duplex - orientation (PhotoSmart 3310)

Similar Questions

• HP Photosmart 3310 under VISTA

  I recently move to a VISTA based PC. After installing the printer driver (VISTA version) on the site of it worked fine.

  However after restarting the PC the printer will more be found via SOLUTION CENTER. The printer is removed from the selection of the printer as well.

  This here a patch out to solve this problem?

  Thank you.

  Printer HP Photosmart C7280 all-in-onenot the HP Photosmart 3310 AiO Unit aims URL above.

• All-in-one HP Photosmart 3310: 2 HP inkjet printers different... same problem

  The time which was formerly set via the network apparently to I remember ever setting the time on one or the other. Today, I noticed for the first time that both of the printer are turned off as follows:

  HP Photosmart 3310 all-in-One - Time is 19:43 locally the printer indicates 19:12 (thirty minutes slow).

  HP Photosmart Premium Fax C309a series - time is 19:43 locally the printer indicates 19:35 (slow 8 minutes).

  Two of these printers previously seemed auto-sync the time on the display panel. Is it possible that my ISP has started to block the NTP port or something?

  Hmm, no, I just connected to 0.pool.ntp.org via ntpdate on my linux machine, and he was not blocked. So it's something on these printers has gone wobbly.

  Hi @tcagle53,

  Thanks for joining the Forums of HP Support with your request for time to printer.

  I understand that you have 2 printers and a HP Photosmart 3310 HP Photosmart Premium Fax, and each printer is showing incorrect. I would like to help.

  The printer usually have the user set the time and Date when the printer is in the configuration. Sometimes things like power outages or to unplug the printer can cause time to read properly.

  You can set the time to the correct time using the printer control panel.

  To set the time on the HP Photosmart 3310 device:

  

  To set the time on the HP Photosmart Premium Fax:

  1. press on the installation program button.

  2. press the button arrow down to select Preferencesand then press OK.

  3. press the down arrow button to select the Date and timeand press OK.

  I was not aware of the printers synchronization automatically at the time of the computer, but sometimes the built-in Web server (EWS of the printer) will have a setting "Synchronize with the time on the PC" that can be selected if the printer is used on a network.

  

  Once the built-in Web server is in charge there should be a tab somewhere near the top of the window.  If you click on Date and time parameters should be able to be selected on the left side. If the sync option of the printer with the computer time is available it usually a checkbox to check before you click apply. Printer not all have this option.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Photosmart 3310: HP Photosmart 3310 Solution Center

  I recently bought a new computer (windows 10).  On my old computer, I used the center of HP solutions a little with my HP Photosmart 3310 printer.  When I try to load the software on the new computer, I get the installation screen, which says: select install to begin the installation of your new HP device.  But the only option is to exit.  It is not a Setup button.  I hunted for it for hours without success.  Y at - it a setup that works, or am I just out of luck.

  Hello

  In devices and printers click right-click the printer and select remove device, then disconnect the USB if it is still attached.

  Then download and install the software below and check differences:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  Shlomi

• Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

  Hello

  My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

  Now the solution Center can not find my printer on the LAN.

  • I can connect to the printer via its IP address and see all the information about the printer and scan
  • Printing and scanning doctor can find the printer
  • Windows can see the printer and print

  But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

  I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

  I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

  Any suggestions?

  Concerning

  Hello

  Published on the website of HP software seem to be evil and not one used for your printer.

  I have notified HP to get this fixed number

  Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

  Finally download and install the following software, it's good:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  See you soon,.

  Shlomi

• NO MESSAGE ERROR SCAN OPTIONS FOR HP PHOTOSMART 3310 ALL IN ONE

  I have Windows XP and uninstalled and reinstalled the new software for the all-in-one HP Photosmart 3310, but evrytime I click scan, the scan menu comes up with 3 options, but being the 1. Select the computer the only clickable option. When I click on select a computer, it gives me the error message "no Scan option. Refer to device documentation to troubleshoot. "I had this problem before with my J3680 but solved the problem by reinstalling the software.

  Please advice.

  Thank you!

  Hello divegirlusa,

  I recommend that you try to run our utility Scan for diagnosis. The utility runs a number of tests, but especially, it performs a test designed to help with no option of scan of façade. The utility is on your product on HP.com support page, or you can simply follow this link.

• My HP Photosmart 3310 does support ePrint?

  My HP Photosmart 3310 and the HP TouchSmart IQ546t PC support ePrint?

  Hello

  The HP ePrint feature is supported only on the new HP printers, manufactured in 2012 or later... not on older models like the Photosmart 3310

  You can follow the link below, only the support of models listed the ePrint service:

  http://support.HP.com/us-en/document/c02814760

  Kind regards

  Shlomi

• Print email on photosmart 3310 problem

  I can't copy an email on my photosmart 3310 all in one. When I select print preview mode, the print preview page is empty. When I try to copy the email into a wordpad document, nothing copies the wordpad document.

  Great! I'm glad that the issue is resolved.

• -settings of the scanner Photosmart 3310

  Where the HP Photosmart 3310 stores the settings of the scanner? I am running Windows 7 and may need to reinstall my OS, but I spent a lot of time tweaking the settings that I use for scanning and hate not to be able to save them somehow so I can reinstall them without having to play the 'hit and miss' again.

  In fact, I tried to help another poster with the same problem.  They found the path itself and was kind enough to post it for everyone.  The path for you will be a little different, but it should be close.  Herethe post.

• HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

  I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

  After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

  What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

  Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

  A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

  In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

• Photosmart 3310 printing issue - apparently ink leaks and failures of alignment

  Hi, sorry to bother but I am facing a problem with an All - In - One Photosmart 3310.

  -I am running windows XP.

  -L' printer is connected to several for my private with band wifi LAN.

  N ' got no code error on the question

  -All used within the printer cartridges are genuine HP and photo paper was also 10 x 15 HP (the one provided with the packs of cartridges).

  -L' printer is a little over 4 years now and he has his crazy suddenly two days ago. The printer has not been moved or damaged, it simply sound suddenly started printing blue black & white text characters and ended with the ink.

  As I have already experienced similar problems with some other printers, I well as cleaning cartridges and lining up, but it has not changed anything. I finally changed all 6 white ink by new ones, but all the same. I cleaned again, tried to align, but once again, no possible way to achieve alignment. "Alignment failed" came out at this stage.

  Here are some pictures to illustrate because I tried several impressions to make sure it wasn't a short-term problem be resolved with cleaning or alignments: photo printer problem

  It should be noted that no two prints come out the same way, some are mainly blu, other yellow or green...

  At this point, I didn't Kow where to start with this problem. There seems to be a leak in the print head (assuming that the magenta) and another leak with the blue wire (it can not see on the pictures, located at the bottom of the left hand side, but could not get any pic suited because of the plastic on the printer cover.

  So, I'm wondering the following things:

  -What a sound suddenly went to the printer?

  -It worth repair?

  -How to proceed?

  Any ideas? Thanks in advance for reliable advice.

  Alignment is probably a failure because of the incorrect colors being printed on the page. The printer scans each line or section of the alignment page using a special sensor inside the printer and check all colors from ink and their bosses and investment. If one of them is not what the printer is expected to be, the alignment will fail. I don't know what film you're referring. But I don't think it matters, as the cause of the failure of the alignment is quite obvious.

  I don't think it's possible for you to do something to solve this problem. Take it to a service center would be a better option, cos they have the tools and the expertise and training to do such things.

  The upgrade process differs from one country to another. I'm not sure of European countries, but in the United States, you can call the support technology and upgrade to a new printer with similar features as yours. HP has TS lines for printers, which is very different from Smart Friend. You must pay any fees to call them and talk to them. If you are in the United States, call 1-800-474-6836 and choose Photosmart all-in-One printer as your product to be transferred to the printer Dept

• Photosmart 3310 prints random colors even when printing black

  Photosmart 3310 prints random colors in color, print and even when printing black.  This happens with photos, copies and printing documents.  I cleaned the print heads, ran the scan/repair software that says that the printer works fine. tried color calibration and these charts don't print correctly to match the place.  The first printed grid gray background with the nuances of roses square.  Printed low rack square pink dark only on white, there was no way to calibrate.  I put in all new inks (hp only of course), and the printer recognized them.  I have unplugged, rebooted, uninstalled, installed again.  Help, please!  Thank you.

  I'm sorry you are still having the problem with the printer. You can always review the HP upgrade program. This is where you can buy a printer refurbished at a reduced price, which will be accompanied by a full factory warranty. These printers will also be eligible for care pack extensions too.  The number for USA and Canada customers to call is 1-800-474-6836. I am adviser to this program so that know all the options that are available to them when we're under warranty.

• HP photosmart 3310

  Hello! I am with a problem that I Don t know how to solve. My HP soft and drivers are starting to give me a few problems and I decide to "Uninstall" (big mistake) I realize I could not download the drivers - then, I went to get the original cd that come to the printer, and then, on my macbook, which have OSX 10.9, said that the drivers on cd are for the former operating sistem - not compatible. I'm trying to contact suport - after that I wrote my said serials is UO warranty and free support. Can anyone help - where can I get the drivers. Thank you.

  Hi brunobruno,.

  I came across your post here not to be able to use your Photosmart 3310 with your newly improved 10.9 Mac and I think I can help you

  At this point there is no HP firmware for your printer for the 10.9 operating system, but you should still be able to use your printer with your Mac, you'll just have to take a different approach.

  You'll want to start with uninstalling the software of the printer which is already there (or at least make sure it's all been deleted because I don't see you not mentioned an uninstall in your post), then you want to follow this v10.9 OS X Mavericks: installing and using the printer on a Mac document to get the printer installed the Apple updates. Once that's done, you can print as usual (maybe a little less bells and whistles) and you can scan to follow this method in this how Scan: OS X v10.9 document.

  Hope this helps, please let me know how things are going for you!

• HP Photosmart 3310 printer. Problem with new cartridges hp 363 original.

  I live in Italy and I bought an all-in one HP Photosmart 3310 U.S.. Once the original ink cartridges were being run-out, I bought a complete set of original HP ink cartridges that are new in Italy. Now, the printer screen displays the following message: "Printer set up to use ink cartridges 02" and do not want all works. The ink cartridge, I bought was 363 (n.6 cartridges for all 70 euros!). Please let me know if there is a way to change the configuration of the printer and allow it to work with 363 cartridges instead of 02. Thanks in advance for your answer. I'm looking to pass on your instructions. Best regards. Carlo of Urso

  Of course, I can't speak for cdurso, but for my part, HP refused to help me with the reset of the region. Some representatives of the foreign customer support told me simply repeatedly that my printer was obsolete, and that I had to buy a new one. However, I found a solution very simple to my problem. I simply pulled the chip on the ink cartridge in the region that the printer has been set to, and I stuck on my new cartridge. I think that this would negate my ink level readings, but it allows me to use the printer, which now works perfectly. I just have to ignore the "expired cartridge" message I get every time I need to activate or reset it.

• PhotoSmart 3310 instal can't find network printer

  I have a HP Photosmart 3310 that works fine on my XP computer.  When I try to install it on the Windows 7 computer, it installs the drivers, and I can add a new network printer using the IP address.  However the HP All In One install program (AIO_CDB_FSW_Full_Win_WW_130_141) will NOT find the network printer (even with the static IP address).  The HP printer and scanner utilities can find and work (HPPDU & HPSDU).  the HP diangostic untility network works and finds the printer (HPHNDU).

  The problem is that with on Setup search the Photosmart 3310 it won't allow the solution Center HP open and use the scanner.  Can I make a shortcut on the desktop to program scanner?   Where and what is?

  I also tried to plug it into a USB cable and has not received much love from the Setup program.

  The issue of 'Imcomplete Install' returns after a day or two.  Again, this is a brand new computer with a clean installation of windows and Norton, HP, and Government issued smart card software.  Nothing weird.  The other computers in the House are fine.

  I found an alternative solution that works:

  I found a solution to the issue of scanner!  I installed the software VueScan from http://www.hamrick.com/ , the software is designed for high end photo editing, so it's a no-brainer for her to scan documents.  The free version works fine. If I wanted to the cost of the professional version of the $90 is nothing compared to the time I've wasted on getting the HP software to work.

  To resolve the problem of the printer, I installed the driver through windows and bypassed the HP software.  The only thing that miss me is now the ability to fax, but which can be performed directly from the HP Photosmart camera.