Ethernet port does not

Similar Questions

• On Apple TV Ethernet port does not

  Model: A1625 (64 GB) | tvOS 9.2.2 (13Y825)

  The House has wired Cat5 taken and connects directly to the ISP router.  I don't have any fancy network equipment.

  I was away on vacation and had unplugged the TV and Apple TV surge protector.  I went back home and plugged everything in and powered the TV and Apple TV on and Apple TV connect to the network via Ethernet.  At the time the tvOS was 9.2.1.  I have the following message:

  "Error ".

  Your device may not be connected to the Internet.  Please make sure that your connection is working, and then try again.  "Code:-1009"

  I've tried unplugging, reboot, new cables, etc., nothing worked.  Apple TV connects via Wi - Fi so I did the software update to bring the tvOS up to date with version 9.2.2 said Apple TV to forget the wireless network and all restarted and it still does not connect.  Appreciate any ideas?

  Test the specific Ethernet jack that you use with ATV on other equipment, such as a laptop computer.

• Usb and Ethernet port does not work after update of windows 8.

  Hello

  I have a new HP laptop, and two days later the window updates automatically and my USB and Ethernet port stopped working. I returned it and got a new laptop and it is same thing. every couple of days that he update and refresh back to the old settings without losing my documents. I can't keep install my apps every two days after the update. Please let me know what I can do to update without having this same problem. If there is anything I can do so I have to return the laptop.

  Ben.

  Hi Ben,

  You can install the Windows updates manually by changing the settings of Windows updates.

  1. Open Windows Update in Control Panel by dragging it from the right edge of the screen, typeSearch (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clickingSearch), get into Windows Update in the search box, by typing or clicking onsettings and then type or by clicking install optional updates.

  2. In the left pane, tap or click change settings.

  3. Under important updates, click the following option:

     Download updates but let me choose whether to install them.

  4. Under recommended updates, select the give me updates in the same way I receive important updates recommended , and then click OK.

  Manually install the Windows updates and find the problem causing the update.

  I hope this helps.

• Second Airport Extreme in Bridge mode, ethernet ports does not

  I have two routers, I want to use. The first is a time Capsule (old model 2 TB) connected to a single cable modem. The second is an Airport Extreme (also a little older, the 'flat' last body model until they began to sell towers). Both have the 7.6.4 firmware.

  The problem is that I want to use the second to extend my network, but I don't want to use wifi. I have the second of the WAN port connected via an Ethernet cable to the network served by the time Capsule, but when I launch the extreme in Bridge mode with a Mac Pro plugged into one of the ports ethernet to the extreme, it says it is not connected to the net.

  Y at - there a trick to getting the second router work ports ethernet when used in this way?

  Thanks in advance!

  Deleted message, thread posted by mistake.

• Re: Satellite L40 - 14N - Ethernet port does not work

  Hello

  My ethernet LAN doesn't work anymore - laptop computer signals that it is fine - when I plug a cable in there still says no cable attached.

  I've updated all the drivers - is their a FN key that turns off? or can someone help me?

  What laptop Satellite you have exactly?

  The LAN port can t be enabled or disabled with a FN key. It is possible that wireless (FN + F8).

  Have you tried to update the BIOS? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• My Ethernet port is not running iMac mid 2011. Pls help me.

  Hi, I have an iMac 21.5 "mid-2011. My Ethernet port is not working. Is this a software problem? Pls help me.

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  Try another ethernet cable.

  He still does not? A report with the information more wrote an effective communities of Apple Support question

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• One of my usb ports does not work. A top forward on a MacPro 3.1

  So I plugged it in a charger to charge a battery. He went for about 1/2 hour then I got a message a lot of power, port and it will stop the port. Something like that. So now the port does not at all with any device. Can this be reset?

  Running OS 10.6.8 snow leopard. 3.1 MacPro Tower.

  Try a reset of the MSC...

  MacIntel: Reset of the controller (SMC) system management

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Tecra A11 - serial port does not

  I have a Tecra A11 running windows 7 Professional (32-bit).
  My serial port does not seem to work as I am no longer able to connect to the industrial PLC automation which requires the connection to the serial port for programming.

  Some of the software I use is a RSLinx, Easysoft and others.

  Any help on this will be greatly appreciated.

  Hello

  The serial port is properly recognized in Device Manager?
  Do you have signs of yellow exclamation point there?

  Try to remove the serial port of the Device Manager and reboot the machine to get this recognized again port.

• S-Video port does not work on Tecra M5

  Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

  Hello

  There is not much to do
  (1) Please make sure you use a S-video S-video cable and connect it to the TV
  (2) turn on the S-video TV port - VERY IMPORTANT
  (3) use the FN + F5 key combination to switch to TV

  All that s!

• Ethernet controller does not work on the Satellite L645D-S4030

  Basically, I got my windows 7 reinstalled on my laptop due to virus... Now I have a problem with the Ethernet controller does not, I checked my device manager and there is a kind of yellow dash through the icon... Someone knows what is the problem and how can I solve this problem?

  BTW, I have a SATELLITE L645D-S4030

  Hey Buddy,

  Hmm generally if you reinstall Toshiba Recovery disk Windows all drivers will be installed too because the disc contains a picture of the factory settings.
  Or you used another drive?

  Yellow exclamation mark can mean that there is a driver problem and so it would be advisable to reinstall the LAN driver. Follow the link Timox. After the driver is installed, restart your computer and check again in Device Manager. The yellow exclamation point should normally be gone.

• HP 15-AF006AX: USB 2.0 port does not work

  Hello

  I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.

  and I am not finding a driver for this, can you help me for this problem

  Thanks in advance

  Hello:

  The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.

  You want the first file on the Web page.  Install and reboot the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064