E2000 Wireless and help connect BEFVP41

I have a VPN BEFVP41 router that I use for my home software company and I have several clients who need to access the files on my server... so the VPN endpoint router. And it works very well. However, I would like to connect my laptop, PS3 and DirecTV set-top satellite Internet and bought a wireless router Linksys E2000 for this.

When I followed all the instructions, right out of the box, with all its parameters by default, I had wireless internet without problem, but did not have access to my network. I have live chat and was immediately referred to the helpline to help set up what they called a 'cascading connection '. Well, after almost 4 hours on the phone with them on 2 separate days, I now have no internet OR network connection on my E2000. It of a paperweight and sits right on the desktop. I tried to reset and start from scratch, as if I had just pulled out of the box... No, does not work.

Is it possible to use an E2000 wireless router and connect to the internet through a wired router BEFVP41? If so, how? TIA

PJO

1. make sure that the BEF is working properly. I guess that's the address LAN IP 192.168.1.1 with subnet mask 255.255.255.0.

2. it is probably best to reset the E2000 to the factory settings. Press reset for 30 seconds. Make sure that the E2000 is not connected to your network.

3. wire a single computer to the E2000. Open the web interface at http://192.168.1.1/ on the main Setup page, give the address LAN IP 192.168.1.2 and disable the DHCP server. Save the settings.

4. unplug the computer. Now one of the ports numbered from the E2000 LAN wire to the BEF. Do not use the internet port of the E2000.

That's all. Now, you use the E2000 as a simple access point and ethernet switch. The internet-related functions are done on the BEF only.

Don't forget to set up the wireless and secure the E2000 through its web interface to http://192.168.1.2/

Tags: Linksys Routers

Similar Questions

  • 7500 has perhaps both wireless and USB connected?

    I purchased a 7500 yesterday and love it so far.  The installation was very easy, but long... Everything installed correctly, but I have a question...  I do a lot of printing of pdf files, which are fairly large (file size).  My previous printer, 6210 HP, print faster than this one.  It seems that there is a long delay for the printer instructions to print...  I thought he was maybe the wireless configuration.  Can I connect directly from my desktop via USB and also have a wireless connection for my laptop and iphone?  I don't want to mess up the settings, drivers, etc...  If this is possible, should what steps I take to ensure the smooth transition?

    Thanks for any help on this matter.

    Yes the printer will support wireless and USB at the same time.

  • Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

    Original title: Internet issues

    My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

    Hello

    Welcome to the Microsoft community.

    I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

    I would like to know the details below to help you better

    1. Do you receive an error message/code when you access Web sites?
    2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

    I ask you to try the steps in the Microsoft Help article below and check if it helps.

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

    Also I ask you to reset TCP/IP and check if it helps.

    How to reset TCP/IP using the NetShell utility
    http://support.Microsoft.com/kb/299357/en-us

    Keep us updated on the issue to help you better.

  • After the Windows 7 security updates, my wireless and internet connections have been disabled

    the last batch of security updates have made all sorts of damage to my laptop, the worst was disable my wireless and wired Internet even PC world could not help saying I need new wireless card manage to restore to 6/23/2011before I do it again pack security update has any other body says the same thing it's on 24/6/27/6

    now I have no security on all the Windows Defender and Microsoft Security databases

    Ruth Burns

    * original title - securaty updates held don't need know no securty on now *.

    Hello

    ·          What security update has been installed prior to this problem?

    ·          What happens on a wired connection?

    Step 1: Start the network troubleshooter utility.

    http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

    See also: http://windows.microsoft.com/en-US/windows7/Use-Network-troubleshooter-event-logs-to-solve-network-problems

    Step 2: Try the other steps in the article below.

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  • I unchecked the "notify me when this connection is limited or no connectivity" for my windows wireless and LAN connections, but the icons still appear in sys tray when it is disconnected.

    Hello

    I use my Intel client to manage my wireless network connection in Windows XP Pro SP3. (I need to use the Intel client because it supports protocols wireless not supported by the Windows client).

    I would like to remove the icon from the system tray/notification area Windows wireless network connection and cannot find a way to do it.

    I opened the network connections, right click and choose 'properties' and in the general tab at the bottom there are two check boxes "Show icon in notification area when connected" and "notify me when this connection is limited or not connectivity ' which I disabled (I did it for my local network also), but the icons still appear in the status bar when it is disconnected.

    Any suggestions?
    Thank you
    Bob

    I found a registry change that removes the icon in the systray.  One needs only to remove these keys (save the first):

    [HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E}]

    [\DefaultIcon HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E}]

    [HKEY_CLASSES_ROOT\CLSID\ {7007ACCF-3202-11D1-AAD2-00805FC1270E} \InProcServer32]

  • Can I print from a wireless and wired connection at the same time?

    I have a wireless printer HP Photosmart Plus B209a-m running from my laptop (Windows 7 OS).

    I have an old computer which is not wireless which contains files and programs I want to print from. Continuing to use wireless for my laptop, can all I connect the printer wire (provided) to the old computer and use the printer at the same time at the same time?

    USB and wireless can work at the same time. However, if your computer is connected to your wireless router, even by the router, it can connect to a wireless printer.

  • Wireless and usb connection

    I recently bought an Officejet 6000 / e609 printer.

    My question; is it possible to use the printer wireless on a computer and USB on another computer?

    Thank you

    Sidney

    Yes, it works very well, but why?

  • Can I connect to the Deskjet 3050 wireless and LAN?

    I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

    Hello

    The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

    The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

    Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

    If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

    Shlomi

  • HP 550 wireless and Bluetooth problem on win 7

    Hello

    I had a problem with the wireless and bluetooth connection, since I upgraded to windows 7 x 64

    The problem with the wireless, it's that I can't find not all devices wireless in range (even if I have a wireless router at 2 meters far from providing internet to a laptop computer and two mobile phones)

    I tried the drivers on the HP site, but I only need to support vista x 86 drivers.

    I also tried the drivers from a previous post on this Board link here (the broadcom wireless drivers) and even if they normally show on Device Manager window, always get a "turn wireless capability on" when I solve the problem. And Yes, the light on the wireless button is in blue (not yellow)

    The other thing with bluetooth is that I get some unknown bluetooth devices on the window of device as in this photo manager.

    I have no idea what to do now so please help.

    Thanks in advance.

    Hello

    Check the guide below:

    How to install the driver Bluetooth HP Windows 7.

    You will need this driver:

    HP wireless Assistant here (ver 3.50.11.2 for 32/64-bit Win7)

    Bluetooth wireless here (ver 6.2.1.500 for 32/64-bit Win7)

  • Windows 8.1 and cannot connect to the internet even though I have full WiFi access.

    Original title: Windows 8.1 and cannot connect to internet even though I have full WiFi access-problem occurred just after working fine for over a year

    Uses Windows 8.1 for over a year with no access to the internet.  Today, I can access is no longer the internet using Explorer, Mozilla Fire Fox or store apps.  (Tried to install a game just to test the internet connection-no luck).  When I try to connect the computer just sits there with the indicator connection just spin but never passes through.  I have good indicated WiFi (Internet) access.  While they inspected the updates, the only thing that appears on the current date is some Microsoft Silverlight is.  Could that that may cause my problem?  I didn't do any changes and have no problem until today.  I'm not always well informed in this area and I am at a total loss as to how to proceed, what to check... hope someone can advise me.   Thank you, DebbieG211

    Hi Debbie,.

    You might face this problem because of wrong settings in Internet Explorer. You mentioned that you get the update of windows Microsoft Silverlight, so we can deduce that there is a problem with the Internet browser. Please write us with the following details.

    (1) do you get error messages when all websites fail to load?

    (2) what is the brand and model of your computer?

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

    You can also follow the steps in the link below for further troubleshooting. It is a tutorial to solve the problem of wireless and wired connections.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Let us know the details asked and the status of the issue.

  • Question re: Atheros AR5007 802. 11 b / g adapter and connection w/Linksys E2000 wireless router

    Help! I'm at my wit's end. I just bought a Linksys E2000 router and cannot find a way to get the router to connect wireless on my HP G60-235DX laptop (running Vista) via the WPA2 setting. I know that the Atheros AR5007 802. 11 b / g wifi adapter is the question, and I downloaded the latest driver update... and still have the same problems.

    FYI - I can connect to the computer via the internet cable from the Linksys E2000 router so I know that it is not a modem issue.

    Help... PLEASE, I BEG YOU!

    Thank you, thank you, thank you...

    Paul,

    I solved the problem! After almost return the router to Best Buy today during lunch, I decided to give it a try more tonight and again call LinkSys. After almost decided with the Linksys officer that they only solution is to put another card in my computer, we stumbled on the question.

    We have gone to 5.0 GHz to 2.4 and spent the 'auto' channel to channel 9.

    And now my computer works like a charm (thanks also to update the driver as you instructed).

    Thank you!

  • My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.

    My HP Pavilion Entertainment PC will not communicate with my printer HP 309g.  Suffice to say that they are connected to WIFI.  I have tried wireless and connected.

    GR

    Since they are both HP products you the best solution is to talk to them...

    Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • Helps connect Router WRT160N and WEP key

    Hello

    I've just intsalled the N wireless router and connected successfully all laptops except the one that runs windows xp professional. I try to go and changed the wep key on top of the PLA to the new assigned by the router and it only allows me to type 23 characters instead of 26. I used WEP encryption locks again one of my work laptop is still running windows 2000 - which I was able to connect successfully.

    How to set network for xp Setup to ask for the 124 wep key?

    Help please!

    Remove all wireless profiles present on the XP laptop...

    Click Start and go to control panel, double-click network connections,
    Right click on wireless network connection and click Properties.
    Now on this window, click on the second tab of wireless network and provide a checkbox "use windows to configure my wireless.
    and delete all the names of network from the preferred networks window. Then click OK...
    Right click on again wireless network connection and click View available wireless networks and try to re - connect to your network.
    Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
    It will connect...

  • Suddenly can't connect to the wireless network: limited connectivity or none, I tried to bugs, no help!

    I have a laptop with Windows Vista. Recently, I upgraded my home wireless internet connection, which meant the laptop could go online (previously I had just used online office). It worked very well without any problems, until I enabled him to download updates windows (don't know if it was a service pack or only some updated files). Now, I am no longer able to connect, I don't always get limited connectivity or none even if the wireless signal is "excellent". I tried 2 ' difficulty his "from microsoft, including TCP/IP, no effect. I tried to turn off my IPv6 setting, no effect.

    I am considering currently switch to XP Pro, even though I grew to like the 'look' of Vista, so it would be a shame. But I have to be able to get the laptop online!

    Any help gratefully received... I'm not very tech-savvy so I need the stupid version :)

    Thank you

    Hello

    Try to clean the Wireless Manager so there is not more entries and try connection toyaspin

    http://www.ezlan.NET/Vista/wireless_manager.jpg

    If you have to connect to the wireless router, make a thread connetion disable wireless security on and try to connect again.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • There is the Red Cross in the icon network and cannot connect to the internet, to detect any wireless network.

    * Original title: Internet connection problem

    It has red cross standing in the network icon and I can't connect to internet via USB modem or WiFi. It is also not detect any wireless network.

    Aalishan salvation,

    -Have there been recent changes made on the computer before the show?

    This problem can result from network card or driver settings.

    I will only refer to the suggestions provided by Gokul T on May 14, 2010 and check if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-is-unable-to-detect-any-wireless/9a7386ba-7775-4039-940b-20fa537c6084

    Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    For more information, see the links.

    Why can't I find a wireless network?

    Wireless and wired network problems

    Keep us informed on the status of the issue.

Maybe you are looking for

  • Re: Unable to download anything!

    Hello. I got my Satellite A500 for nearly half a year. However, whenever I try to download a new software, the computer turns off by itself! It's very frustrating, as you can imagine! Please any help would be greatly appreciated! Thank you!

  • How to convert a Contact card in text format on the Clipboard?

    OMG, how to copy the text into a Contact card in the Clipboard to plain text? This violates some divinity of Apple? Why is it so difficult? Help!

  • Satellite T130 - Wlan Realtek 8191SE weak signal

    I recently started using a Satellite T130 with Realtek 8191SE Wireless LAN. Wireless reception is terrible. At home, I can't wireless reception if I go to the floor, in a room just above the router. In hotels, I am unable to use their wireless unless

  • How can I find my password for port locker

    I'm trying to back up files on a USB device, and a window opens asking a password for windows port locker. I don't know the pass wod. Where can I find?

  • Invert the sense of the video shot with Canon Powershot SX20IS

    Hoping that someone might know how to help me.I was at the wedding of my half-sister over the weekend and did some video as well as photos.I'm changing the orientation of the videos that I shot. I shot the daughter of father vertically to get her dre