Error "bb::system:SystemDialog:SystemDialog(const_bb::system::SystemDialog&)" is private.

Similar Questions

• Read error - SOLUTION system configuration data

  Today, I found a solution to the error of notorious boot not only on the toshiba, but some other brands also.

  The error is: System configuration data read error.
  He invites to start with 2 beeps which prevents the computer laptop Moldavian from.

  I tried everything I could to remve this message but noything helped me.
  Replace all, cmos battery, updated the bios, loader, drives, keyboard and etc.

  Today, I found a solution very simple that I want to share with you guys.
  This solution worked for me and I hope it will work for you too.

  Are you ready? :)

  Go to the Bios and change the Bios language french.

  Post here if it works for you also.

  Thanks for sharing your experience with us. But its really hard to believe that your solution would be linked to all devices such problem

  However, good to know that this small change in the BIOS has helped you to resolve the issue

• Equium A210 - error - operating system not found

  Hi guys

  I'm new on this Yes, you can be sweet. I have an Equium A210, 2 years old.
  Everything was fine until today when it goes off.

  I thought that it might overheat because he felt hot so cool.
  When I turned it back I get the error "Operating system"... not found This is accompanied by a constant clicking noise coming from under the laptop!

  Any ideas anyone?

  Thank you very much

  This error is known to me.
  I had too!

  It appeared after the death of my HARD drive.

  I think the BIOS does not recognize the HARD drive and therefore the operating system is not found.

  To me, it seems that you need to replace the HARD drive and then you could install the OS on the Toshiba recovery disc.

  Good bye

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• password check fail error fatal system stopped. cnu8474wv1 please help very appreciated :)

  As soon as I turn on my hp computer mini that it says enter current password.

  After that I returned it 3 times it is said.

  password check ISP.

  error fatal system shut down.

  cnu8474wv1

  Any help is very appreciated

  Dear customer,

  Welcome and thanks for posting your query on the Forum from the HP Support

  Looks like you are looking for a password here, we will surely help you with this problem

  Please try this password = e9luvxvd63

  Steps to follow:

  1. use the posted above unlock code to access the BIOS

  2 disable all passwords that are enabled

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

  6. then exit the BIOS saving & exit option to save the changes.

  Troubleshooting:

  Incase if the password does not work please try a Hard Reset as follows.

  1. power off the laptop

  2 disconnect the power adapter and remove the battery

  3. press the Power button for 30 seconds

  4. connect the power supply/AC adapter (leave the battery for now) & start Notepad

  5. If now see you a password, please enter the same password I've shared before and press on enter

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star KUDOS left to say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• XP - error: the system cannot find the specified file.

  I was installing Windows XP Service Pack 3 today and it worked very well until he came to update registry after the installation process, after what is happening the installation closes and then displays an error "the system cannot find the file specified." I tried to close all programs, and then restart and shut down everything that runs when the computer starts and which also failed.

  Hello
   
  
  1. have you downloaded the stand-alone package for the service Pack 3 or are you using Windows update?
  2. are you able to boot to the desktop now?
  
  Method 1.
  Run Disk Cleanup and disable the security software and t hen try the same installation and check.
  Want to t he article below for disk cleanup:
  http://support.Microsoft.com/kb/310312
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update, Error 8007000 b - "fsutil resource setautoreset true C:\ ' returns the message "error: the system cannot find the file specified. '. »

  Tried to do a Windows Update and received the error message
  Windows Update 8007000 b error

  I tried the solution proposed in the windows of the promp command of the Administrators account

  true fsutil resource setautoreset C:\
  
  and received the error message.

  Error: The system cannot find the specified file.

  Vista is installed on the C: drive

  What now?

  Problem disappeared.

  I downloaded two no microsoft updates and restarted my computer. Then, I downloaded the updates from microsoft that now installed successfully.

• Compaq mini 700: Compaq mini 700 laptop error fatal system shut down.

  Compaq mini 700 laptop error fatal system shut down.

  CNU9144WRX

  can you pls give me a current password. my mini doesen´t have a.

  THX

  Hello

  Enter: e9lo3vvdb4 (to be noted that in both cases, the 3rd character is a lowercase L)

  or

  e9lo3vvdbr

  Kind regards

  DP - K

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Whenever I boot Windows XP Professional I get the message: error 7026 system event log

  Original title: 7026 event log system error

  Get an error in the error 7026 system event log the following boot-stat or system-stat driver could not load DCDisk.  I get this log entry each I boot XP Pro.  It doesn't seem to be the cause of failure, other than the log entry.  The only app that has a dcdisk.exe I can find is Farstone I installed on the system

  Uninstall and reinstall the program that you have installed that has created the entry

  http://consolecopyworld.com/DC/dc_utils.shtml

  Alternatively, you can remove the redundant entry using Autoruns.

  To identify what loads when you start using Autoruns (freeware from Microsoft).

  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  I installed ENLWI-G2 802.11 g Wireless PCI Adapter in my Dell Optiplex 760 with XP SP3 32-bit Windows. But it gives me a blue screen with the error:

  Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  How to solve this error?

  Try to switch on the memory modules. Ask the MS site for more information on the specific error.

• error 53 system produces "net view \\computername.

  error 53 system produces "net view \\computername.

  Tupac Shakur,

  I think I see in this case. You try to access your computer from your desktop using thenet view command?

  If so, you have about it the wrong way. Net view isonly for access to systems on the same network. NET view would help to me if you try to access another computer on the network in your office, while you were still at work. Itwill not work across the internet to access your computer at home.

  What I think you're looking for is a remote access solution. There are 2 ways to go about this: sync a folder of files between systems or newspaper in your system and remote control. The response to these two solutions becomes Windows Live Mesh.

  Take a look at the following links and see if they make you what you are looking for:

  • Windows Live Mesh: To connect to a remote computer
  • Windows Live Mesh: Synchronize folders between computers

  If so, download Windows Live Mesh from here:

  Windows Live Mesh 2011

  I hope that's what you're looking for!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• Error "the system cannot find the specified file. (0 x 8007002)"when you try to bacup on external hard drive.

  original title: the backup help.  I can't run a backup.  Windows Vista 64-bit.  Get the error "the system cannot find the specified file. (0 x 8007002) ideas?

  My last successful backup has been 12/12/2010!    I am backup on an external hard drive.  I installed the KB947821 hotfix successfully, but the backup still does not work.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/0e0af440-1da6-4fe4-8B44-872078ec4911

  I'll go through this link try others did for the resolution measures