DV 6000 won't start, lights are on only

Similar Questions

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Inspiron 6000 - won't start Windows - Blue Screen of Death - the hard drive is Toast! Help me!

  I have a Dell Inspiron 6000 2-1/2 years, with XP Media Center.  Last night at the start, he went to the Blue Screen of Death.  I tried to restart about 10 times, each time by selecting a variety such as 'use last known good Configuration, Safe Mode, Etc.' nothing works.  Get to the point where the windows flag is waving in the wind (may be waving goodbye?) and then hangs at Blue Screen of Death.

  To make matters worse, this is the only hard drive, I have not saved for a few months and I can't seem to find my recovery/boot drive... I swear to you that I made a copy when you are prompted 2-1/2 years ago?

  in any case, I started press F12 and got to the dell diagnostic interface.  I ran the tests in the Section of the blue screen, and almost all categories of hard drives contained errors.  I tried Googling some of them and almost all of the shots indicate disk hard death is imminent.

  So, anyone have any ideas how I can:

  1 retrieve the data

  2. get Windows transferred to another hard drive (without having to buy a whole new copy)

  Any help is appreciated deeply... only 3 weeks until final and just lost a huge amount of assignments for my grad. school...

  Thank you

  Aaron

  
  

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• Desktop won't start. flashing green light

  I have a 1318NX Compaq Presario SR which will not start!  There is a green light flashing on the back of the power supply; which is normally green 110V AC is plugged into it.  I tried the trick of the Start button while not plugging the power cord... no help.  I also opened the case and carefully got rid of any power cord of all internal devices... the light turns green only when I pull the main power of the motherboard!

  I need to replace the motherboard?  Troubleshooting on hp.com site would indicate that the power supply is OK if the light is solid green.

  Thanks for your suggestions,

  Lou

  My wife's computer had the same problem several times. A solution I found that worked before was to unplug the power cable from motherboard and the power supply cable to the back of the PC and then connect the power cable and plug the motherboard power cable while holding down the power button. Scary, to say the least, but it worked, until one day I accidentally spilled the bad circuit breaker and then spend two hours trying the same solution with no luck and the Google search again. And here's what I found. It is the simpler solution even more cruel. It is simple and noninvasive and no matter how tech savvy you are. Take a blow dryer and turn it on to blow air at the rear of the power supply for a few minutes. When you see the light turn green, you're ready. It's worked for me after that it worked for a hundred others, maybe more. A look at the testimonials on this site: http://talk19.wordpress.com/2008/01/13/hp-m7088d-power-supply-led-blinks-green/. It's a shame that nothing like that appears on any site of HP. So don't waste your money on a new MoBo or PSU. All you need is dry hair of your wife.

• Pictures on a new iMac won't start - he's trying to fix the photo library after the migration of my old iMac.  The two are running El Capitan

  Photos on my new iMac won't start - get an error message after trying to fix the photo library.  I just migrated all of my old iMac a new aid of Time machine backup.  Both are running OS 10.11 (El Capitan).

  Get an error message after trying to fix the photo library.

  What does this error message say?  Photos crash or exit gracefully?

  Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?

  Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.

  Then try to open this copy in Photos.

• I just installed CC and bridge and photo shop are nice but AE and PR won't start any thoughts please?

  Could someone help me with that? I just installed CC and bridge and photo shop are nice but AE and PR won't start any thoughts please?

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• FS750T2 does not start, all the lights are green

  I have used 2 of these switches, both with the same problem:

  When I put in the power cord, all 48 ports lights are switched on (green).
  Nothing happens when I connect the switch to my modem.
  Is seems that nothing happens when I use the button reboot and/or delivered to factory settings button.
  All of a sudden (I'm not exactly after what I was doing) I saw a switch in the SmartWizard and 1 single port was green. It seems that the switch worked very well and I have installed the latest firmware. Everything went well, but after I took off the power cable and put it back again the same problem appaers. Now I can do what I want, nothing seems to help to restart the switch.

  Is there a certain procedure to reset to use the reset or factory or pushbuttons for reset?
  Anyone has an idea why the switch is not complete booting?

  Donkey other ideas are welcome, thanks in advance!

  JaapTon wrote:
  When I put in the power cord, all 48 ports lights are switched on (green).

  
  -If all port 48 LED steady green when nothing connected to it, then it seems to be a faulty hardware.

  JaapTon wrote:
  Nothing happens when I connect the switch to my modem.

  
  -Remember that the switch must not be connected directly to a modem only device. However, if it is a modem-router combo, then it is fine.

  JaapTon wrote:

  Is seems that nothing happens when I use the button reboot and/or delivered to factory settings button. All of a sudden (I'm not exactly after what I was doing) I saw a switch in the SmartWizard and 1 single port was green. It seems that the switch worked very well and I have installed the latest firmware. Everything went well, but after I took off the power cable and put it back again the same problem appaers. Now I can do what I want, nothing seems to help to restart the switch. Is there a certain procedure to reset to use the reset or factory or pushbuttons for reset?

  
  -Try to do a power reset. Here are the steps:

  a. press the reset button factory for 30 seconds, while the switch is on.
  (b) after 30 seconds, turn off the switch for 5 seconds but continue to press the factory reset button.
  c. after 5 seconds, the switch while you continue to press the factory reset button. Wait another 5 seconds.
  d. release the reset factory button. Check to see if it will boot completely.

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• New Satellite P300 won't start.

  I hope you can give me some advice. This week, I bought a new Toshiba P300 GU with Vista Home Premium. It worked fine for about 3 days, but now it won't start at all.

  Symptoms:

  * - Some LED lights blink for a second, then they stop again.
  * - No fan or drive noise.
  I tried to remove the battery and power cables and left the computer for a day before trying again. There is no difference except for a few plus-lumieres LED flashes for a second, the first time I try to start the computer. The next time I try, only a few lights flash again.

  After I discovered the startup problem I noticed that food is quite noisy. I also noticed that the machine has a small mark RENS in the plastic in the upper left above the screen. (Looks like a defect of manufacturing error or transport) You hardly notice the 1 cm small inconsistency in the plastic, but it doesn't look like a normal scratch.

  As I thought that food could be the cause of the problems because of the strange sounds, I brought the maschine to a PC technician today. He tested the food and said it was working normally, but he also said that this should not seem like that. He did not open the laptop, to not cause trouble about the Toshiba warranty.

  I bought the computer to the Denmark I wanted a Danish keyboard. However, I live in Portugal, where I use the computer. Where is the PC now.

  Do you recommend that I contact an ASP to the Portugal to fix the PC or do you propose I have return the PC to the merchant at the Denmark?

  The ASP will be able to exchange the screen and power supply that are not in the State, they must be good obviously both?

  Thanks for the tips!

  Hello

  First of all I must say I never had problems after 3 days of my new Toshiba laptop but these things happen and no manufacturing activity is perfect.

  In addition, I agree with you. I would bring the laptop to an ASP because it seems that this motherboard is defective but I do not know Mr. it's only my personal opinion, and therefore the laptop should be checked by a technician for laptop.

  As far as I know that the laptop is covered by 1 year international warranty and so I would contact the ASP in your country. Ask them if they can fix your computer laptop and if not, you must communicate with other ASP where you bought the laptop.
  I think this is the best solution because they can tell you what to do exactly.

  Good luck and I m sure that your laptop will be repaired as soon as possible.

  Welcome them

• Satellite L500D won't start

  Hello

  My Toshiba Satellite L500D won't start.

  When I start my laptop lights three on the light green left, the two on the left are not green or red. I hear the coolingfan, no beeps at startup. When I start the laptop with a systemdisk is the same, nothing happens.

  I have contact the supportdesk and they said it could be the hard drive, this seems a little strange for me because I can't begin with a systemdisk.

  I hope someone can point me in the right direction

  Buddy

  Hello

  Unfortunately on this virtual path, it is not easy to say with certainty what can be the problem.
  It will be interesting to know what you did with your computer laptop last days.
  Have you installed some day or anything that may be responsible for the issue described?

  Update the BIOS maybe?

• Desktop won't start no-of faulty power or motherboard?

  Compaq Presario SR5000/Windows 7 Ultimate 32 bit

  I had this problem for a few months - the Office doesn't turn back on when I unplug and plug it back and the green light of the power cord blinks. Based on the troubleshooting guide from HP for this flashing light, I was able to isolate the problem to the connector 24 pin main that feeds the motherboard. Whenever I got in this regard, the light was stable. Thus, the last two times I've been able to bring the office back to life by unplugging / plugging the 24 pin connector.

  This time, of the power supply does blink everything as long as the motherboard is powered but puts constant green when I get this connector.

  I tried the hairdryer mentioned here http://h30434.www3.hp.com/t5/Desktop-Hardware/Desktop-won-t-start-blinking-green-light/td-p/4467 but stuff that no longer works.

  As the POWER light turns off when I have the motherboard power and turns on when I win, I don't know which replace - block power SUPPLY or the motherboard but obviously one of them is the question.

  Power supply model #: Bestec ATX 250 12Z

  Thank you!

  Power supply failures are much more common than the failings of the motherboard... and less expensive to replace. I have a machine now sometimes, which flashes and takes a few coachig at startup if unplugged for awhile and anticipates a new power supply in the near future.

  If you check the specifications and dimensions, you can buy a replacement WHAT PSU to many points of sale, or online at places like Newegg.com or Tigerdirect.com pretty cheap.

  You could also first remove the power supply and take it to a place that makes the PC repairs and ask them to test it. I bought a tester of POWER a few years ago that saved many hours of troubleshooting.

• T41 won't start, help!

  My three year old T41 won't start. When I turn it on, the battery light comes on, I hear the fan and then... nothing. No IBM logo, so it isn't even going to BIOS. I tried to remove and reinsert the battery and this makes it grew up the IBM logo and taken to my XP login and then screen... the keyboard is locked, and there are horizontal stripes (a bit like trails caused by electric shocks on a TV screen) around the connection icon. Stop and on again, the fan noise and nothing else.

  Any help much appreciated.

  IBM T41 (model 2003), Windows XP Pro, 1 GB of ram.

  Check your PM.

  Good luck.

• MacBook won't start - completely back screen

  2015 12 '' MacBook

  My MacBook won't start. I put on various points of sale and even changed on the brick of cable and power (I have an extra).

  Nothing happens when I press and hold the power button.

  Any suggestions before I take it to the Genius Bar?

  Here is some information that might be useful.

  After I press the button for a few seconds, the trackpad does not haptic feedback, confirming that this is the start.

  However, if I press the power button once again, I get haptic trackpad. It tells me that it is on, but I always get a black screen. And if I press the caps lock key, no green light appears.

• Satellite U400-14 b turns off and now it won't start

  Hello

  just got a new Satellite U400 this week.
  Worked perfectly the first days, and then last night, it just turns off and now it won't start.

  I press the button and the row of lights beside him light up, but nothing happens that I n t even get as much as the Toshiba screen.
  I tried a lot of things. I left it plugged in all night, tried to take the battery and any results now.

  Little led lights on the bottom indicates that it is his stuffy, battery is white not orange when you press they light up only for a fraction of a second.

  The only thing I can compare it is too when a car won t start and you keep turning and turning the key, well in that case, pushing a button, and nothing happens, fans don t whir or anything...

  help please...

  Additional memory (RAM) has been installed? Try to remove a memory Module and try another memory location.

  If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.