Explorer Windows ha stopped working

Similar Questions

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

• Explorer Windows has stopped working. Name of the damaged file: wmp.dll

  Original title: Windows Explorer has stopped working

  There seems to be a lot of discussion on this issue.  I tired some of the patches, but some of my numbers seem different from what other people have.  The problem is on my laptop.  I try to connect to my router and have internet access.  My office is a new computer with Windows 7 installed.

  When I try to open my network center and sharing on my laptop, the computer thinks for a while, and then I get the Windows Exporer stopped working window.

  ProblemEvent name: InPageCoFire

  Error state code: c000009c

  Type of media loopholes: 00000003

  Name of the damaged file: wmp.dll

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 4105

  Additional information 1: fd00

  Add information 2: ea6f5fe8924aaa756324d57f87834160

  Add information 3: fd00

  Add information 4: ea6f5fe8924aaa756324d57f87834160

  I am at a loss!

  Thank you

  Kevin.

  Hey Kevin,

  You will need to run the command above in the elevated command prompt.

  Refer to this step help: How to run a command with elevated privileges?

  After you run the command of high fashion, you should get the message, "" DLLRegisterServer in wmp.dll managed."

  Also, you can run the method 2 regardless of the success or failure of the method 1. Please try these methods first and see how it goes.

  Normally, it is appropriate to fix this problem by running SFC scan and you would not need to copy the file.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix Explorer Windows has stopped working...

  Afer resolve about a dozen questions, I have all issues resolved, except one, the dreaded "Windows Explorer has stopped working, Windows is checking for a solution to the problem..." "click on in Windows Explorer, of course. On right click, the error message appears, followed by another message error "Windows restart...," then is firm and does not restart?  Since it seems there are a lot of variations or at least several methods to solve the problem, someone the precise solution or know what is the cause of this problem?

  Found this digging in the archives, 2009, by Chief Brody, fixed problem successfully.

  Deactivation of the CEIP Customer Experience Improvement Program

  1. click Start and type gpedit.msc in the search bar or on the command RUN

  2 now navigate to

  Computer configuration-> administrative templates-> system-> Internet Communication management, and then click Internet Communication settings

  

  3 locate Turn off Windows Customer Experience Improvement Program , double click or right click Edit.

  4 click Activate . Apply and Ok and close gpedit window.

  http://www.Blogsdna.com/2137/fix-Windows-Installer-Explorer-update-has-stopped-working-in-Windows-7.htm

• Explorer Windows 7 stop working and restarts

  Hi, Win 7 Explorer systematically will stop working if I Rt click on one of my drives and select [Properties].  I put in a boot environment and there is the same problem. News from the event viewer are as follows:

  The failing application name: Explorer.EXE, version: 6.1.7601.19135, time stamp: 0x56a1bbe2

  Name of the failed module: SHLWAPI.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c9ab

  Exception code: 0xc0000005

  Offset: 0x000000000000ae72

  ID of the process failed: 0xe98

  Start time of application vulnerabilities: 0x01d17737117cf4a3

  The failing application path: C:\Windows\Explorer.EXE

  Path of the failing module: C:\Windows\system32\SHLWAPI.dll

  Report ID: f8005a32-e32a-11e5-b3f1-5404a62b1ba9

  The problem occurred only while working in Win 7 Explorer window and the event seems to point to SHLWAPI.dll. All drivers are up to date, as well as all windows updates.  Do you have any suggestions?

  How to do a repair installation to repair Windows 7

  This will show you how to do a repair installation (aka: install upgrade on-site) for fix your currently installed Windows 7 and preserve your user accounts, data, programs and drivers of the system.
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  No-reformatting of Win7, non-destructive reinstall
  http://WindowsSecrets.com/top-story/WIN7S-no-reformat-nondestructive-reinstall/

  ================================================================

  Need to install a Windows 7 Installation DVD to repair

  February 6, 2015, Digital River links for different versions of Windows 7 are functioning is no longer, as an alternative (as long as you have your product key) you can use the link to the Microsoft recovery software web page: http://www.microsoft.com/en-us/software-recovery

  Note: You may receive a notice to connect with the manufacturing of PC if you have a key OEM supplied with your computer, but it can't hurt to try. Also note that this site may return an incorrect language for the product key that you entered. Please read the articles in this wiki below are a possible solution.

  More information and alternative resources:
   
   
  If you have a friend with a version of "Retail" (Full or upgrade media, only in the media that you don't need their key) of the installation DVD (should be the same as your key was for: Home Premium, professional or Ultimate) it will work with your "Retail" or "OEM" product key, if you need to reinstall or repair Windows.

  Read the following articles on the Wiki:
   
  Create your own ISO file from a Windows 7 installation DVD:
   
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/create-your-own-ISO-file-from-a-Windows-7/a344df19-b535-4420-a58f-4898ac7416ec

  How to create a Windows 7 universal installation DVD or a USB Flash drive:
   
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-create-a-universal-Windows-7-installation/15183b74-4478-4647-84dd-6d6431f1cfa4

  How to get Windows 7 spare filter
   
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-obtain-Windows-7-replacement-media/f749fc0e-8bc7-40ba-8d8e-38572cbe6669

  J W Stuart: http://www.pagestart.com

• Explorer Windows has stopped working.

  I don't have an error code. Explorer Windows stopped working altogether, and I have no windows on my computer. It started after installing SP 2. for vista. I have an Acer Aspire 5535-5452 and have had problems in the past with updates. I had to recover my computer many times sence buying this computer in 9 / 09. not even 6 months yet and this is not the time to throw. I am not happy with this system or with vista. But my school said I should use this system.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• EXPLORER WINDOWS HAS STOPPED WORKING. EXPLORER WINDOWS RESTARTS. RIGHT CLICK

  Have Windows Vista.  When right click on photos, files photo or zip files error message appears: WINDOWS EXPLORER has STOPPED WORKING.  EXPLORER WINDOWS RESTARTS.  This error message also appears when you use the Remove button to delete the photos.  I did a registry cleaner, disk/driver cleaner, catering to a specific date.  I get to the point of confusion when searching for answers.  All opinions on the ShellExView or should I do a clean boot?  Help!

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Explorer Windows has stopped working when you open the folder movies

  Original title: about a week ago my windows Explorer began to close and restart but only when I try to open 1 specific folder... Help

  in the folder my documents, I have a folder called my muvies when I try to access it I get a window that tells windows Explorer has stopped working the TI restarts itself. also, if I try to change how the icons in this folder look same result, but not with anything else. I can access all my other files without problem

  Also, can you check here?

  Start > Control Panel > system and Maintenance > Problem Reports and Solutions > view problem history

  You can right click on some of the mistakes "Stopped working" "Windows Explorer" > view problem details

  What information is given?

• Explorer Windows has stopped working when I right click on the files

  When I need to click with the right button on folders, windows Explorer has stopped working.

  up to now, still can't use the right click menu ~.

  Yes, it's the details of the problem.

  Unfortunately, it does not identify the failing module.

  At this point, it may be useful to try to capture a dump of user of the explorer.exe crash mode.

  You can configure Windows to create dumps of user mode. First, create a System Restore Point.

  If you copy and paste the following text in Notepad and save it as a .reg file, then right click on the .reg file and select "Merge" to add to the registry, when the .dmp file explorer.exe plant should be created in the C:\CrashDumps folder:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
  "DumpFolder" = hex (2): 43, 00, 3A, 00, 5 c 00, 43, 00, 72, 00, 61, 00, 73, 00, 68, 00, 44, 00, 75,.
  00, 6 D, 00, 70, 00, 73, 00, 00, 00

  
  After Explorer (explorer.exe) crashes, you can, and then make the .dmp file available (provide the link) via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  More information on the collection of user-mode dumps:

  ("msdn.microsoft.com/en-us/library··· .a 85)

  You can also try to use ShellExView, as suggested by BurrWalnut, to try to eliminate a problematic third-party shell extension.

• Explorer Windows has stopped working Vista Service Pack 2 has begun with October 2011 updates

  I get the following message is displayed when I bring some lists of files in a directroy on my C: drive and also when you look at other directories on the other pc is my Vista machine. (other machines running XP and have no problems).  I do turn Norton Antivirus without any problems, you run malware and no problems to speak of.  This all started I think during updates October 2011 MS and I don't have any restore points left will support this far.  See more about messages I receive.  I was uninstall as many updates in October as it will unistall without effect.  Any suggestion on how to solve this problem. ?

  Explorer Windows stopped working

   

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Explorer.EXE

  Application version: 6.0.6002.18005

  Application timestamp: 49e01da5

  Fault Module name: StackHash_d9cc

  Fault Module Version: 6.0.6002.18327

  Timestamp of Module error: 4cb73436

  Exception code: c0000374

  Exception offset: 000b06fc

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: d9cc

  More information 2: 6fe3411f9375e5d417645fd299fa50dd

  3 more information: 04b 6

  Additional information 4: dd0cb01a2b153bc26250d3323a5ef24b

  Of course, it looks like you copy/paste the error in your first post.

  If it was Windows Internet explore (IEXPLORE. (EXE), it would not v6.0.6002.18005 (which is Windows Explorer in Vista SP2).

  In any case, Yes, it is time to "wipe n recharge."

• Explorer Windows has stopped working - every 30 seconds.

  Hi guys,.

  I hope you can help, I thought I would ask here first, but I have a feeling that I may just have to wipe the laptop.

  I have an Acer laptop with Vista Home Premium SP2 - 32 bit Sys.

  Suddenly, I restarted my laptop and every 30 seconds (ish) I get the dreaded "Windows Explorer has stopped working - find an online solution and restart the program or just restart the program. Whenever I click on restart the program that updates the Windows bar and I can use the start menu and the desktop again. I can't hide this message by moving on the side of the page - this allows me to continue with what is currently open (where the possibility to type this post without having to click on restart explore every 30 seconds.)

  If I click on "View problem details" I get this error:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: umebapuyuqiyuk.dll
  Fault Module Version: 7.0.5.8
  Timestamp of Module error: 4a60f951
  Exception code: c0000005
  Exception offset: 00022b 33
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  I tried to locate a file called "umebapuyuqiyuk.dll" but I can't, I don't have any idea what it is.

  We hope to help or give me some ideas to try.

  Thanks in advance Techies...

  Pedro.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the computer recently?

  Step 1: I suggest you to search for the dll file and rename it to umebapuyuqiyuk.old

  Step 2: Run the next Fixit and check if it helps.

  Problems with the overall speed of the system and performance

  Step 3:Check of the problem in a clean boot state. To do this, follow the link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start toreduce this imageEx

  type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click restart.

  Step 4: Check out this thread that might have a possible solution to your problem.

  Explorer Windows stopped working

  See also:

  Optimize Windows Vista for better performance

  Ways to improve your computer's performance

• Explorer Windows has stopped working when I try to open a folder

  When I tried to open a file under low load it stopped working. I use windows vista. I don't have windows installation CD because it was pre installed when I bought the laptop. I downloaded windows vista service pack. but the problem still persists. Please help me with solutions

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Explorer Windows has stopped working when I click on the start icon

  Gud afternoon, I have 2 problems.

  1 problem is inCD.exe (which i already clear it but sure my window stopped Explorer working Isit because of this problem stop does not work)

  2nd problem is whenever I click on the icon start at the bottom left and right now I move my mouse select the icon Any1... I had to have this word says

  Explorer Windows stopped working

  Explorer Windows restarts...

  And everything is empty unless I keep trying many times.

  It happen since last night until now.

  So far, I only download Call Of Duty: Modern Warfare 2

  ISIT there is Sthing wrong download this game?

  If someone knows how to Slove this... Please help me... Thank you very much

  Hello

  Check to see if the following is useful.

  Step 1: Run the next Fixit and check if it helps.

  Problems with the overall speed of the system and performance

  Step 2: Search for the issue in a clean boot state. To do this, follow these steps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the result of clean boot.

  Step 3: Check out this thread that might have a possible solution to your problem.

  Explorer Windows stopped working

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  I hope this helps.

  Kind regards

  Ramata Thakur.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Explorer Windows has stopped working the message repeated

  Whenever I click on all orders are left microsoft computer or less as a Control Panel icon, photos or music I get a message that says windows exploer has stopped working. I'm not trying to use the woindows Explorer so I'm not "understand what is happening

  Hello

  You can download this reg from my SkyDrive file:

  http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

  and double click on the file to import. If you are unable to do this, run regedit.exe and import the registry file here!

  When the Windows Explorer crashes, Windows Error Reporting Service [1] creates a dmp under C:\Localdumps. Please download the file to your public Skydrive folder [2] and post the link here. I take a look at the discharge with the debugger, maybe that I can see what Shell extension is the cause.

  André

  [1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx
  [2] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Explorer Windows has stopped working and then.

  Hi, I am new to PC so I don't know what the problem with my thing.

  There are 2 days I was closing my PC but the PC would shut down for 5 minutes and stay in office, after I received a message "Windows Explorer has stopped working" (while the message is pop up, my PC is slow and laggy as hell, it took me 2 minutes to close the message because the mouse was no lag and difficult to control) and then I closed the message Shut down PC normally. And the next day, my PC has become very lag (if I open 2 tabs on Firefox, the PC will freeze) even with the right button on a game on desktop icon, it takes 20 seconds to show me the option to copy or cut or ect... I tried to delete everything (games, yahoo, ect..) but the problem still there. I use Dell inspiron 14R with little window 7 x 32.

  If some1 has the same problem and fixed it please help me :(

  And sorry for my bad English

  Given that you had cracks and uTorrent there, it is very likely that the system needs a thorough cleaning. This forum is not implemented for this because newspapers can be quite long, and unfortunately, the Dell malware removal forum is closed.

  We can still help.

  My suggestion is to sign up for a free account and post a log HijackThis to SpywareHammer for trained security analysts can guide you through a few steps in order to get better performance. Please use the same username that you have here, if possible, so I can track your progress.
  Instructions for display at SpywareHammer are HERE.

  * Important!  Please include a link to this topic at Dell so they see what we have done so far. In this way, your help at the other site won't ask you to repeat the same analyses.

  Good luck! Let us know if this solves the problem.