errors on a non-awdl machine awdl0

I have a 2011 end, 2.5 GHz Core i7 MBP El Capitan 10.11.2 running. It runs great except for Airplay streaming to my Apple TV, especially when you try to use the TV as a separate display. System hiccups, stutters, and generally abandons the connection altogether. It's the best on the network of 5 GHz to 2.4 GHz, but not much. When you run the Apple TV Airplay, my console is always flooded with the following message (no need to redacted information):

"" AirPlayXPCHelper [102]: [WiFiManagerCore] # link to help ' awdl0 ' failed :-3900 / 0xFFFFF0C4 kA11ParamErr

I did some good research on that, and I understand that my MBP is not the material needed to execute awdl and I confirmed through "ifconfig" that there is no trace of an awdl on my system interface. I guess (perhaps wrongly) that the error "link to the rescue" pasted above is at the origin of the problem of performance of air time, but even that aside, I occasionally meet with another network funky and I noticed that when I do often console has error messages that reflects the lack of an awdl0 interface.

Obviously, using the command "sudo ifconfig awdl0 [up/down]" does not work because there is no interface to disable. Is there another way to fake - disable the interface completely or sort the system there's no need to redirect the scripts and programs that must run in El Capitan of alert? Other suggestions? I know there are many people with Mbps by 2012 which must also have this problem. I tried to find a solution online, but all research with "awdl" as a term is flooded with 'sudo ifconfig up/down awdl' tips for Yosemite wi - fi problems, but few things. Any help would be appreciated.

1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

There are ways to back up a computer that is not fully functional. Ask if you need advice.

3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

4. here is a general summary of what you need to do, if you decide to go forward:

☞ Copy a particular line of text to the Clipboard.

☞ Paste into the window to another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Stick the results, which will be copied automatically, in a response on this page.

These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

8. start the Terminal application integrated in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

    Test started

        Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

    The test results are on the Clipboard.

    Please close this window.

The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

11. when the test is completed, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

13. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

14. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

Tags: Mac OS & System Software

Similar Questions

Gettings error message: error in the non paged area error page

I have a Satellite M45-S265 with Windows XP. Even if I moved abroad and then went home, I haven't lost my recovery CD!

However, my computer went to compensation under a policy of service from Best Buy. She returned with a new card, new keyboard, new drive hard (in white), new CD player and I don't know what to another new. I guess the 3rd global environment was pretty hard on this (dust, moisture, heat) so it takes a lot of new things.

Now, when I use the recovery CD, it seems to do everything OK, until he asks me my settings. After settings, it tells me it will reboot and it does, and when she returns to the top he gets a blue screen with the error 'page in the non paged area failure. "

Technical information of the blue screen:

Stop: 0 x 00000050 (0xA9A35A00, 0 x 00000000, 0 x 00000000, 0x805C52BA)

win29a51.sys address A9A35A00, at A9A35A00, date stamp 00000000

When I restart, the windows looks like it will start up. Can I get a pretty little box of windows with the message "the system is not fully installed. Please run Setup again. »

I wonder if the restore CD will not work because there is perhaps now another brand of hard drive on CD here, or different, different determinants?

Best Buy has something wrong or I have to take the computer to them?

Original internet research indicates the problem could be faulty RAM?

What should I do?

Thank you
Susan

Hi Susan,.

Looks clearly like a related problem of RAM. I recommend to put the machine to a technician and allow it to check the RAM memory, because this fault of page errors occur when something was written into RAM and then if the operating system asks files block in the module memory may not be accessible which causes the above error.

Greetings

Disk error backup external hard Time machine

Hello
While that hurry to catch a flight, I accidentally disconnected my external hard drive (which I use for time machine backups) before ejecting. Now the House, the time machine backup does not recognize my external hard drive. I went into disk utility to try to repair the disk. Here's what he said:

Verification and repair card partition for "Time Machine external HDD ' Verification of prerequisitesChecking map of partition partition listAdjusting to adapt to any disk as a requiredChecking for a partitionChecking of the system EFI sizeChecking of the system partition EFI systemChecking of file system EFI the EFI folder of the system partition contentChecking partition data HFS charger spacesChecking boot partitionsReviewing support loadersChecking Core Volume physical storage partitionsUpdating Windows boot.ini boot files of score as card requiredThe partition seems to be OK

Verify and repair volume 'Time Machine' Repair file system. File system check exit code is updated 8. support partition for the volume as requires it. Error: disk utility can't repair the disk. Back to the top as many files as possible, reformat the drive and restore your backed up files.

I could really use some help as to how I should proceed. Any advice?

I think you need to clear this backup disk, and while you are this and do a full backup (which takes all afternoon to all night) you will be working without a net. If you do in idle time, and after checking your boot disk, the risk of catastrophic failure while the backup is low. Start now and in the future, you will have a backup.

If you have a different backup disk, add it and Time Machine will create a new independent backup on it, and then Time Machine alternate disks automatically.

ThinkPad Tablet 2 - error 2201: UUID of the Machine is not valid

I just unboxed my "nine" Thinkpad Tablet 2 and got an Error Message 2201: UUID of the Machine is not valid.

Network card, sound card, USB camera don't work at all. They said that I have not installed drivers for these devices. Because I can not connect to the Tablet, I'm unable to install a driver for them.

Can someone guide me to solve this problem?

TKS you all!

Yes, you will need to send the machine back for the service.

Error initializing pci express slot machine

Hello

Can you make sure that you first power of the PXI chassis, then wait a few seconds, and then turn on the PC.

This error can occur if the PXI chassis is not fed first.

Unable to Boot the BIOS since then using MXI Express
http://digital.NI.com/public.nsf/allkb/05B7131814A5DDA38625710F006BB098?OpenDocument

If it doesn't, it would be useful to update the BIOS.

You can also try it on another PC to make sure that the problem is not related to the PC.

If none of the troubleshooting steps in the work, I suggest that you call us for more troubleshooting and/or send your material for repair:
NI.com/Ask
(phone for france: 01 57 66 24 24)

Best regards

WiFi, tries to connect but do not. No error. Work on other machines

Yes I saw this sticky.

1 5 PCs stopped connecting to the WiFi router. He had worked for a while. The SSID is listed as "automatic". Click on connect and it runs for minutes before stopping without error message. Nothing is displayed in the event viewer. Virus scan says own. I can run an Ethernet cable to it and it will work. It happened during a month. Because it is used occasionally by a 9 year old child I let go. Another computer is now too from Saturday. We ran on the second PC Ethernet cable and it will work. Recently the 9 year old had used this computer for school work. His computer (a 1st) worked very well until some time after starting his homework on it. Of course, it could be something else. It is now two machines not connect is not without error. Could be related to something he does inadvertently.

Any ideas on troubleshooting?

Once you connect to a wireless network, the connection details are often recorded as a 'profile' in your wireless network application and re-used the next time the wireless network is met. If this profile has been changed somehow, the default information collected may not be sufficient to authenticate on the subject at a later date.

Look in your system tray for your wireless internet application, double-click on it or otherwise run it on the screen. Find a 'Profiles' button and open the window profiles. Then, remove all the profiles you see here such that it is no longer a story for a connection attempt. At a minimum, remove the profile that is associated with the SSID that you are trying to connect to. After that, try to re-scan and reconnect to your network.

HTH,
JW

error message 7528/7528 Registry\Machine\Components

can someone help please, I got this error message, I have a problem with the starter, I had the 2bleeps not one alone.

I tried the reset button but it doesn't work every time. I just run a deep scan Microsoft Safety Scanner, and it came clear.

I have installed Norton and windows are uptodate.

Thank you for your help, did what you said, but was still the odd days, it has not started.

I did not use Disk Defragmenter, he ran for hours and don't let any report,

So I was none the wiser.

I also ran spybot O.K., he finds the cookies.

At the end of the day, we opened the file and found memory was not fixed course

Since April 15, I made a note each day which reads OK start

I hope this is the end of the problem, and it may be useful to someone else.

How to fix error of starting non-system disk?

I don't so much mind the error message. It's the loud beep that alerts you when this message appears. I tried to disable the sound by all means possible and it has not yet stopped. In addition, told me that changing the boot order would stop the error message, but when I went into the settings, boot order was very good. It really starts to annoy me. Need help as soon as POSSIBLE!

Hello Holden,

Thanks for posting your question on the forum of the Microsoft community.

I would like to know some information about the problem so that we can help you better.

1. What is the full error message when you say, "no system boot disk error?
2. What is the brand and model of your computer?
3. have you made any hardware or software changes to your computer recently?

Because the boot order can be changed, it is possible that the computer accesses a no operating system disc in the optical CD/DVD drive. Follow the steps below to remove all the non-system drives and restart the computer.

a. disconnect all USB or 1394 (Firewire) devices that are connected to the computer.

b. remove all drives CD and DVD readers.

c. press and hold the "Power" button for 15 seconds to turn off the computer.

d press and release the "Power" button to turn on the computer.

I hope this information helps.

Simply answer the required information and let us know if you need more help.

Thank you

Error when creating a virtual machine

Hello
When I try to create a new virtual machine via the host customer I get following error message:
Cause: TypeError: _deviceHelper is not defined
Version: 2015.12.21
Build: 3357452
ESXi: 6.0.0
The exception stack:
toVirtualMachineConfigSpec @ https://XXXX/UI/scripts/main.js:60:10100
createVM @ https://XXXX/UI/scripts/main.js:61:2446
createVM @ https://XXXX/UI/scripts/main.js:67:13834
$scope.wizardOptions.currentPage.onCommit @ https://XXXX/UI/scripts/main.js:52:16535
onCommit @ https://XXXX/UI/scripts/main.js:120:23151
onFinishClick @ https://XXXX/UI/scripts/main.js:120:24165
.controller < / $scope.onFinish @ https://XXXX/UI/scripts/main.js:120:26196
eb.prototype.functionCall/ < @ https://XXXX/UI/scripts/main.js:6:21837
@ https://XXXX/UI/scripts/main.js:89:31513
Me / this. $get < /k.prototype.$eval@ https://XXXX/UI/scripts/main.js:5:16488
Me / this. $get < /k.prototype.$apply@ https://XXXX/UI/scripts/main.js:5:16702
@ https://XXXX/UI/scripts/main.js:89:31493
n.Event.Dispatch @ https://XXXX/UI/scripts/main.js:2:14412
n.Event.Add/r.handle@ https://XXXX/UI/scripts/main.js:2:11234
There is no license assigned to the host.
Kind regards
Patrick

Note that at the time where the customer Host are just an experimental tool and should not be used in production environment, if you use the license free hypervisor that you really need to use the vSphere Client.

File not found error when opening a virtual machine (from No-Time Machine backup)

Hello world
I have a problem with my installation of Fusion 2.0.6 on my iMac to Snow Leopard related to a "file not found". I did my best to analyze the positions of the community to see if anyone has experienced this before. I found several posts and tried the suggestions in these posts, but I have not been able to solve.
I'm trying to restore from a full backup of my XP VM. It's not a backup Time Machine; just a straight backup of VM together using SuperDuper (part of my nightly backup routine). To restore, I copied:
-> BACKUP/users/John/Documents/Virtual Machines/Windows XP Home Edition.vmwarevm
for -> MacHD/users/John/Documents/Virtual Machines/Windows XP Home Edition.vmwarevm
Merge, I opened the Windows XP Home Edition VM, only to get the error:
«File not found: Windows XP Home Edition-000005 - s001.vmdk.» This file is required to power on this virtual machine. If this file has been moved, please provide its new location. »
I find the file hard (what is there) and get the same error message several times.
Interestingly, when I try to open the same VM from the backup location, I also get the same error.
Really stuck now and don't know what to do. Any help that can be provided would be greatly appreciated.
Thank you
John

It seems that the latest files are missing. The virtual disk which I guess has a size 5-6 GB provisioned consists of 3 files, of which 2 are missing for snapshot 000005 (Windows XP Home Edition-000005 - s002.vmdk and Windows XP Home Edition-000005 - s003.vmdk). Unless you have some backup, your options are limited and you will need to go back to the last instant whis is dated March 2012.

Windows XP Home Edition - 000005.vmdk descriptor file (text file) will show the files that make up the virtual disk (the Flash disk in this case).

André

2 VDR "impossible to create the snapshot for < system >, error-3960 (cannot suspend virtual machine).

We test VDR on our ESXi 4.1.0 cluster 381591 and we have a few backups to a test Windows 2003 server and a Linux server and they backed up fine. We have a backup of a Windows 7 computer virtual test and we had a bunch of these errors...
Failed to create the snapshot for systemname, error-3960 (can not suspend virtual machine)
Which is strange because I can go in vSphere client and manually create a snapshot and remove without problem. Any ideas on why this is happening?
Thank you

You can try to set the 'disk. EnableUUID' to 'false '.

Look here:

http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1031298

Paul

error message 151/151 (registry\machine\components)

the above message came on my laptop E-system 4115C, which means that it's like that while loading Vista

Hello

1. are you able to boot to the desktop?

2 did you change on your computer before the show?

3. What is the full error message?

You can access for more information on this event.

Access the link below to learn more about how to access the event viewer.
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

Method 1: generally, 151 issues could be caused by infections of spyware and adware or computer.

I suggest you make a system full scan just to be sure.

Here is a link that will give you information on how to perform a full scan of the system:
http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

Method 2: Try to perform the recovery of Windows system restore (System recovery) environment.

Reference: http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

Restore the system to a date that worked very well. The following link helps you accomplish the restoration of the system: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

Windows Fax & Scan Error Message "the remote fax machine did not respond in time, and the call is completed."

I recently started using Windows Fax Scan & on Windows 7. The first days, I have not had any problems receiving faxes. Now every fax I want to receive declares, "the remote fax machine did not respond in time, and ended the call." How can I solve this problem? It allows once 5 of 7 pages to receive. Any help would be great.

It worked for me
(1) open my computer-> Control Panel-> modems Options and.
(2) on the Modems tab, select your modem from the list, and then click Properties.
(3) in the Advanced tab, click Change default Preferences.
(4) the speed of the Port is by default 115200; change to 9600 and see how it
going.

Web client Outlook fails to add attachments when you access non-Microsoft machines

Windows 2003 web server fails to add attachments from Apple or Linux workstations.

Microsoft really needs to do better to prevent these types of errors, that these kinds of things smack of anti-competitive behaviour and give the impression that Microsoft is actively engaged in illegal anti-competitive practices.

Hello Arnold,.

Welcome to the Microsoft community.

There is a separate forum that can deal with issues related to Windows 2003 web server, I recommend you to view the query in the Windows server forum.

Here is the link:

https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

If other questions in Windows, simply reply, we will be happy to help you.

Thank you.

Set up printer Laser HP LaserJet P2015d on non-hotes machine by local railway

I want to install "HP LaserJet P2015d Laser Printer" attached via USB to the PC of my colleague who is running Windows XP, 32-bit operating system.

My PC has Windows 7, 64-bit operating system.

Please indicate the procedure to properly install this printer.

I read on the internet that I need to create a virtual USB port USB001.

But I am not clear with it.

How can I create "USB001 virtual USB port?

PS: The same printer was connected to my system earlier and it used to work properly. I connected the printer via the Local port, but I guess the problem is the compatibility of the driver or so. Sometimes, it will display the error when I give a print job. This scene reproduces a number of times today. I don't know the reason for this error. That's why I want uninstall and install correctly.

N ° you must connect to this printer with the name "shared" network (\\win7\printer)

errors on a non-awdl machine awdl0

Similar Questions

Unable to Boot the BIOS since then using MXI Express http://digital.NI.com/public.nsf/allkb/05B7131814A5DDA38625710F006BB098?OpenDocument

Maybe you are looking for

Unable to Boot the BIOS since then using MXI Express
http://digital.NI.com/public.nsf/allkb/05B7131814A5DDA38625710F006BB098?OpenDocument