Entrance of the Audiobox USB not recognized by hearing (Mac version)

Similar Questions

• both bluetooth and usb not recognized, couldn't able to start and shut down properly. The message of the usb not recognized

  popping up the message usb not recognized. It occurs when the network was slow and tried to disconnect internet directly unplug and plug the usb between mobile phone and pc. then it does not go away even system restore has been made. In addition, the bluetooth does not work. When I stopped PC properly but it will restart. at the same time when I start it up, but it does not occur. I closed again and then start again and works. However, it appears the message usb not recognized frequently.

  To start with, try running the Fixit USB, here http://support.microsoft.com/gp/hardware_device_problems

• "Usb not recognized" keeps blinking and endangered

  Hello, the notebook of a colleague, she has the message "USB not recognized" that appears for a few seconds, then disappear. Sometimes it will come back repeatedly, sometimes he disappears for long periods of time. When I was reviewing its system, is come/gone several times, disappeared for a few minutes, then flashed again once again.

  She uses a laptop HP ProBook 4310 S. It uses two USB ports. One for its wireless mouse and the other to a Kensington Displaylink (allows for laptop > Displaylink > external monitor via the USB port), who worked without interruption throughout my check.

  Any thoughts?

  Hi phill.

  I suggest an update of the s chipset driver:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3974410&prodTypeId=321957&prodSeriesId=3974409&swLang=13&TaskID=135&swEnvOID=1093

  You should check to make sure that it is your laptop model.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setting up c4795 all in one printer - usb not recognized?

  When I try to put my c4795 hp software tells me to connect the printer to the laptop via the usb port (to connect the network settings to the printer).

  When I try this, I get the message usb not recognized on my laptop and am not able to continue the installation?

  Thank you.

  Yes, it must be connected

  Start > Device Manager > and get these unknown devices or devices that has this!

• I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

  My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

  I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

  Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).

• USB not recognized on the computer. Error code 43.

  Printer was working fine and then - after Microsoft updates have been installed - USB not recognized-Code 43

  Have you tried the new usb - port, nothing works

  Thank you

  We uninstalled the printer and then tried again the USB and it worked

• Toshiba DVR20KB peripheral shows USB not recognized

  Hello

  We have a DVR20KB, indicating, when turning on device not recognized USB error message on the screen, and there is no USB hooked up to the machine. We have replace the DVD player and of the Commission of the fault of not recognizing discs but the problem of the USB error on the screen he is yet to come, we have tried to unplug the USB card to the front, but the message still appears on the screen.

  Any help would be appreciated...

  Thank you...

  Originally posted by Ranil.Wickramarachch
  

  Hello

  We have a DVR20KB, indicating, when turning on device not recognized USB error message on the screen, and there is no USB hooked up to the machine. We have replace the DVD player and of the Commission of the fault of not recognizing discs but the problem of the USB error on the screen he is yet to come, we have tried to unplug the USB card to the front, but the message still appears on the screen.

  Any help would be appreciated...

  Thank you...

  Same problem here, I was wondering if it was caused by a recent ADO?

  Concerning
  Ken

• LaserJet Pro P1102w installation problems - USB not recognized during installation

  Struggling to configure the P1102w - using the installation DVD that accompanies it, I go through the steps. When I get to ' turn on the printer, connect the USB cable to the computer ' the printer is not recognized. Is not dismiss it, he just can't get it - it is with Windows 8.1.

  Tried it on another laptop running Windows 7 - same problem. The installer sat on the market "in waiting to connect to the printer via the USB port.  When you connect, Windows recognizes a USB device and tried to install the device - came with an error that could not be recognized and need to contact the manufacturer for the installation files.

  Update Windows, computer rebooted several times, deleted the HP installation files and tried with drivers downloaded from HP website - same problem.

  Any ideas?

  I had the same problem when working on a clients computer.

  (1) it has been infected by viruses, so we had to make a Virus removal on his computer.

  So you want to make sure that your computer is virus-free

  (2) in most Windows 8 HP computers in particular, drivers automatically installs on the computer.

  Check your device manager and click on printers. It will show what is connected.

  On my computer it shows printers >

  HP P1102W

  I had to uninstall it, to install the software. Once I did that the computer was able to recognize the USB cable.

• HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

  I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

  When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

  When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

  would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

  Hmmm.
  Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.
  
  Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
  If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.
  
  There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.
  
  Looking through your bios options, I recommend the following.
  
  On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
  Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.
  
  Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.
  
  Hope that helped. Good luck in what you decide to do with the machine

• USB not recognized on Windows 7

  Hello
  I have a problem. I instaled Windows 7 USB and mouse does not (USB not recognized-pop up on my desk).
  PLS, can you help me to solve this problem?

  Hello

  What model of laptop do you have?
  On the European driver Toshiba Satellite A350 series page I could find the registry patches. I think you should install it!

  In addition you should check the support page of USB devices maybe your Win 7 peripheral USB needs drivers

• USB not recognized of 9237

  I have a new USB-9237 with 9162 carrier, when I plugged the device was not recognized.  NEITHER DAQmx 9.2.1 worm was installed before I plugged it, all I get is green light only flashes on the 9162.  I went the 9237 with a 9239 and this device is recognized.

  Measurement and automation explore worm 4.7.1

  any thoughts or suggestions would be appreciated

  Jesse

  Hello, JENO,.

  The version of the NI 9237 with d - SUB connector is not supported in the chassis USB-9162.  It is because the device uses a different product ID and would need a different firmware, which is not currently supported.  In order to use a NI 9237 module into a USB-9162, you need to use version RJ50, not d - SUB version.

  Kind regards

• HP LaserJet P1102: USB not recognized during installation of HP LaserJet P1102

  I have a Sony Vaio VPCEH computer laptop with Windows 7 and when I run the disk I got with the printer on my laptop, that the installation procedure works in what concerns the section "Install printer Software". When you are prompted to turn on the printer and connect the cable USB to the laptop it says 'USB not recognized '.  I tried all 4 slots USB into my laptop but the USB still appears as an unknown device with an exclamation point in a yellow triangle. I searched internet solutions and tried to uninstall the unknown device in Device Manager and restart the installation with the disc, I also tried clicking on the unknown device driver software update but it says the software driver is up to date and still, it shows as an unknown device and is not recognized. I also tried to uninstall the HP software from the disc on my laptop and that reinstall but nothing has worked. I felt for over 2 weeks now and have not been able to use it because of this problem and I really need for University, so I would be very happy if someone could please give me a solution to this problem

  Hi @Janemaguire,

  Have you tried another USB cable?

  Because the printer is not detected on the Mac, it may be the USB port of the printer.

  What happened when you tried to install the printer on Mac?

  Error messages?

  What is the model Laserjet P1102w?

  Let me know. Thank you.

• Device USB not recognized (malfunction)

  I went on my external hard drive and an error message came - USB not recognized - device due to a malfunction. I tried switching off all voltage and turn support but still the same voltage. Then I went to print something and the same message came. However, I used my printer today without any problem. I don't know what happened. Advice please? Thank you very much. Aide-de-camp

  Hello ~ thanks for the reply.

  Just to say that I read somewhere switch all switch off and leave it for half an hour - then turn on everthing. Miraculously - it worked!

• FAT corrupted USB not recognized

  I have problems with my rocket GB 8. This morning, while trying to fix my flash drive I accidently deleted the partition off my rocket. Of course, now I'm reeciving 'Fat corrupted' error on my fuse and USB will not recognize. I've searched high and low. I tried to power it in 20 seconds, put the "rocket" on hold, then press on the< rewind="" button="" (and="" center="" buton)="" while="" connecting="" the="" usb="" and="" i="" still="" receive="" the="" usb="" not="" recognized="" in="" windows="" (xp,="" vista="" &="" 7).="" i="" even="" tried="" using="" my="" wife's="" laptop="" with="" vista="" with="" the="" same="" usb="">

  Please tell me I didn't have the toast when I messed up the partition! Help!

  Finally, after the persistence, I got the computer to recognize the "rocket". Managed to format to FAT32 via Windows without any problem, then via the "rocket". All is well now.