Error of HQ after hyperic Server installed

Similar Questions

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• Error 800b0100 code after trying to install KB2416470

  I tried to install this update of security for some time now. I tried to install the analysis TOOL and I still have this problem. Also, I rebooted the computer and tried to cut the firewall so to download. Always down. Whats up with that?

  I guess I'll mention that I have a Windows Vista HP laptop X 86 - based PC still ruin on the Service Pack 2 due to this update has failed.

  LaurainFlorida,

  First, configure the computer to start in minimum mode - How to solve a problem by performing a boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state all the 3rd party firewall will be disabled. Make sure that the native Vista firewall is now activated by clicking on the start ORB, in the Start Search field type in the fire. Under, click on Windows Firewall to ensure that the programs that he is now.

  When you have restarted, it as a clean boot, click the round of departure.
  In the field type to find in the programs.
  Under programs, click programs and features
  Click once on the Microsoft .NET Framework 3.5 SP1.
  In the Menu bar, just above the list of programs, click Uninstall/Change. Accept the UAC prompt.

  Wait for the window to load and then make a mark next to repair, then click the next button.
  If the repair operation is successful, Cancel the boot minimal steps nowand restart the computer.

  Download and Save KB2416470.
  Security Update for Microsoft .NET Framework 3.5 Service Pack 1, Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2
  Because it is the correct update for your computer, click the button download next Windows6. 0-KB2416470-x 86.msu .

  When the download is complete, close all open programs, applications and browsers.
  Now install Windows6. 0-KB2416470-x 86.msu
  Restart the system, if you are prompted to.

  If the failure of the repair operation, you must uninstall Microsoft .NET Framework 3.5 SP1, reboot, then download and Save .
  Microsoft .NET Framework 3.5 Service Pack 1

  Suggest that you leave the computer in clean boot configuration when you do the above.
  After that .NET Framework 3.5 SP1 installs, Cancel the Clean boot as follows.

  After you restart the system, updates for the .NET Framework 3.5 SP1 should be revived to him through Windows updates.
  If all goes well, they will install now.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• No boot device not found error on R610 after the OS installed

  Hello

  Then I configured the Raid 1, installed Windows server 2012 R2 from USB. But when the system reboots after the installation it says it us no available boot device. I tried to start it manually by the raid controller but still said the same thing. The boot is BIOS.

  I'd appreciate jf you could help me look on this site and running.

  Thank you

  Feri

  Hi Robert

  Thanks for your message, I solved the problem

  The boot sequence was set correctly and I also tried to boot from the RAID directly, the problem was the firmware. I've updated all the firmware and that fixes the problem.

  Thanks for your help

  Faya

• ERROR CODE 643 AFTER TRYING TO INSTALL VISTA UPDATE.

  I need to install several times, getting error code 643

  http://support.Microsoft.com/kb/923100/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  If the above does not solve your problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: "Win32 dll' after that I installed the latest driver from nvidia.

  My specs:

  -Windows Vista Edition Home Premium 64-bit

  -4 GB of ram

  -Core 2 Duo E8400

  -Geforce 260GTX

  I installed and activated my Windows Vista with service pack 2. I downloaded and installed all the latest drivers of my motherboard website.

  Problem: I downloaded the latest driver for my graphics card nvidia and once that I reboot my windows displays the error message saying "win32 dll" does not work and my background task bar is full of this message. Also, my pc is very slow. I somehow get to "system restore point" restore back to another restore point.

  Once my pc over to restore to a different point, my pc works fine. So I installed an old version of my graphics driver and it worked fine. Restart and distillers works very well.

  Question; What is the problem with my pc? What is my graphic card, driver, something that I didn't do, and how can I solve the problem?

  Thank you for your help

  Hi tsunomi.

  Have you had a chance to do a startup repair?

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• error code 0x80073cf9 after trying to install an app

  I had to reinstall windows 8 as I had a problem, the installation is successful, and I reinstalled my other programs. Then I tried to put my apps on it but was informed not installed app erro code 0x0073cf9. I am a novice so please explain with simple words

  Hi Angus,

  Thank you for your message and give us the opportunity to help you.

  This error code is usually related to a file which is missing and prevents the installation of the applications.

  You can follow these steps to check if they solve the problem.

  Method 1: Re-create the folder AUInstallAgent
  a. Press ' Windows and R "keys together to bring up the command window run.
  b. Type "%windir%" without the quotes and press ENTER. You should now be in the Windows folder
  c. look for a folder named "AUInstallAgent". If it is missing in the "Windows" folder, then right click on an empty space and click on "new folder."
  d. rename the folder in "AUInstallAgent".
  e. restart the computer and verify if you are able to install apps.

  If the AUInstallAgent folder is already available in the above mentioned location, then continue with the following steps

  Method 2: Zero store cache reset
  (a) make a right click the start screen (lower left corner)
  (b) click on 'run '.
  Type c): "WSReset.exe" and press enter

  Method 3: Check if you are able to install applications to the clean boot.
  Follow the steps here to get into the boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the diagnosis is made please follow "step 3: reset the computer to.
  Start as usual"on the article to start the computer in normal mode.

  For reference
  http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store

  Please get back to us if you have any problems or need any other assistance.

• After trying to install updates error 80070643 # appears

  Continue to receive the error code 80070643 # after attempting to install updates. Update for microsoft Net Framework 4. Have tried several times to update with

  without success.

  Windows Update error 80070643 http://windowshelp.microsoft.com/Windows/en-US/Help/e5304fc1-9264-4d97-9c35-3c3ad167e1701033.mspx>

  UTC/GMT is 16:48 Thursday, September 1, 2011

• Continually, I get the error that cannot reach the server while trying to install SP1.

  Win XP Pro reloading, get all updates

  I reinstalled Windows XP Pro and need to update to SP1 to 3 as well as all security updates.  (After download) installation, SP1, I continually get the error that cannot reach the server, visit Web of MS for a version that requires no web access if the problem persists. I can't find this version of SP1 that does not need to happen on the server from Ms.  In addition, isn't there an easier way to get all updates when you perform a new installation instead of going one by one with all the updates?

  If you have SP1A, then you can go straight to the installation of SP3.  If you have SP1, then you need to install SP1A or SP2 before going to SP3.  You can get the updates described in the following article:

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389/ >

  HTH,
  JW

• After 2.2 update, error: "the Apple software update server is not found."

  Apple Software Update just updated itself to the version 2.2.  After letting the Apple Software Update 2.2 finish, I receive the error: "the Apple software update server is not found.  Check your Internet settings and try again. "The tool also pointed out"the new software is available from Apple.  I run in a typical home environment to network with a router on FIOS on Windows 10.  A virus scan was clean.

  I just uninstalled iTunes and apps and fact a relocation fee.  Once again the proposed Apple Software Update app updated to version 2.2.  After the update successfully, the error appears again: 'the Apple software update server is not found.  Check your Internet settings and try again. »

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• I have a 2008 standard server, installing kb2585542 last updated security. error code is 80070005. my server is 32-bit xenon.

  original title: kb2585542

  I have a 2008 standard server, installing kb2585542 last updated security. error code is 80070005. my server is 32-bit xenon.

  THX

  kg

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• Error code: 0x8007F004 when you try install kb2286198 and kb2229593 on Server 2003 R2

  He suggested another forum MS that I post this here. I am updating a Win2003 R2 Server with kb2286198 and kb2229593. Initially, I found little or no info, but read things on WXP shows that it could block the antivirus software. AV has been disabled, I'm an admin on the server is my colleague who gets the same permissions error when you try to manually install these updates as well.

  If anyone has any help it would be great.

  It has been suggested from another MS forum I post this here... AV has been disabled, I'm an admin on the server is my colleague who gets the same permissions error when you try to manually install these updates as well.

  Posted in your original thread: I have a 2 k 3 R2 server running software to clock and network shared directories for my business. Server is blocked on a KB2229593 update and I can't find a way to allow installation. When I try the normal windows update, it can quite simply, when I try to install it manually it gives me an error, you are not allowed to install in contact with server 2003 from your system administrator.

  8007f004 - STATUS_INSUFFICIENT_PRIVS [PRIVILEGES]

  In fact, the error suggests that the behavior can be due to infection. That being said...

  You have restarted the server since the initial failure to install KB2229593 (which was released July 13) or the inability to install KB2286198 today?

  ~~~~~~~~~~~~~~~~~~~~~~~

  Don't not giving you skin but I think you'd be much better off the coast of post in this forum since we really don't deal with Windows Server in the Windows Update forum:http://social.technet.microsoft.com/Forums/en/winserversecurity/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

  I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

  I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

  I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

  Product Installation status
  Product: SQL Server Database Services 2005 (MSSMLBIZ)
  (Previous) product version: 3077
  Version of the product (Final):
  Status: failed
  Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
  SQL Express features:
  Error number: 29503
  Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

  I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

  I don't know what to do next.

  Can someone help me?

  Thank you.

  Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Under XP, after downloading and installing a new program, receiving the error message "unable to load DLL C:\WINDOWS\USER32 library. DLL in the specified module could not be found.

  I received the above error message title after the download and installation of a new program. Anyone know how I can find this add-on or fix this problem?

  Hello

  · Do you have what program installed?

  · You receive an error with the error code?

  · What is the number and the model of the computer?

  · What service pack is installed?

  You can check out the link below and try the steps listed: how to fix common errors of the User32.dll file: http://support.microsoft.com/kb/142676