eSATA - No. Hotswap - connected disks go to sleep - BSOD

Similar Questions

• Wireless network is disabled by the hp connection manager after hibernation, sleep etc.

  Wireless network is disabled by the hp connection manager after hibernation, sleep and sometimes when I use the computer. I can't see preferences in HP Connection Manager to fix this, or Windows power management.

  What is the solution to keep the network wireless activated ALL THE TIME?

  Edition of the HP Connection Manager does not work, so I can't activate wireless again!

  My computer:
  HP ProBook 4530 s (new)

  Windows 7 Pro (included with the computer)

  No other power or utilities wireless isn't installed, just the HP utilities installed at the factory.

  In the hope of a quick solution.

  Thanks in advance.

  -Mikael Noerrelund, Denmark

  There is a setting in Connection Manager > Preferences > power to the device , which CAN be assigned to turn off the wireless / Bluetooth when you have left the connection manager.  You must Select / SET parameter.  You can see, just in case...  I never heard talk of the Connection Manager turn off wireless, unless it was to make it to the exit.

  You can do the following in the Device Manager to leave the power to the wireless and Bluetooth devices:

  Control Panel > display icon > Device Manager > network adapters >

  Right click on the WiFi link (Intel) (wording may vary) >

  in Properties > Powermanagement >

  Clear the check BOX "Allow the computer to turn off this device to save power".

  Ok

   

  Do the same for Bluetooth...
  

   

  I hope this helps...
  

• Internet connection lost on mode 'sleep'

  I often get my internet connection disconnetcted, especially once the computer is switched mode "Eve". I have windows vista OS and a D-link router and cable internet service. I can restore the connection diconnecting the power to all devices and "restart". This problem is more common, and now I have also reset the network card. I have already disabled the ability of the computer stop the connection when it goes into mode 'sleep', so I am now at a loss what to do next. Any help would be appreciated. Thank you!!

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in
  Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network adapter power management,
  WiFi, Modem and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem getting my WiFi connection after the mode 'sleep'

  After my computer wakes from sleep mode, I click on my WiFi network every time to get on the internet.  If I restart my computer, it detects my WiFi network and connects ok.  It's just at the time when it wakes from sleep.  I tried many solutions that people have posted for example to remove some files from my SystemConfig., but have had no luck.

  Hi joycefromil,

  I understand that your Mac has problems automatically re-login to a Wi - Fi saved after wake up from its sleep. I can understand the concern here; It seems that it would be a bit tedious to have to re - connect manually whenever you wake your Mac from sleep. I'm happy to help you with this problem.

  As a first step, try to remove your Wi - Fi network in the preferred networks list and then add again using the steps here:

  macOS Sierra: choose the preferred Wi - Fi networks

  Try to test for the problem to see if it persists. If so, I recommend that you try to start your Mac in safe mode and test for the issue. Once you're done test in safe mode, restart your machine normally and try test again to see if the problem has been resolved.

  If the problem persists in safe mode, try to create a test on your Mac user account to see if the problem is here. This will help to further isolate the issue. Take a look at this Web site for more information:

  How to test a question in another account on your Mac - Apple Support

  Take care!

• How can I remove the requirement of connection to the mode "sleep"?

  I open Sys Pref and removed the check mark for the connection after an hour of sleep or screen saver begins and password request keeps happening when I opened the iMac after more 1 hour of downtime.

   > System Preferences > Security & privacy

  Click the general tab

  deselect 'Require password x Minutes after the start of the screensaver or to sleep'

  Click on "deactivate the screen lock.

• slow to connect to WiFi after sleep

  I have a Mac Book Pro late 2008. Just installed a new SSD Yosemite running. It takes up to 30 seconds to connect the ti WiFi after sleep.

  Try to purge your list of favorite networks and dragging the networks you really want at the top of the list

  System Preferences-> network-> wireless-> advanced-> preferred networks

  The Mac will go through the list looking for networks to connect to in the order that they are in the list.  Reduce the size of the list and make sure that those you really want is near the top of the list.

• Satellite M200 - problem detection USB connect after waking from sleep mode

  Hello. I need help! I'm having trouble with the laptop Satellite M200 (Vista) - after the awakening of the mode standby, none of the things connected to the USB port is detected, even if they worked perfectly before sleep. No mass reader, mouse, iPod is detected - even the SD for ready boost is not detected. Simple plug in and out calls any action (window AutoPlay etc.). Sounds like a BIOS problem but my laptop is completely up-to-date with all drivers and all the rest (of Windows and Toshiba support website). Would appreciate any advice. See you soon.

  > fully up-to-date with all the drivers and everything else
  The latest version of the BIOS too?

• Wireless connection lost in mode 'sleep'

  I noticed recently that my Electrify will lose its data and connection Wifi when it is in "standby" quite a long time. I sleep forever set policy and it will show again only 4 bars of cell tower and that's all. After he wake up from his sleep and giving it some time, it will reconnect either 3g or wireless. What I have set wrong it will not keep a connection mode 'sleep'?

  Try the sleep at night...

• laptop loses connection w/web when sleep mode is activated.

  When my laptop goes to sleep, I get an error msg "windows cannot display Web page" when I wake up it. Troubleshooting problem is says cannot find a problem or "dns server is not responding. laptop usually functioning normally afterwards. Why my computer laptop do?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that this laptop loses the Internet connection in mode 'sleep'. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

   

  1. what operating system is installed on your computer?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Please follow the methods and mark the question below:

  Method 1:

   

  Follow the steps in the link below.

   

  Network troubleshooting event logs to solve network problems:

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 2:

   

  Follow the steps in the link below.

   

   

  Network troubleshooting event logs to solve network problems:

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• No internet connection after hibernation or sleep.

  Hi group, hope you can help me.  When I wake this computer from sleep or hibernation, I have no internet connection.

  Activation of the troubleshooting tool tells me I have an ethernet cable disconnected, I don't of course.

  I remember, when you use the beta version of the windows operating system 7, I did not encounter this problem.  So now I find myself having to restart every time I come out of standby or sleep.

  Any ideas one?

  Thank you

  DominicP salvation, well, that seems to have worked!  Thank you, you deserve these medals.

• Windows 8 I lose the internet connection after waking from sleep mode

  My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.

  Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)

  I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).

  Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:

  1. Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
  2. Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value

  * Not sure about my translation of terms/options used above - I am not in an American version

  If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.

  + Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...

  Hope this helps

  See you soon

  LZ.

• Portege R830-10R: No. USB connection after recovery from sleep mode

  Nice day!

  I have experienced the problem depending on my Portege R830-10R for a long time.

  Quite often, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  After awhile, like 10-15 minutes of work (or), the problem is solved by itself, but normally, it is not the case.

  If I try to send the laptop to Hibernate or "standby mode" again, while this problem is active, allows to say, it not put into hibernation and crashes on a midway with a black screen - so I have to stop it manually, and then start again.

  Normally, the only way to solve the problem is to restart, but the issue comes after the next "standby".

  Someone has something like this? Any solution available?

  Hello

  > Quite frequently, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  Have you noticed this behavior from the first day of purchase?

  Only special USB devices assigned as USB flash memory stick or USB HDD or are
  other devices such as the USB mouse or USB keyboard has also affected?

• Why my wifi doesn't connect after the mode 'sleep'?

  When I close the lid on my laptop and open it again my wifi does not connect unless I reboot. I have recently installed windows 8 and that's when the problem ensued. My laptop is a hp envy 15-3247nr with all windows 8 drivers installed and updated including the BIOS. It's okay I'm trying, my wifi option remains grayed out even to disable airplane mode. The f12 key stays orange and does not come on until I restart my laptop in a couple times. Help, please.

  (all drivers are up-to-date and in working order and Yes, the power of the network adapter settings have been changed to not save energy)

  Yes, I tried the utility intel to uptate pilot and he was one of the network drivers and windows 8 but when I tried to install it, an error message would come to saying that I had so he couldn't install the supported operating system.

  And Yes, I went into the bios and set all my settings to the default values and after that point it began to work.

  what I specifically made back my driver of network to an earlier version, and then I went into my bios and changed my setting of network adapter the opposite of what they were (activated or deactivated the opposite), restarted my computer (does not solve my computer), so then I went back into the bios and reset all settings to the default values, and after this point is at the beginning of my wifi to connect without having to restart my computer and so far so good.

• How to p2v server with FC HBA connected disks?

  IM new to vmware.

  Our ESX 4.0 environment is connected to an EMC CX4 via CF system.  I cut a couple SATA LUNS and attached to our ESX environment and have successfully P2V had some servers on data warehouses, I created on these LUNS.

  Now, I have a server that has 2 FC HBA connected to a brocade switch.  This server has its 'E' drive mapped to a LUN SAS on the CX4 by fiber, using EMC Powerpath.

  I want this server P2V, but once that one would P2V, how to reconnect the drive "E"?  Can the VM also use the HBA using the ESX servers?  (don't know how I would want that area...)

  Can I move the LUNS for the server in the same zone as the LUNS ESX and they use a ROW for this virtual machine?  If I do this, VMware reformat this LUN?

  Any advice?

  Thank you!

  Hello and welcome to the forums.

  Can I move the LUNS for the server in the same zone as the LUNS ESX and they use a ROW for this virtual machine?  If I do this, VMware reformat this LUN?

  Yes, it's exactly what you can do.  Formatting of this storage wouldn't be a problem if you tried to add storage as a data store, as opposed to add as a RDM.

  Good luck!