this immediately. I don't see the advantage (still, in any case) because you cannot watch two of them at the same time anyway as you can with overlapping windows. I'm always looking for left right 1 monitor, then the other.

  My question:

  I noticed that sometimes I click on a link in my browser on one of the monitors and it will open up a new page on the other monitor, so I have to swich my field of vision. I was expecting for the new page opens on the same screen as the link that pointed to it rather than the other monitor. Is there a setting that controls this?

  I use Dual monitors all the time, I don't know how I managed without, but I guess it depends on what you use on the PC

  Monitors can be placed in what position the monitor "means" provide, you can have one on the other with the right stands.

  And no there are no settings to change that monitor a links don't open the. It's win7 pre available condition had been installed the complete graphics driver and may be available if you use some graphics drivers

• Dual monitor Dell and your Sharp TV screen

  I have a Dell 3008WFP monitor and a TV Sharp LC52LE810UN of. The monitor is connected using DVI and the TV is connected using HDMI. In 'screen resolution' the recommended setting for the Dell monitor is 2560 x 1600. It is a 2 monitor. I can't double bill for work. correctly. The resolution gets blurred. The only way I can make it work is to expand the display. It has already used to work when it is used my Samsung P2770 monitor.

  I am running Windows 7 and my graphics card is NVIDIA GEForce 310.

  Can someone please.

  Hi ManajitSengupta,

  You want to hope that it is not a compatibility problem, because that could leave you a GROUND for a solution. Assuming that everyone even working on a solution. I had a few problems after the upgrade of Vista that never existed when running the Windows 7 RC on the same computer. The cause of a problem is not necessarily in a straight line between Win7 and the problem device. The only things I can think of now are the driver/software standard, tedious, technical troubleshooting. Starting by ' screens exhibit the same behavior when a simple SVGA driver is all that is installed? »

  Some device of even difficult problems have been resolved by reinstalling

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cant-use-dual-monitor-with-Windows-7-64-bit-and/58f2706d-ed89-46ab-80f1-ad677b4c1e13

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-docking-station-dual-monitor-display/2abeebc6-8015-4FB1-B948-dba5e27c9bfb

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/dual-monitor-Setup-cannot-move-Windows-from-one/e14a0b3b-8e95-4FA5-9f68-036dde61f0b6

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/multi-monitor-support-in-Windows-7-Remote-Desktop/c629d317-88c2-48BA-973a-da04a8c9d579

  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-multiple-monitors

• Dual monitor on HP Pavilion p6610f

  I would use two monitors on my HP Pavilion p6610f desktop computer.  I have two lcd monitors.   I buy a vga adapter digital and connected a monitor to the VGA in the back of the computer and plugged the adapter connected to the other lcd screen in the digital output on the back of the computer. The monitor connected to the digital output signals no signal.

  Can I use a Setup dual monitor on a pavilion p6610f using video output that is on the motherboard, or do I need an additional video card?

  Thank you

  cardsinstl

  Hello

  The monitor which does not have a DVI port?  What make and model of the monitor does not work?

  Sending a digital signal to an analog monitor won't work.

• Dual monitor - not compatible with this signal TV

  original title: dual monitor

  Hello!

  I connected my laptop to my LCD TV and chose the option to only display on the external monitor.  Unfortunately I get the error message on my TV "not compatible with this signal.  Because it does not work and I can't see I can't change all the options in the display configuration.  How can I restore my original settings so that when I connect to my TV the picture is displayed on my laptop?

  Thank you in advance for your help!

  XO steph

  Try typing the F8 key before Windows starts to appear in the start menu and select this option to start safe mode.  Make the changes to the view that you need to save and restart.  You can also try to plug an external monitor instead of your TV to see if you can see a picture then and make the necessary changes.

  "scaro013" wrote in the new message: * e-mail address is removed from the privacy... *

  Hello!

  I connected my laptop to my LCD TV and chose the option to only display on the external monitor.  Unfortunately I get the error message on my TV "not compatible with this signal.  Because it does not work and I can't see I can't change all the options in the display configuration.  How can I restore my original settings so that when I connect to my TV the picture is displayed on my laptop?

  Thank you in advance for your help!

  XO steph

• Mode Dual monitor: can I extend the main display from right to left?

  I have a Setup dual monitor with

  Main screen with desktop computer: Dell S42092

  Secondary display: Inspiron notebook.

  Is there a way to extend from left to right?  I wish I had my secondary screen (laptop) positioned on my left, not the right, which seems to be the only way that the configuration of the resolution of the screen allows you to do.  I currently configured as

  Display (2) Dell s24092

  Several screens: extend these screens (this allows me to drag from left to right, which is not intuitive if the laptop is on the right.

  If I can't do it with this configuration, this work with another monitor, type?

  Trudy-o

  My OS is Windows 7, but I've been to the screen "Changes the appearance of your poster" you describe.

  It identifies the laptop as monitor 1 and the S24092 Dell Monitor 2. It allows me to do 1 or 2, my main screen, but it does allow me to pass the identity of 1 and 2.   Therefore, any screen is my main screen, management of drag forces me out of the side right of the main screen (the great Dell) before entering the screen of the computer, which I turned to the left.  I am left handed and I smile with my left hand, and I'd rather have my secondary monitor to my left.  Is it makes sense?

  The identity is to tell you, visually, that is, whose number has no significance. The computer screen will always be 1 and the outside will be always high because you can not disconnect and because it will be the first computer find at boot.

  To put secondary (2) on the other side, press the image of monitors, monitor 2 drag it to the other side of the #1 and press apply then / adjust displays are flashing and if he succeeds, it will appear a window with a 15 seconds timer to reset the display if no one pressed the Yes button.

  Basically, you want to match the image with your configuration.

  I'm left-handed too, but use the mouse with your right hand. and I have a laptop with Vista and an external monitor (primary) to the left of the laptop.

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.