DVD burner does not recognize blank disc
I am trying to burn a dvd - r with imgburn but the dvd player shows the dvd - r disc that I inserted is not empty, when it is. I don't know that it is a software problem. Any solution to this problem?
Updated - the problems started when I did a windows update. When I did the updates, the problem has been resolved. Apparently, the initial windows update caused the problem.
Tags: Windows
Similar Questions
-
HP Probook s 4540 DVD burner does not recognize blank disc
Hello
I have a 4540 s HP's Probook. Windows 7.
When I insert a CD or a blank DVD, it no longer recognizes.
The Player keeps just ROAR and stop.
Windows Media does not see disk space either.
I downloaded and ran this fix attempt
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
And I get
Problems found
Matthewf
Please see the document
Update Sofware reboot and try burning again
Application CyberLink PowerDVD
http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64647.exe
Software CyberLink Power2Go
-
DVD burner does not recognize blank dvd inserted
DVD burner does not recognize blank dvd inserted into the pc
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
DVD burner does not recognize blank DVDs, but will recognize blank CD?
I read through several similar messages, but none seem to have a solution to my problem. I'm NOT very technically savvy, so this is as much I know:
I have a Dimension E310
It was supposed to come with a cd burner and a dvd burner combo.
The reader says DVD R/RW RW DVD rewritable Compact Disk its Ultra Speed
I was able to successfully burn CDs from itunes, but have not been able to burn any kind of video file. In fact, when I insert a blank dvd in the drive, the computer does not recognize that everything is there.
As I said, I'm not the person most computer savvy in the world. I know how to work with my applications, but I know little about the way in which a computer is set up, so I apologize in advance if my question is ignorant, but I appreciate any help you can give. Thank you in advance.
-
DVD burner does not recognize blank DVD
I had a TOSHIBA laptop since April, and since I got it, I have not discovered how to burn DVDs on this topic.
I can watch DVDs and I can burn CDs, but if I insert a blank DVD, the laptop seems to recognize it as a CD.
The reader certainly said DVD + RW rewritable, so do I haveto format the disk or something?
Any help would be great
see you soon,
Martin
Hello
Before that you want to use on media DVD - RW try to format it before you want to burn files. If you have a problem please send us the description of the model. In this case, it is possible to find more information on the material of the unit.
-
my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty
my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty
This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems
-
SD R6372 DVD burner does not recognize DVD + R
Hey people I have a problem with my DVD writer. I bought another laptop producer but there a Toshiba ODD-DVD SD - R6372 an it worked for almost a year. now I know not what has happened, but does not recognize the drive of DVD + r. I tried DVD of 3 different manufactorers, but none worked. can you help me please?
Thank you
ANTY
Hello
Well, I don't know what can be the problem, but you can try to remove the Mr Device Manager DVD player the dvd player will be recognized again after restarting the device. However, you can check if the laser lens is dirty. If so, I propose to clean.
Good bye
-
DVD burner does not recognize a DVD + RW
I recently bought a DVD burner, after getting advice from Dell, to replace the original equipped DVD ROM (?) in my Dell Dimension 4500, so that I could record my video movies on DVD discs.
The DVD burner, I was recommended is the ASUS DRW - 2014L 1 and this was provided by one of the "registered partners" from Dell. Unfortunately, this "Registered Partner" was useless, aggressive & dismissive to all after sales help or advice, where my request on this forum for assistance or advice.
I had no trouble to record my videos on blank DVDs DVD - RW drives, but when you try to use DVD + RW discs (to use in my Sony Home DVD drive), the drive will not recognize them. Both the + RW & - RW discs are brand new Maxell disks, the RW - 1-2 x speed, single-sided 4.7 GB & the + RW 1-4 x speed, single-sided 4.7 GB.
When there is no record of any type in the DVD drive, it shows in my computer as: DVD - RAM Drive (D). When a DVD - RW disc is inserted it changes to: CD Drive (D) with an icon of DVD - RW & this is also confirmed when I check on the properties.
However, when you insert a DVD + RW and the DVD - RAM Drive (D) going to Drive (D) CD, as with the DVD - RW, no icon is displayed to indicate the drive is recognized, or it appears in the properties.
As far as I can determine from the card, the ASUS DRW - 2014 L 1 is designed for both + & - DVD.
I'd appreciate any help or advice... or am I just dumb?
Thank you
Tony
Message edited by ozwald on 10/09/2008 02:36
-
External CD burner does not recognize blank CD
I have a new CD/DVD of Memorex burner that plays very well the prerecorded CD, but when I put in a blank CD - it seems that the blank CD is not recognized. I've been reviewing newspaper and I see no evidence of an error. The default current behavior when you insert a blank CD should be to open iTunes. The focus to Itunes, but nothing else happens. In addition, the CD does not appear in the Finder or on the desktop. Once the CD is inserted into the optical drive, the unit eject button works like. (It works well with prerecorded CD) The only way to eject a blank CD's either reboot the computer or open the disk utility program and eject it from there. Disk utility seems to be the only application that knows the blank CD - although he pointed out that the capacity is 0 KB and is unitialized, and partition map and the Smart function are indicated as 'not supported '. I tried with two different brands of CDR and get the same problem.
Note that I have this problem on two new Imacs. The first is a machine of retina 27 "with 16 GB of RAM and hard drive with more than 2 TB of space remaining. The other machine is an iMac 21 non-retinienne "with 8 GB of RAM and about 500 GB left on the hard drive. Both machines are running El Capitan.
It is the 2nd optical drive Memorex who gave me this problem. I returned the 1st under warranty and has just received the replacement by mail unit this morning. I contacted the technical support Apple, which were very nice. They took me through a SMC reset, but this has no effect. Apart from them, they had no indication as to what was causing the problem. I thought that I would try to write to you, geniuses. Any ideas? Thanks in advance.
-david
Contact Memorex. I think that you have to go back and buy something else that actually works with a Mac. 2 units in a row with the same failure seems unlikely. It is more likely that they are simple not compatible.
-
DVD player does not recognize blank DVDs.
I think that my drive can write to DVDs, but it doesn't even recognize empty (when I go into my computer after burst in, nothing doesn't appear). The disc seems to turn for a few seconds, then stops. He can read the previously empty DVD that had something serious on it by someone else. Research online I found that the problem is very common.
In the properties of the drive, it says disc SAMSUNG HD160JJ/P and HL-DT-ST DVDROM GDRH10N CD dvd/drive under hardware. I'm pretty sure he can write, but I could be wrong.
Thank you in advance, I would really like to do something with all my blank CD/DVDs.This part of the drive name indicates that your drive is read-only, and cannot write DVD:
HL-DT-ST DVD-ROM GDRH10N
If you want to write DVDs, you will need to purchase an optical drive DVD - RW. MS - MVP - Elephant Boy computers - don't panic!
-
DVD does not accept blank disc in Mode without failure.
I'm trying to help an old friend whose PC can have a DURATION Packager, and she has never backed up its data. I am trying to copy and burn his pictures in safe mode and I have files waiting to be written to DVD, DVD, but does not recognize blank CD or DVD disc and said he must be added.
Any suggestion would be appreciated.
Buddy
Probably, he needs services (that you will need to run), in order to work. Which usually happen in safe mode. If it is a virus / infection, I would like to start in safe mode. networking, update the antivirus. And get something like Malwarebytes . Then update both. Then analyze the entire hard drive
-
DVD writer does not recognize 'NEW' blank DVD - r (Windows XP)
Hello
I have a question that has been annoying me a lot during the last few weeks, as follows...
I have a Dell Optiplex GX620 computer is running Windows XP service pack 3, it has a cd/DVD burner in this model (HL-DT-ST DVD +-RW GWA4164B), I used to be able to burn CDs and DVDs fine, so please respond with lol 'maybe your drive doesn't burn DVDs' as you can see in the model # it's a DVD +-RW drive.
But my problem is the following... for some reason the DVD burner does not detect the 'NEW' blank DVD - R, there is no problem of detection of blank CD - R disc and I can burn fine on the CD - R. But for some reason it does not detect blank DVD?
When I put one in the drive, I don't get the popup asking what I want to do etc, or to go to WORKSTATION and look a the drive it shows no media present.
I have Nero Platinum 15 installed in my burning software, which has a function of DISK INFORMATION, which also shows that 'no disk in drive '.
I have re installed Nero...
I uninstalled the drive and re installed
Re, I installed the latest drivers for Dell Optiplex
I bought a second axis of new blank DVDs
I took out what I left little hair!
Can someone provide me with a fix for this problem? ANY help is GREATLY appreciated guys!
Hello
See if that helps you.
There is a "Fix - it" Microsoft for your problem on this link
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
If above doesn't fix it, continue with the help of Microsoft:
http://support.Microsoft.com/kb/982116/en-us
See you soon.
-
Tecra M4 - DVD player does not recognize discs in Vista
Hello
After the installation of Vista my dvd player does not recognize discs!
No update XP! It was a clean install of Vista.I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.
I tried the XP disk it works fine and recognizes all.
Drivers are installed correctly no problem in Device Manager is invited.So I have no idea how to run it, seems to be a Vista problem
Could someone help me? I am really frustrated to this topic
Thanks for your help
Maybe this helps:
-Remove the drive from Device Manager CD/DVD.
-Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-Reboot the laptopBut what happens exactly? Which disks are not recognized?
-
My DVD drive does not recognize DVD game discs.
My NEC ND-4550-reader DVD - RW does not recognize DVD game discs.
He has no problem reading movie DVDs and music CDs or access data CD and DVD burnt with data on them.
I removed and let XP Reinstall the device and high-low filters removed the registry etc nothing works.
I made a copy of a DVD game on another PC and it is recognized and install my PC.
All DVD discs work very well on the other PC.
I am running Windows XP Professional with SP2.
MS Fixit controls indicate no problems.
This would be a matter of software protection?
All tried game DVDs are official records and not copies.
The NEC ND-4550 uses cdrom.sys as pilot.Finally, I replaced the drive for a new one (Pioneer DVR-S18L) and everything now works as it should.
So I suspect that it's a hardware problem and not one that can be resolved by any of the Windows settings. -
I bought plusv15 real player and it has been installed. for some reason any dvd burner does not work. A pop up comes up saying wrong disc record and replace it with a new drive. I did it three times. Real player support me staff referred to you. Windows dvd burner does not work.
Hello
I suggest you try to execute this fixit and see if it helps:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
I would also ask you to contact the manufacturer of your computer to check the updates of the firmware of your CD/DVD drive.
It will be useful.
Maybe you are looking for
-
MY mother is blind. I'm trying to find a newspaper that will talk with details of what his appointments are for him. She has dementia too, so it must be easy to do.
-
void / vi... read vi inside while loop
Hello I'm new to Labview... My main Vi keep reading data from serial port and parks (in words) in a table (put all in a while loop)... The table is also inner while loop... Now I still want to analyze this (element by elemnt) table and create an anot
-
My Acer Netbook is stolen, but I had recorded the serial number when I bought it 3 years ago. Can someone help me locate it? [subject line changed to reflect the new topic]
-
Where can I find downloading compatibility pack in order to read an e-mail from Microsoft?
original title: Windows XP and we need to update in order to be able to read a Microsoft message sent by electronic mail. How can need a compatibility pack, I get the free version of updates? We have Windows XP, and we need to update in order to be a
-
HELLO, OK, everytime I try to open a program it askes me what to open it with. This just started happening this weekend. It's as if all the EXE will not run?