DVD Maker burn only video widescreen 4:3, regardless of the report parameter l / h
I use DVD Maker and you have imported a widescreen in avi format video. No matter if I put the image 4:3 or 16:9 format DVD, it burns video part 4:3 anyway. The menu displays in 16:9, the preview plays in a 16:9 frame, menu burn in 16:9, but the video is burned in an image full screen complete with very large and skinny people!
The other parameters are NTSC and start in the menu.
What happened with a newer version of the beta version of Windows7 and now between professional.
Windows DVD Maker has a design aspect ration fault.
I created a DVD using opinion with 16 x 9 aspect ratio. When played on a DVD player connected to a 16 x 9 TV, it looks fine, but when played on a 4 x 3 TV, the video is wrinkled rather than Letterbox or cropped. Surprisingly, the DVD seems to substitute for TV or DVD settings. I created several DVDs more with different parameters and the results are always the same - test on 4 DVD players and two televisions. Then, I created a DVD with 16 x 9 and 4 x 3 content content. Not only were the 16 x 9 crushed on the set of 4 x 3, but video 4 x 3 has been extended across the 16 x 9! Yet once, either the TVs juggle parameters during the process of creating or viewing options or four DVD players has changed the results. In all cases content was stretched or crushed to fill the screen. The DVD created using Roxio Creator 9 (or similar software) with identical clips do NOT have this problem. The DVD resulting does NOT substitute devices that they are played on. I do not think that any new software should be less functional that many softwares for years, do you think?
Calogero suggestion that 'when deciding what image format to choose, consider the aspect ratio for the monitor or TV on which your slide show will be ironed' is absurd. Firstly, we are not talking slideshow - we could care less if the slides in the menu are the correct proportions - we don't talk video. Then, suppose you want to create a DVD to give to dozens or hundreds of friends and family for the holidays. You're supposed to find the type of TV each recipient? This is ridiculous. If I have 4 x 3 TV sets now but plan to get the big screen 6 months from now, you want me to redo each disc? Have you already bought or rented a DVD you have to tell them if you had a TV big screen, so they could decide what DVD to give you? Most importantly, determine what type of TV will be used does not change the fact that no amount of fiddling with the settings have an impact on this issue. The only choice you are using other software or use only 4 x 3 to be played on a 4 x 3 TV clips and clips of 16 x 9 to be played on a large tv screen.
Tags: Windows
Similar Questions
-
Windows DVD Maker-burned a video DVD reads with no sound
Windows DVD Maker video playback errors
I'm doing a movie on dvd, this used to before, but now what is happening that the sound is ok on video before I burn it but when I burned video disc has not all the sounds that it but image is perfect. When I put the audio backround with it, you can hear the noise at that, I put the disc burned 3 dvd recorders and a reader as well as the PS3 and PC, but have the same problem
I talked to the Comet, which is where I got Hp desktop and I made them aware of it and said that I installed only 1 new program on pc and it was Vanbascos karaoke software. Could that be the issue. I was told to restore the computer to its factory with rercovery drive settings and see if problem persists
Hi Uncle mango.
1. don't you restore the computer back to factory settings?
If you have not restored the computer to factory settings, we recommend that you restore the settings of Windows DVD maker to factory default settings such as audio and video filters sometimes cause this problem.
Video and audio filters are programs that are installed on your computer that help interpret video files so that they will display and play correctly. Windows Movie Maker uses them when you import video and audio.
To restore settings, try the following steps.
A. open Windows DVD maker.
B. click on tools, then click Options.
C. click on the Compatibility tab.
D. do one of the following:
> To turn off a filter, clear the check box next to the name of the video filter.
> To turn on a filter, select the check box next to the name of the video filter.
> To restore the default list, click on restore all default values.
E. restart DVD maker and burn a new DVD to check if the problem persists.When you restore the default settings, the list and the filters settings are given to the last known good setting.
For more information about burning DVDs using Windows DVD creation, see this link:
http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-MakerscReference:
http://Windows.Microsoft.com/en-us/Windows7/change-Windows-DVD-Maker-DVD-video-settings
Bindu R - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Dell Inspiron5100 WinXP SP3.
Due to malware, I had to FORMAT my HD and re-install Windows XP OEM disc. I also reinstalled WIN DVD4 from the OEM disc that came with the laptop.
Check SYSTEM/DeviceMGR/material indicates a problem with the drive, but: it won't READ a DVD or burn a CD (which she has done before)
Can't update anything of QSI as they were absorbed by COREL years. No support available for WINDVD4
When you try to run WINDVD4 with a DVD in the drive, I get a Popup of WINDVD screen that says:
CREATE OVERLAY FAILED-Please lower your color depth or screen resolution and try again. Of course, it worked fine with the reg settings in the past, now Ive tried even lower TWO the RES SCREEN and color at least registered but still does not work
It WILL play CDs of music (mp3s)
Found the following material etc.
Provider: Microsoft Corp.
File version: 5.1.2600.5512 (xpsp 080413-2108
Driver date: 01/07/2001
Driver version: 5.1.2535
Driver files
C\windows\system32\DRIVERS\cdrom.sys
"" "" \DRIVERS\imapi.sys
«"\DRIVERS\redbook.sys «»
«"«\system32\ c:\windows\system32\storprop.dll»»»
I installed and ran but it won't play MICROSOFT 'FIXIT' DVDs just run from WINDVD4 and still does not.
FIXIT now brings me HERE
It seems that FORMAT/reinstall has missed something the will allow the CD PLAYER of .1BURN and 2. READ the DVD, but allows you to PLAY CDs
From: * e-mail address is removed from the privacy *.
To: * e-mail address is removed from the privacy *.
Date: Tuesday, May 17, 2011 08:30:29-0700
Subject: QSI SBW 242 CDRW/DVD not play DVD or BURN a CD (music CD will PLAY) [AFTER the HD FORMAT and re - install}ResponseHello
1. are you able to read any type of file .doc or .txt of DVD?
After following all the steps (including the update of the MP9 for Media Player [MP] 11) below
I can get the drive to DISPLAY all the data from the DVD (Master & Commander 'movie)
on-screen MP11. He plays (automatically) the intro (ONLY) from the DVD music (as when you put it in a DVD player, forward to press PLAY) MP11 shows all of the content and all the files on the DVD and SEEMS ready to play, but pressing on PLAY don't either not anything.
2 , what exactly happens when you try to burn the CD? You get the error message?
Not nothing... He's here
3. How do you try to burn CDs?
MediaPlayer, selection of a track list, made a list of titles, and then click BURN... nothing happens
4 have you tried to play the DVD content in ? windows media player
I had not before, but now I have. Previously it was default to my SELECTION WIN DVD4 as the DVD player (I think I've EVER SEEN the WINDVD format/start page on the front screen - it wasn't the default front DVD player either but don't remember what program PLAYS the DVD, he ' comes of "). Now, go back and see 1. above for MP11 more details.
Try to update the drivers of CD-RW/DVD drive and check. Also update the graphics driver.
I did the entire bottom.
1. click on Start, click Control Panel, and then double-click System.
2 click on the hardware tab, and then click Device Manager.
If you are prompted for an administrator password or for confirmation, type the password, or click continue.3 right-click on the CD-RW/DVD drive, and then select set to update driver.
He asks if I have an OEM driver and / disk... NO.. I run the program through...
"Hardware update Wiz can not find a better match the software installed"
4. right click on the graphics card and select Update driver. »
There is no "graphics card" on the material. This machine has integrated graphics using a part of the main memory (or other) to run the video section:
I find:
AUDIO, VIDEO and GAME controllers (announcement)
Audio codecs
Audio drivers
Legacy video capture device
Media control devices
Audio Sigma
Video codecs
All this seem normal but above I see YELLOW TWO warnings under 'OTHER DEVICES '.
?! Ethernet controller "drivers for this divide (code28) is not installed.
?! VIDEO CONTROLLER (VGA Compatible) I didn't HAVE NO IDEA if THIS if APPLIES OR NOT
Device type - other devices
MFG-unknown
Location PCI bus, device 0, function 0. "Drivers for this device are not installed, CODE28 to reinstall the driver."
Has been through the usual (request for drive... Laughing out loud. Impossible to beat")
See also:
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
http://support.Microsoft.com/kb/321641
Did yesterday. It installed/ran "MR. Microsoft Fixit' with the result:
"Question: media in the CD-RW/DVD drive is not readable" CLICKED top DIFFICULTY... and after computer "worked" on this subject awhile, he says STATUS: fixed. St ill did not. MP9 introduced the format of the DVD player but don't seem to read anything other then showing a list:
UNKNOWN
Title 1
Title2
Title 3 etc., but could not do anything with this list.
He appeared a box asking if I wanted to update my MP9... sure why not so I shut everything down and uninstalled 9 and installed Media player 11.
Go BACK to # 1. now once again. This is where I am. MP11 shows all DVD data, the chart "the Album/DVD cover, all"titles"on the DVD, AND play the track audio 'intro' DVD but will not actually READ the DVD. "
So far it's PROGRESS. We are at a point where it SEEMS at least that we are ready to PLAY and MP can SEE all the info on the DVD.
I see many people on other sites of the same question: Player does not work after FORMAT operating system and reinstall of WIN (and in my case: WinXP SP3 and WIN DVD4 of OEM disc)
Thanks a lot for your help so far... I hope that we can get to the next step and get the reader of CD-RW/DVD on 'PLAY '.
-
Hi, I want to export my movie on DVD clips, burning them like AVCHD, movies are made on the basis of an iphone 6 1080 p 60. I want to keep the best possible quality. Can someone tell me what that best project settings I should use? Thank you very much.
Johnny
Thanks for the reply to my comments to complete Responses to your subject.
Factors in your planning...
First elements 13/13.1 does not support Windows XP, Windows Vista or Mac OS 10.7.
First items 10, 11 or 12/12.1 on a Windows computer is 64-bit application when it is run on Windows 7, 8 or 8.1 64-bit computer. Otherwise, it's a 32-bit application. This has implications on important it resources, particularly for your biggest projects in Premiere Elements.
Video mobile phone registered with a variable rate is a consideration for any version of Premiere Elements. If your cell phone video shows with audio out of sync and you use the hand brake to correct this condition, you should get good quality of the handbrake H.264.mp4 (just make sure that the export rate is comparable to that of the original in addition to changing the frequency of images to a number (use same as source) and selecting constant for this frame rate).
If any clarification on the above, do not hesitate to ask.
Thank you.
RTA
-
my creation of windows guard dvd stop responding and stops whenm I am trying to burn a video on dvd. the only thing that it will burn is a photo slideshow
a different view on the same subject, I downloaded the recommended free dvd burner called wondershare and it works fine. I think that one of many tbhe updates of windows, I had since the last time I was able to burn a video dvd, must have corrupted, that of why I wanted to reinstall it but can't find a download on the windows software download for it
=======================================
I don't think DVD Maker can be reinstalled, but at least
you have found a solution.If you happen to have Vista Movie Maker 6.0, you can
disable the filters inside and creating DVDs should be affected.
Reach... Tools / Options / Compatibility tab.See the following link:
Windows Vista - DVD - video burning - frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions
(scroll way the lasf FAQ):
«What can I do if am having problems with video filters in Windows»DVD Maker? »See you soon.
-
Burned DVD using Windows DVD Maker times only once on my Blu - ray player
Original title: burned dvd
When I do a cd burned with my windows dvd maker, dvd will play only once on my blu - ray player separated from the TV. It works fine the first time, but the Player cannot find the disc any time after that. I use dvd + r discs. Is there a formatting problem, or do I need to get the dvd + rw discs. I'm really at a loss. Thanks for your help guys!
Hi frapachino21,
-The problem occurs with all CD/DVD you burn using Windows DVD Maker?
-After playback of the disc on the Blu - ray drive, the drive is not detected on your desktop/computer laptop with no problems?
To use certain kinds of CD or DVD discs outside of your computer, you must close the session, which is a process that prepares the disc to be read by other computers and players.
You can try to close or finalize the CD/DVD and check if it makes a difference.
Also see the following articles:
DVD-video burning: frequently asked questions
Why my CD or DVD does not work in another drive?
Disc burning: frequently asked questions
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I made a movie in Windows Movie Maker using film 8 mm which was transferred to the files. The film came out great but when I go to 'release', or burn to dvd, it says Windows Movie Maker will save file and open it in creation of DVD to burn/publish. About halfway through the movie, there is no 8 mm video, you can see all the titles, and hear the music that I edited in but no video. I cut the video in half thinking there was too much data, I burned my movie with no other programs running, I changed all the transitions and titles in thinking that you might have a glitch. I have burned about 10 films try something different each time without success. Help!
Hi girl Jeffs.
I suggest you try the following steps:
Step 1: This question could be associated with video filters in windows movie maker:
Create a movie with reporters off and then try to publish
To turn off the filters, follow these steps:
In windows movie maker
1. click on Toolsand then click Options.
2. click on the compatibility tab.
3. to turn off a filter, clear the check box next to the name of the video filter.
See the link below for more information on the audio filters video\
http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings
Step 2: Try to reduce the speed of DVD burning in windows DVD creation and check, see the link below for the steps
Change Windows DVD Maker DVD-video settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings
For more information, see the link below
Publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows DVD Maker-is not able to get a preview of the full video
HELP PLEASE! DVD MAKER WILL NOT PLAY ALL OF THE VIDEO :( PROJECT SUUUUPER DUE SOON!
Okay, so we did a video on windows movie maker. then we went to the creation of dvd to burn it. When we saw the video on creating DVDs, it only plays the video. then when burn us it plays only this part. PWEASE HELP! I'm so lost. and I don't really feel like the failure of this project. so please help. QUICK. Youd save my life.
<>
Okay, so we did a video on windows movie maker. then we went to the creation of dvd to burn it. When we saw the video on creating DVDs, it only plays the video. then when burn us it plays only this part. PWEASE HELP! I'm so lost. and I don't really feel like the failure of this project. so please help. QUICK. Youd save my life.
<>
==================================
It may be interesting to try to publish (Save project)
in the WMV in Movie Maker format... and then importthe video file in DVD Maker WMV.It may help to open Movie Maker and go to... Tools /.
Options / compatibility... tab and uncheck all filters.
Try to view your DVD project once more...
If she is still unable to read the entire file... There may be
one or more source files in the project that are not
fully compatible with Movie Maker... several times that
Maybe a MP3 music file or video clip MPG.Or the project may be too large and/or complex
for the resources of your system. Too many transitions
and the effects can make a complex project. The fix
because it is creating small projects.Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv or dv - avi
Music - wma, wav, wmvVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I have the windows Director, went to Microsoft and tried to download Windows DVD maker but does not appear to have installed despite me try it 3 times, all I want to do is publish a movie!
On Vista, Windows DVD Maker requires that you have Windows Vista Home Premium or Windows Vista Ultimate Edition. If you have one of these versions, you should already have Windows DVD Maker and Windows Movie Maker 6.0. These versions of Windows Vista are required to have copies under license from MPEG-2 to make a video DVD.
I was not aware of a separate installer for Windows DVD Maker, so I suspect you look at something of a 3rd site part. If it is a Microsoft site, can provide you the address you use?
-
How to make a vertical video clip when it is on the side in Windows movie maker Vista
In the montage of video clips in Windows Movie Maker how do you turn a clip when veiwing on the side? Photos have an icon for the vertical flip but not video clips, I can't figure out how?
In the montage of video clips in Windows Movie Maker how do you turn a clip when veiwing on the side? Photos have an icon for the vertical flip but not video clips, I can't figure out how?
==========================================
I assume you are using Windows Live Movie Maker?
(if you use Vista Movie Maker 6... See the last article)Windows Live Movie Maker can turn a video clip, but you
may need to convert the video to a compatible format like
. WMV, before you can import it into Windows Live Movie
Maker.See the following screenshot.
Windows Live Movie Maker - rotate 90 ° right
http://www.howtogeek.com/wp-content/uploads/2010/04/sshot710.PNGAlso... the following article is maybe worth a visit:
Shoot a video of 90 degrees with VLC or Windows Live Movie Maker
http://www.howtogeek.com/HOWTO/14751/rotate-a-video-90-degrees-with-VLC-or-Windows-Live-Movie-Maker/After having shot the video... Save it in the WMV format.
How to save the project in Windows Live Movie Maker to WMV Format
http://www.YouTube.com/watch?v=ZyqZm5MBc7oAnd the following freeware can be worth a try:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Free Video Flip and rotate
(XP SP3, Vista, 7 and .net Framework 2 SP2)
http://www.DVDVideoSoft.com/products/DVD/free-video-flip-and-rotate.htm
(* You can uncheck the options to install the)
DVDVideoSoft Toolbar and iTunes plug-ins *)How to use Free video Flip and Rotate
http://www.DVDVideoSoft.com/guides/free-video-flip-and-rotate.htmMovie Maker - how to rotate a video taken from the Angle easily - XP - Vista
http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527 -
Windows Movie Maker - have 6 minutes of audio spliced, I would like to publish in the form of an audio clip with no video. I heard that this is possible, and it all works, the 'framework' includes 6 more minutes of space without air circulation that gets compiled with the planned 6 minutes of audio matching 12 minutes of audio rather than the 6 minutes. Is it possible to MovieMaker 'See' the end of my audio instend, to include 12 minutes in length with it default? Should I include photos or video for the project to publish only 6 minutes, instead of the 12 minutes? I hope this makes sense...
I assume you are using Vista Movie Maker 6 and not Live Movie Maker?
It is a problem that I've not seen before... the recorded length must be equal
at times combined clips on the timeline. I guess it's possible
If you've done a lot of editing/trimming clips... something was corrupted.I was wondering... If you import the .wma file saved in Movie Maker and drag
it to the timeline... it shows the clip as being the length of 12 minutes? If it isn't...
Perhaps you could he split and right click Delete unwanted 6 minutes and
then re-save.Divide... drag the playback at the end of the music and the type indicator... CTRL + L
.. .to split the file then right-click of the unwanted part and click on delete.Tip: Unlike clips video... audio clips can be dragged to the timeline, so don't forget
they are dragged all the way to the left to prevent air from dead at the beginning or
between the clips.It may be worth trying to go to... Tools / Options / compatibility... tab and the left click
the "All default settings" button before the Save.And... If the clips audio source are not the. WMA format... it could be a useful
try to convert them to WMA before you import into Movie Maker. -
I am running Windows DVD Maker on a Vista PC. When I start the burn sequence the coding process will continue at 40% and then the application freezes. My initial project was 125 minutes of capacity DVD 150 minutes. I tried to burn a small project in 58 minutes and successfully completed. No idea why I can't use more than the ability of the DVD? All I can do to fix this? I'm running a new HP with a Phenom x 4 processor, 64-bit, and I've got important of RAM and hard drive space available.
I am running Windows DVD Maker on a Vista PC. When I start the burn sequence the coding process will continue at 40% and then the application freezes. My initial project was 125 minutes of capacity DVD 150 minutes. I tried to burn a small project in 58 minutes and successfully completed. No idea why I can't use more than the ability of the DVD? All I can do to fix this? I'm running a new HP with a Phenom x 4 processor, 64-bit, and I've got important of RAM and hard drive space available.
===========================================
Usually a single layer 4.7 GB DVD white held an hour of high
quality video. With compression, some programs are capable of
the extension of this period. I don't know exactly what is DVD Maker
capable of in that regard I think 150 minutes it is really pushing.Large and complex projects usually cause problems. Best bet IMHO
would be to create several small projects and publish (save) each
a WMV format movie to a folder on your hard drive.Then import the WMV files collected in DVD Maker and each of them
becomes a scene (chapter), you can have up to 18 scenes.Without a doubt... video editing and DVD burning can be a frustrating business.
Good luck with your project.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Windows Movie Maker project doesn't find or burns correctly in DVD maker overview
I have created a Windows Movie Maker project, composed of many avi files (129 min) and I can see the entire project in Movie Maker, but when I go to burn a DVD in DVD maker I can only listen to excerpts from the first minutes 33 and the rest is a black screen with no audio (as if there's nothing there). Also when I burn a DVD only burn the first 33 min. I tried to publish the project to my computer in WMV format, but I get an error when I try to open in DVD creation that the file is not indexed and cannot be opened in creation of DVD. I tried to uncheck the vidoe filters and that has not worked. Help, please. I put many hours of work into this and am very frustrated.
The file is too large and complex. The best would be to create
several small projects... To each post in the. WMV or. DV - AVI
format in a folder on your hard drive. Then you can import the collection
video files in DVD Maker and each clip becomes a scene
(Chapter) on the DVD. (You can have up to 18 scenes).The following links explain how to post:
Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerThe following chart shows where the DV - AVI option.
http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpgAlso... for a project for more than two hours... There is a possibility that
You may need to use a DVD Double layer...Good luck...
-
burn a video dvd instead of data dvd
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: How can burn you a data dvd videoinstead dvd if the option is not there
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Ideas: How can burn you a data dvd videoinstead dvd if the option is not there
=========================================
For information about burning a DVD video... see the following articles:How to burn DVDs with Windows DVD Maker
http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-MakerWindows Vista - DVD - video burning - frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questionsWindows Vista - Windows DVD Maker - burn video disc
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-discWindows Vista - Windows DVD Maker
http://www.windowsvistauserguide.com/windows_dvd_maker.htmThe Beginner Guide to creating Windows DVD
http://www.windowsdvdmaker.com/guides/beginner/Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I want to make a dvd with music, pictures and possibly videos one to get their degree. Only do in Windows DVD Maker? Also, when I open the DVD maker - it does me not table storyboard or the taskbar. Help, please. Thank you
You can use Windows Movie Maker, if you want a timeline.
Storyboard and then use create DVD to burn your DVD.Windows Vista - put on the road with Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-MakerOr go straight to DVD Maker:
Windows Vista - Windows DVD Maker - burn video disc
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-discWindows Vista - DVD - video burning - frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questionsWindows Vista - change Windows DVD Maker DVD-Video settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings
Maybe you are looking for
-
How to download firesheep
-
Video will play is no longer in itunes
Hi, hoping someone can help me. After that I tried to install on my laptop Windows 8 was last updated, iTunes would open is even more. Had to uninstall and reinstall. Since then, I can no longer play any of my movies or tvshows in iTunes. I just get
-
HP Pavilion Elite e9220y: HDMI connection problem
I can't get my computer to connect to my monitor (HP w2338h) in hdmi mode. The graphics card is the original of the computer (Radeon HD 4350) that I'm looking for upgrade to a Radeon HD 6670, but I had no input (black screen) when I went from cards
-
How to access a global variable that is common between the different baskets project library
My project consist of several libraries, after generation the library project packed for each library, I find it cannot share data in a global variable between different packaged project library file. For example: packed project library #1 contains V
-
I ordered the 1 TB hybrid drive for my HP dv7 - 1237cl but I don't have the OS to Vista disk and since I'm unable to go online to HP for a upgrade for my dv7 control I was wondering if you could help me. I liked vista ok, but I like XP pro sp2 and wi