Error code 39 on DVD player?

Similar Questions

• receiving error code 39 for dvd, driver will not load.

  replace corrupt cdrom.sys

  small management business of vista 32 bit.  receive error code 39 for dvd.  driver will not load.  I tried to uninstall.  same question on re - start.

  I tried regedit suggestions.  UpperFilter deleted, no lower filter exists.

  In addition to the above on the excellent advice, cdrom.sys is not corrupt.

• I get an 0XC0AA0301 error code when burning DVDs...

  I get an 0XC0AA0301 error code when burning DVDs...

  Hi mohamed,.

  Thank you for visiting the community Microsoft Windows 7.  This message provides troubleshooting steps about the error you received when you try to burn DVDs.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• Satellite C850 - 13 error Code 19 - drive DVD RAM - X

  The DVD player does not work.
  Device Manager says there is an error Code 19

  I uninstalled the drive
  I scanned for hardware changes
  Who is the reader, but would not install the driver
  He said to contact my manufacturer

  How can I fix the error Code 19?

  We don't often use the DVD player, but want to make a recovery disk
  We have not updated the driver or installed a new device

  I followed the instructions on this page
  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
  Found and removed the * value, for UpperFilters and Device Manager reports an error.

  But I can still use the disc to write to a disc, I get this error reported:
  "Power calibration area error has occurred, please check if the media is scratched or dirty.
  It is not.

  The drive is dead?

  Post edited by: Don with additional info

  Hello

  What system do you use?

  Also have you tried to write data on discs of different brands?
  It might be possible that there is a problem with the disc incompatibility.
  So if you haven't tried different brands in the past, I recommend to do this.
  TDK are good and recommended use and test the R discs.

  Some users to also clean the laser lens. This helped also.
  Hydrophilic cotton tip and liquid alcohol is a good tool to get the clean laser lens.

• Region code of the DVD player

  The DVD on my Pavilion A1375A Media Center PC drive is set to region 1 - I am in Australia (region 4).

  I can't set it to region 4.

  I asked HP to sell me a new DVD player, but they do not know what the new discs region code will be and asked that I contact Microsoft and ask:

  (a) area code would change once a factory of re - configure?

  (b) what would be the new replacement drive region code?

  It seems strange to me that HP can't?

  Hoping someone can help,

  all good wishes,

  David

  Hello

  You must talk to people bad at HP since it is not Windows that
  decides what optical drives of regions are defined.  HP provides probably hundreds
  readers of your region (really the thousands).

  It is by design.

  DVD region information
  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  DVD region code
  http://en.Wikipedia.org/wiki/DVD_region_code

  You can buy devices that claim to be region free and software that claims to
  in order to allow other regions to read even if I have no experience
  with those.

  Region Free DVD Player Information
  http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

  Region Free & Code free DVD player information
  http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

  Forums - a lot of expert real help
  http://Club.myce.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Code 19: Unrecognized DVD player

  My DVD player suddenly stopped working on my laptop, literally from one day to the next. I tried running the kb314060 of Mr. Fixit, but when he tried to reinstall the driver, it failed.

  I don't know exactly what to do now...

  Hello
  
  19 code: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. To resolve this problem, you can first try running a Troubleshooting Wizard. If this does not work, you must uninstall and reinstall the hardware device.
   
  Try the following steps as an administrator and verify the result.
  Step 1: Download and run Microsoft fix it.
  1. visit the website, download and run Microsoft fix it following: http://support.microsoft.com/gp/cd_dvd_drive_problems
  2. once the tool is running, restart the computer and check the functionality of the device.
   
  Step 2: Roll back the driver.
  1. click on start, type devmgmt.msc and press to enter.
  2. expand CD/DVD-ROM drives.
  3. double-click on the sub element.
  4. click on the driver tab.
  5. click on Roll back driver.
  6. click on ok.
  7 restart the computer and check the functionality of the CD/DVD ROM.
   
  Step 3: Restore the computer to an earlier time when it was working fine.
  1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2 choose the right date when the device worked very well and follow the instructions in the wizard to complete the task.
  3. check if the CD/DVD ROM works very well.
   
  For more information about system restore, visit this link: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore
   
  I hope this helps.
  
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Error Code 39 CD/DVD

  My CD/DVD drives stopped working and I got the Error Message "Code 39".  I'm afraid of myself to uninstall the player.  I do not have the CD of resources provided with the computer, but this seems to be of any help.  Any ideas?

  
  

• Error code 19 - CD/DVD-ROM problem. Please help and read the description first!

  I tried to load my games such as rollercoaster tycoon on my computer by inserting them into the disc drive. Nothing happens. I went to toautoplay and it had all the right settings I wanted. I changed several times and tried to re - insert the disc, but nothing has happened yet. I thought it was a problem of CD/DVD drive, so I went to 'Computer', right-click on Vista64 (C :) and selected 'properties'.) I clicked on the Hardware tab, and then on HL - DT - ST DVDRAM GS20N, my CD-ROM/DVD-ROM drive. I realized quickly that there was a problem, because the box said"device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.» (Code 19) «. I looked at the code 19 on the support Web page and found a link to a Microsoft Fixit, Windows Powershell 1.0. I installed the program, he ran through and he said that he had fixed the problem. I inserted the game once more, but still nothing happens. I went to my CD-ROM/DVD-ROM drive once more and he said that the problem was not resolved. I don't know how to solve this problem. Help, please! (It is not just the CD I try to insert, because none of the many CD I tried to use will work). Should I try to restart my computer?

  Hi meluvcheese22,

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.

  To resolve this problem, you can follow the methods below:

  Method 1:

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article:How to back up and restore the registry in Windows:http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

  You can check the link below: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116

  Method 2:

  a. Click Start, type devmgmt.msc and press to enter. The Device Manager window opens

  b. expand DVD/CD player and right click on the sub element and click on uninstall.

  c. restart your computer.

  d. open Device Manager, click Action,

  e. click on scan for hardware changes. Follow the instructions.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• error code c00d11c7 windows Media Player 11

  I get this error when I try to rip, burn or syn saying that the required Audio Codecs
  is not installed on my computer. Yet when I check my box of Audio Codecs it is checked?
  Can anyone help please.
  Im running vista Home premium 32 bit, sp 2, IE8 Acer laptop 4 GB mem, 500 GB hard drive

  Hi gerryx,

  Thank you for visiting the Microsoft Vista Forum.

  Please follow it mentioned below as follows:

  1. open Windows Media Player (WMP)

  2. click on Tools

  3. go to Options

  3. Select the menu Music Rip

  4. check if "copy protect music against" checked? If you uncheck the box and re - extract the tracks, it should work fine...

  Also would like to suggest uninstall all older versions of codecs and re - install K-Lite code.

  Hope this information solves your query.

  Let me know if it worked.

  Thank you, and in what concerns:
  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Error code 10 - Optiarc DVD RW AD7561A ATA - that legacy can't star

  The CD ROM has dissappeared off my computer. When I enter the currency manager and click for a solution online I don't seem to get an answer. When I try to update the driver, I get a message that the best possible driver is already installed. But still, I can't operate this unit.

  I'm running a Windows Vista HP DV6500 notebook

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Re: Equium A200 - Code 39 on DVD player

  My DVD drive came recently with code 39 and shows that of gone through device driver... I looked a few post on the Publisher of the registry... but how do I know which one is right for my model?

  Hello

  The solution given by Microsoft is not specific model and if you use Vista operating system please check this document http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  Just follow the instruction given by Microsoft.

• Error Code 39 - CD/DVD does not work

  A month ago I installed a new graphics (NVIDIA GeFORCE 6200 OC) card in my Dell Dimension 2350.  I discovered that the 250W power was not enough power to run the new graphics card, so I ordered a new power supply 480W.  After you install the new power supply, or my CD or my DVD players don't work.  They have a yellow! mark in Device Manager.  In the State of the device, he says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "I tried to remove the Upperfilter and the UpperFilter registry entries.  It still does not.  I put the old power supply in.  It still does not.

  Help!

  
  

• Error: Cannot find a DVD player when you try to burn a movie

  original title: I did a movie on windows movie maker and I am trying to burn onto a dvd but my computer says it can't find a dvd burner.

  I made a movie on windows movie maker and I am trying to burn onto a dvd but my computer says it can't find a dvd burner.  I know that my computer came with one as I burned the files on DVD before to what I can do to correct the situation?

  Yes I am using windows dvd creation and it is saved in the .wmv format.

  =====================================
  It is possible that you have a hardware problem with your
  DVD burner... may need maintenance or replacement.

  And... the following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Envy laptop: Error Code #2148 Adobe Flash Player

  Upper left corner, getting a box that says: year Action Script error occurred

  Security 2148ecurityError # Error: Error #2148: SWF file http://p.jwpcdn.com/6/12/jwplayer.flash.swf cannot access the resource local res://ieframe.dll/navcancl.htm?busted=19614. Only SWF files local local - with system files and trust can access local resources.
  at flash.display::Loader/_load()
  at flash.display::Loader/load()
  at com.longtailvideo.jwplayer.view::View/loadImage()
  at com.longtailvideo.jwplayer.view::View/_imageTimerHandler()
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.utils::Timer/tick()

  Thank you