ESXi 5.5 GA-6PXSV4 USB 3.0 Ports after loading

Similar Questions

• Bad partition VM ESXi 4.1 crashed on USB

  Help!    My ESXi 4.1 on a USB flash drive installation has been corrupted. I did the repair and am currently connected to the management console. Im trying to understand the editing options of the data store on a Dell 2950.  Who should I choose "keep the existing signature" or "assign a new signature" I need to recover my VM.

  Thank you

  "Keep Existing Signature" should work for you

  Just make sure that the signature is not collide with an existing one. If it collides it should simply not get on its own.

  "Before attempting the will, make sure there is no machine virtual running off this VMFS volume on any other host, as these virtual machines can become invalid in vCenter Server inventory and will need to be registered again on their respective hosts."

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1011387

• Upgrading to ESX 4.0 host autonomous with local storage to ESXi 4.1 on a USB

  We have a stand-alone host with a single raid array that is local to the server at a remote site from ours.  The question of what I've done research, you need to reformat the raid array if you install ESXi 4.1 on this host.  Since there is no shared storage, the only option would be to copy the data from one server to another, or maybe install ESXi on a USB key.

  It seems to work fairly well in a test environment.  Are there warnings that I may have missed when I take a system that can be started locally on ESX 4.0 and change it to boot from a USB key with ESXi 4.1?  In my test environment, I know that you can not install ESXi 4.1 on a USB key, if this system had ESXi 4.1 installed on the local disk.  He ended up giving me the GROUP when he discovered another ESXi installation.

  Thoughts?

  Matt

  As you may have noticed a new ESXi installation will wipe away the installation partition.  If you have just a single Bay, then you'll want to go to the root of the USB.  If the data store was on a LUN or a separate table, then you'd be OK to install ESXi on ESX.  As long as the boot order is set correctly, you'll be fine.

  In my test environment, I know that you can not install ESXi 4.1 on a USB key, if this system had ESXi 4.1 installed on the local disk. He ended up giving

  me the GROUP when he discovered another ESXi installation.

  What kind of system did you use for testing?

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Satellite Pro C650: USB flash memory starts to load then crashes

  Hello

  I have my new Satellite Pro C650 laptop for about 2 weeks and there is already a problem with it.
  When I insert a flash drive into a usb drive, it starts to load, but as soon as it loads it crashes as if I disconnected, and then start loading again again and again until I have unplug it really.

  The flash disk works fine on other computers, so it shouldn't be the problem.
  Device Manager indicates that my drivers are ok.
  Is not only the USB flash drive mouse works fine when I plug in usb...

  Does anyone have an idea how to solve this problem?
  If so, thanks in advance

  Hello

  Strange in your case I recommend you test another USB key into the Satellite laptop. I know you have tested this stick in other laptops, but it would be interesting to know how the other USB key would be instrumented C650.

  I recommend in addition updated the operating system Windows and the BIOS to the latest status.
  In addition, you should go to Device Manager and delete the list of devices USB controllers. Then restart the device and wait for windows has installed again all the USB controllers.

• Satellite M50D - Has: devices of USB 3.0 not working in USB 3.0 ports

  I use 2.0 devices in the ports of 3.0 fine, but my 3.0 Flash Voyager USB3 8 GB device will not work. It connects then disconnects once, not appearing is not in the Device Manager to all.

  I tried to install the USB driver out this version of the site 2.0.10.273 - 130101 has for my model. It made no difference.

  Install Windows 8.1 system

  Any ideas? Thank you.

  You are able to use this USB through a USB 2.0 port?
  Check it out.

  But at this point its not easy to tell if its USB device issues or problem of USB port.
  If other external USB 3.0 devices work properly in the frame of your laptop, the problem is related to the Flash Voyager USB

• How to identify the port vs USB 2.0 ports USB 3.0?

  My HP Pavilion notebook PC (Windows 8) g6-2210us has 2 USB 3.0 ports and 1 USB 2.0 port.  How can I identify the USB 3.0 ports?

  Yes SS means Super Speed

• Tecra R840-10 t has no work webcam or USB 3.0 port

  Even if this [another thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=62061&start=15&tstart=0] has been marked as resolved, the problems remain, but are not related to the bone, hw-partners.

  1 week after that I got a Tecra R840-10 t (PT429E-00M007EP) of Windows 7 have frozen at startup and the fan run at maximum speed. All I could do was to enter safe mode. After a factory reset (reinstalling OS of the hidden HD partition), not even the safe mode worked!
  Took back to the store, 2 days later a local Toshiba representative referred to the store as fixed (they have updated the BIOS...)

  2-3 weeks later, same problem. I called Toshiba directly, they have picked up the laptop, took almost 2 weeks and sending parts of the Germany twice before they sent it. I had to call them to find out they were going to deliver the next day. So far it seems to be fixed, Windows has not frozen since.

  However, now, little more than a month after I bought this laptop from professional quality, I noticed that, on his return, the USB 3.0 port (as long as this port) and the webcam does not work. They do not appear in the Device Manager, update their drivers through page for the download of Tecra yields nothing (and you have to go through hoops to actually install the webcam driver), nothing. It's as if they did not exist. I guess that any material they brought in wasn't exactly in perfect condition, or someone forgot to plug it into some pine trees.

  I tried several Linux LiveCD as well, they all recognize the material to varying degrees (being the most comprehensive Debian), but no recognize the USB 3.0 port or the webcam as well.

  Not an OS problem. Call them once again, waiting for a response from a representative Monday morning. Seriously considering to move directly to a repair center and asking the complaints book. There is no guarantee that this laptop won't break again.

  Not a happy camper.

  Hello

  > I tried several Linux LiveCD as well, they all recognize the material to varying degrees (being the most comprehensive Debian), but no recognize the USB 3.0 port or the webcam as well.

  Have you tested this with Toshiba configured OS?
  It would be interesting if Windows 7 would get the same problems, recognizing the USB 3.0 and the webcam

  by the way: this is a user forum to...

• External Toshiba HARD drive not recognized on USB 2.0 ports, but only on USB 3.0

  Hello

  I have a Toshiba drive external HARD 750 GB USB2.0/USB3.0
  Now, this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port.

  I have try on port USB2.0 computers different (desktop, laptop) but it doesn't work. The LED is the lightning, but the drive does not appear in the file Explorer.

  You have any ideas?

  Thank you

  > Now this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port

  USB 3.0 port 900mA feeds. The USB 2.0 port common provides 500mA.
  I think that the HARD drive needs more 500mA power in order to work properly.

  So if you want to use the HARD drive on USB 2.0 ports, I recommend you to use a USB Y cable which allows to connect the HARD drive to two USB 2.0 ports

• External USB 3.0 HARD drive does not work on USB 3.0 port

  Hello guys,.

  I have a problem with my external HARD drive and the problem is that it is USB 3.0 feature does not work in my computer.

  The curious thing is that it works very well in the SATA port or a normal USB 2.0 port.

  Y at - it a failure with the HARD drive or is there something wrong with my motherboard (M5A99 fx pro r2.0)?

  Thanks in advance.

  From my point of view of the few is not HARD drive problem because the HARD drive operates in a USB 2.0 port.

  I m wondering if you tried to update the USB 3.0 driver.
  Have you tried this HARD disk in another computer / USB 3.0 ports?
  I think that its worth a check.

  Also, I read on some problems of USB 3.0 controller from different manufacturers.
  Sometimes, it might be possible that some problems of compatibility between different devices may arise.

• Toshiba Store Art 4 USB 3.0 1 TB works not with USB3.0 or USB 2.0 port

  Hello
  I have a big problem with my external hard drive and I hope someone can help me.

  Here's the thing:

  I used my external drive only on computers that don't have any port usb 3 and all worked well. The drive has been used only with usb ports 2.

  Now, I got a computer with a usb port 3 and I was happy to be able to use my external hard drive at full speed.
  Has been fine until I wanted to transfer a file using my drive.

  The disc has been recognized either of usb ports 2. The NTFS partition is a partition BRUTE! I had to ' chkdisk/f G:' to make it work again on my usb ports 2. And some files were missing!

  Then, back on my other computer (usb port 3), the contents were not the same! I mean some of the files that I deleted when it is plugged into usb 2 returned when plugged usb ion 3! And then, back to the usb 2, partition became RAW and I had ' chkdisk/f G:'... once again!

  So, to make it as simple as possible, after some testing, it seems that the drive can only be used on the usb ports 2-only on ports usb 3 but can not be used at a time, which is very annoying for a portable external hard drive.

  I tried to format the drive to my usb port 2 and return on the usb port 3, the content came as if I had never formatted it and then back on the usb port 2, the RAW score again...

  I use Windows 7 and 8.1 Windows computers.

  Someone at - it experience that? What is the drive (Toshiba Store Art 1 TB USB3 4)? What is the USB 3 specification? Is - Windows 7 or 8.1 drivers?
  And above all: what can I do?

  Thank you very much!

  This external plug & play Toshiba HDD supports two USB standards: USB 3.0 and USB 2.0
  HARD drive around needs bus power 900mA to work correctly.

  The USB 3.0 port supports this standard 900mA. The USB 2.0 port allows only to 500mA.
  If in case the HARD disk is not working properly connected to the USB 2.0 port, I recommend you to use a USB cable to Y in order to connect the 2 ports USB 2.0 HARD disk.

  I have no idea why the content on the HARD drive is different, but from my point of few of the USB standard does not affect content.

  In my opinion, the HARD drive wasn't working properly using a USB 2.0 due to the low power.

  By the way: this HARD drive supports some additional features like the ability to oversight function and monitor to alert of the disk space that sends a alert when there is not enough available storage space.

  For advanced users, Toshiba has added the ability to customize the backup routine, including the ability to select only the most common file types for backup and change how many times a backup takes place.

• EliteBook 8470p: EliteBook 8470p USB 3.0 ports driver not installed in Window 7 Ultimate 32 bit

  Dear Sir.

  I am facing problem in installing driver for USB 3.0 in EliteBook 8470p on Windows 7 Ultimate 32 Bit Port. So please say if 32-bit is taken in charge or 64-bit supported for USB 3.0 driver.

  its two USB 3.0 ports doesn't detect the USB 2.0/USB 3.0 or USB key (Flash DRIVE, portable, etc.)

  Please answer soon

  Hello:

  The usb controller you model posted ID indicates that your laptop is not a p 8470, but a p 8460.

  You need this driver usb 3 to this ID.

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe

  The 8470p have the Intel USB3 controller and the 8460 p have the Renesas Electronics USB 3.0 Host Controller.

  That's why I finally asked for hardware ID, because if you had a 8470 p then or the other of these Intel drivers I posted should have worked.

• Compatibility issue on Satellite Pro A60-129 and USB 2.0 Port Replicator II

  It is: are they compatible? I bought the Port Replicator, loaded drivers and plugged.
  All the lights come on as it should on the 4 USB ports, and the device manager says its working properly. But if I plug the router in there (instead of directly into the USB port of the laptop), or if I try to plug in the mouse inside (once again, instead of directly into the laptop) or work.
  He also seems to have some effect on Windows - where when I try to stop the machine, it "hangs" in the section "Logging Off", until I physically unplug the duplicator.

  Any guidance appreciated.

  Hello

  I don't know what the problem is here, but you should try to download and install the latest available driver from Toshiba support page Package. You can find it under http://eu.computers.toshiba-europe.com > support & downloads.

  Product type OPTIONS
  Family CONECTIVITY
  Series of products DOCKS & DUPLICATORS

  You will find driver Package for Windows XP Home edition.

  By the way: perhaps some additional software for mouse blocks or a modem. Who knows

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• Vodacom k3772-Z not detected on Satellite L755 USB 3.0 port

  Good day to all,

  I kinda a strange problem, the company that I work received point on the toshiba Satellite L755 PSK2YE and a box of vodacom K3772-Z modems for distribution to our customers.

  We picked up that these modems are not detected at all when plugged in the port of USB3 laptops left side (we tried 3 modems on machine Ong 3 with the same result each time)

  Modems work perfectly well when it is connected to the usb ports on right 2 and all the rest that we connected to works of 3 usb port very well including older models of modems.

  I also tested the modem on another machine of 3 USB (also using the usb controller 3 renesas) and it works beautifully.

  I have notcied that if you disable the usb controller 3 on the laptop and turn it back on with the stick of 3 g connected to the unit is detected correctly however if you unplug in and try again once it does detect it yet.

  It's using the latest drivers and firmware.

  I tried to find a solution online but had no chance.

  Any ideas what could be the cause?

  > Modems work perfectly well when it is connected to the usb ports on right 2 and all the rest that we connected to works of 3 usb port very well including older models of modems.

  From my point of view it would mean for computer laptop USB 3.0 port works correctly and, possibly, there is a compatibility problem between the modem and the USB 3.0 port. Maybe you should contact check the modem manufacturer support page for more information

  I read on some forums that many people had problems to install this modem using Win 7 64 bit with 32-bit system was not a problem, someone used the drivers released for modem K4505.

  Someone else solved this facility a 10.2 Vodafone
  + 1. Go to start menu.
  + 2. Run regedit +.
  + 3. Open this key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E96D-E325-11CE-BFC1-08002BE10318} +.
  + 4. In this key, search for the string of Installer32. +
  + 5. If missing the Microsoft registration key, the key must be added manually. +
  + 6. Create a string value named Installer32 and assign the mdminst.dll, ClassInstall32 +.
  + 5. Save the regedit +.
  + 6. Open the device manage +.
  + 7. Find the modem with the problem; uninstall it and let windows detect it again (or search the hardware changes). +

• USB 3.0 port does not work at the speed of the USB 3

  When I plug in my external hard drive seagate-freeagent I get this message: "this USB mass storage device can transfer information faster if you connect it to a superspeeed USB 3.0 port» The computer has 3 USB ports, but none of them are the insert blue plastic that are supposed to have usb ports 3.

  I want TO Ultrabook 4-1043cl I thought has USB 3.0 on this subject. According to these specifications, it must have 2 usb3 and 1 usb2.

  http://support.HP.com/us-en/document/c03367057

  My computer corresponds to the form above. The 2 usb ports on the left have a small "ss", painted between the 2 of them. A usb port on the right has a small lightning bolt painted there. As I said earlier, none of them have the blue plastic insert. I get the same message "this transfer faster if connected to usb 3.0...» When I connect the external hard drive to one of the 3 usb ports. All ports to transfer data, connect to disks, goodies, etc. They just don't transfer to 3.0 speeds.

  I am running Windows 7, not windows 8 and I keep windows up-to-date.

  I found this post talks about a Texas Instruments XHCI controller faulty, but my controller is an Intel USB 3.0 Host Controller stretch.

  http://support.HP.com/us-en/document/c01893385

  So I wonder why the usb 3 seems to work and how to operate?

  Thanks for any help you can give.

  Hello

  You won't lose me. I'm probably in a different time zone you are.  I live in Europe.

  If you still have the unknown device follow these steps:

  Open Windows Explorer and locate the SWSetup folder.

  Expand the folder, find the sp56724 folder and double-click it to open it.

  This is where the driver for the device unknown (USB 3.0 host controller should be).

  Call the Device Manager.

  Right click on the unknown device and select Update driver software.

  In the next window, select browser my computer for driver software.

  Now, you can choose to let the operating system locate the software or the path to the sp56724 folder yourself. In both cases, ensure that a signed driver is selected.