Fading out / in a graph

Similar Questions

• Melted in an MC of the works, fading out is not

  Hello

  I can't work on why - but when I try to fade out the text (by calling fadeoutSecondText), text vanishes and then turns off immediately. Discoloration and struggle against each other, resulting in a flashing quickly text!

  Here is the code:

  I have a function to fade in SecondText, which takes place in 1.5 seconds after another clip is dimmed (called from * 1):

  function FadeInSecondLoad() {}
  TheCloud.SecondText._alpha += fadeAmount;
  If (TheCloud.SecondText._alpha > = 100) {}
  TheCloud.SecondText._alpha = 100;
  TheCloud.SecondText.onEnterFrame = null;
  clearInterval (myTimer);
  }

  ... and a SecondText fade function when a button is clicked (called from * 2)

  function fadeoutSecondText() {}
  TheCloud.SecondText._alpha-= fadeAmount;
  If (TheCloud.SecondText._alpha < = 1) {}
  TheCloud.SecondText._alpha = 0;
  TheCloud.SecondText.onEnterFrame = null;

  }}

  ----------------------

  (* 1)

  function fadeOutIntro() {}
  TheCloud.IntroText._alpha-= fadeAmount;
  If (TheCloud.IntroText._alpha < = 1) {}
  TheCloud.IntroText._alpha = 0;
  TheCloud.IntroText.onEnterFrame = null;
  }
  myTimer = setInterval (FadeInSecondLoad, 1000);
  }

  (* 2).

  cloudtopleft.onRelease = function() {}
  cloudtopleft.onEnterFrame = fadeoutSecondText;
  }

  Please let me know if this isn't enough information or if you prefer to see the. Fla.

  Thank you very much!

  probably your setInterval() to run only once (when the enterframe loop ends).  Move your function setInterval() in this conditional branch.

• My garageband suddenly started fading out

  So I recorded three different tracks.  The track of a guitar and two vocal tracks.  I worked a bit on it and everything seemed fine.  Then I started to mess with some settings, because I wanted to put some effects on the guitar.  And then I found myself accidentally clicking the 'duck' setting.  I immediately turned off.  Then I went to listen to return and at a certain point in the song, he begins to weaken and continues in silence and I hear nothing for the rest of the song.  I tried with my helmet and without and I hear nothing.  I also tried to adjust the Audio settings / noon and that did nothing.  I've also updated my computer hoping that would help, but again... nothing. PLEASE HELP SOMEONE.  I'm not bad with garageband, but I worked on this project for a while and I need to finish.  I hope someone can help.  Any help is appreciated.

  What version of GarageBand do you use?  GarageBand 11, version 6.0.5 or a different version?

  Since you have not mentioned it - have you checked on the automation curves track Master?  (Track > Show Master Track).  The main Volume should not melted.

  

  When you play a little with the effects, you did changes in the Panel for the MAster track effects?  In the tab 'change '?

• letters are partially faded out and very difficult to read

  I was playing arounf in display, change of office.  I have tried everything I can think in the control panel

  Hi juliemorrison,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Make Windows XP as you wish

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/personalize-Windows-XP

  Method 2: Do a system restore and see if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• I did a video clip on WLMM but I can't he cut as I can't use edit in the video tools, it appears, but it is faded out, so I can't click on it how do I

  I did my first video with lyrics on WLMM and trials and errors had my music on my background image and the words all in place.

  I can't understand how to cut excess (it shows that I have 63 min. When my clip is only 04:07. I clicked on the tools of video editing tool, but

  It is used as output when you can not use a toolbar... I don't know what I have to do to be able to use the trim on the video editing. What should I do?

  I need an answer as soon as possible.  Thank you for your help. I have Windows Vista.

  Hello

  You use Director of windows or windows live movie maker?

  If you use direct Director windows, then I suggest you to post your query from the link and check.

  http://www.windowslivehelp.com/product.aspx?ProductID=5

• where's my sound? It was extinguished, I clicked on the volume icon to turn it on and the missing icon. Can't find anywhere. His faded out in the menu of the taskbar and cannot get any sound

  I can't offer any additional information as above. One minute my volume icon was there, the next day it was gone.

  Hello

  ·         Are you able to hear the sound while playing music on the system?

  If the problem is only with the sound/volume missing from the system tray icon, then you can follow the steps mentioned below and find the volume icon in the system tray.

  To redisplay your volume icon in the taskbar

  (a) click Start.

  (b) in the search line type TASKBAR and STARTMENU

  (c) of the list of programs select bar TASKS and STARTMENU

  (d) select the tab area of Notification and under the system icons section, place a check next to VOLUME

  (e) click apply and then click OK

  It should be visible in the toolbar again.

  Please let us know if that fixes the problem or if assistance is needed.

• EventHandler: fading out before doing anything else

  Hello everyone

  I wish that the current page to falter before another html page is loaded in the browser when you click on a link button.

  
  So I guess that the handler must call an interpolation function, get information when the main movieclip alpha is 0 and then call the new URL.

  My wonder is how the Manager read the alpha value of the main movieclip until it is 0, so that it can act accordingly.

  In addition I don't know where to place the interpolation function, if it has to go in the document class, or in the AS3 of the button, which is on the timeline of the mc that contains the button.

  Thanks for your thoughts

  If you create an interpolation function, you can assign an event listener to the interpolation to listen for the MOTION_FINISH event and have this process of evolution to the new URL.  If you look in the Tween class in the help documents, you will find all the events that can be listened to.

• Need help fading out a sound object.

  On the first frame of my movie, I have the following text:
  
  mySound = new Sound();
  mySound.attachSound ("music");
  mySound.start ("", 999); starts the background music
  
  myVoice = new Sound();
  myVoice.attachSound ("voice");
  
  
  Later in the film, I have
  
  myVoice.start ("", 1); play the voices above
  
  
  
  
  Little followed in another setting of:
  
  this.onEnterFrame = function() {/ / assign melted on the onEnterFrame event code}
  Configure
  So = mySound; the sound object you want to target path value
  rate = 5; Choose the number between 1 and 100
  
  newVolume = so.getVolume () - rate; subtract the price of current volume
  If (newVolume > 0) {/ / or melted yet}
  so.setVolume (newVolume); the newVolume value for the volume
  
  } else {/ / full fade}
  so.setVolume (0) / / reset to 0 to prevent the negative values
  this.onEnterFrame = null; stop the loop
  }
  }
  
  
  When the fade the code runs, it performs as well fade background music and voice over. What I want is background music to falter while the voice more parts at full volume.
  
  
  Any help would be greatly appreciated.
  

  You must set your two sound objects on two different timelines in order to control them independently.

  the timeline that you designate in your new Sound() return. When you omit designation explicit timeline, flash uses the current timeline or:

• First broadcast 13 items under Windows 7 64 fading little problem to black at the end of the video.

  With 13 items first, on Windows 7 64 bit, I try to put an end to a video with a fade to black transition.  For some reason, it fades to black and then return.  Yes, I have tried all three ways, left and right between the two, but the computer keeps fading out and then in.  And yes the transition is at the end of the clip.

  morrisst

  I have the first elements 13 on Windows 7 64 bit.

  When I apply the video black Dip transition to the last video for editing, alignment is Clip on the left. You have been there and done that.

  You can post a screenshot of what you see when the Dip to black rocking stops on your Timeline?

  When I do as you suggested, I see this

  

  You've expanded the Timeline with the - + cursor above the timeline and inspect the end of the clip as well as

  another lead content above or below, you detect a fragments that could be a factor in what you see?

  If you start a new project, do you have the same result?

  Could you post a screenshot showing what you see with the Dip in the video transition black, placed at the end

  the last item on your Timeline (alignment: left Clip)?

  Thank you.

  RTA

  Add on... I posted this reply earlier today, but somehow the last part did not appear in the thread. So I am adding that now to the original content.

• Such a Simple after effects Question

  People, Im a beginner AE but addicted! I am trying to achieve something so simple but nonetheless the approach that I use, I can't get this working the way I want.

  This is my simple flowchart.

  All I want to do is display this graph on the screen, but with the opacity down so it appears like a faded out image.

  I would then like to fade in the upper area, but then the little tricky for me, then I want to "reveal the blue line connection in the following box. Simple you might say, I tried the masks of shapes with the edge effect, write it on I just don't seem to know the best way to go about this...

  Help would be gretly appreciated!

  All the elements on your chart should be on separate layers. You can reveal the blue line crossed out or with a mask of animation. You control the opacity with the opacity of each layer property.

• Don't print any black ink - HP OfficeJet 4620 - FIXED!

  When I replaced the black cartridge with a black XL version, it would not print.  I went on this forum and saw that some had problems and were unable to solve.

  I ran printing HP and doctor Scan and after cleaning the heads, EUREKA!  It works now!

  Good luck!

  UPDATE: actually, it didn't work.  Some impressions later the printer started doing the same thing - fading out for nothing.  I ran the doctor print again and it didn't work.  Resumes the cartridge and replace it with another 564 HP cartridge and IT is WORKING now!

• HP Pavilion x 360: micro does not always work

  Hello!

  I recently had problems with my microphone, which does not always work when using Skype. What is strange, is that sometimes it works perfectly, while other times that it is impossible for the other person to hear me. There is nothing wrong with the Wi - Fi connection while... Any ideas of what could be the problem?

  Hi @katarint ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion 360 and problems with the microphone and Skype fading out or does not. Hereis a link to download a new version which may help to solve the issue of the gradual estrangement. Please uninstall your current version and restart your computer before installing the new version.

  Here is a linkto Skype help under technical questions.

  I hope this helps.

  Thank you.

• gradual estrangement in white in the end

  does anyone know how to create a fading out in thin white?

  because I can't find it in the transisitions :/

  Thank you!

  Good day

  If you just want to go to white, but a white after the clip generator and cross dissolve it. If you want to go to the white between the elements, use the fade the color transition.

• Fingerprint HP scanner

  Hello

  I have posted before my fingerprint reader showed a critical error, and I received a quick answer that solved the problem here, thank you for that.

  It worked for a few days, without problems, but then all of a sudden it stopped again.

  Does not seem that he has the same issue tho, simplepass works, but the scanner does not seem to answer...

  Before he blinked a white or red when they are hit, now nothing and even trying to configure Windows config of fingerprints signed, cannot click on add, its faded out summer.

  Someone else has had the same problem, it is common, or simply part of aged 2 weeks of the computer has failed and needs to be replaced?

  Thanks in advance.

  Hello @Zsogal,
  
  I see that you have a problem with the fingerprint reader, that it does not react with the indication that he works. I will try to help you with this.
  
  Try the steps in this document: Troubleshooting a (Windows 8) fingerprint reader.
  
  It will basically cover what you can try, with the exception of test the real hardware.
  
  If the document does not solve the problem, I recommend then contact HP support.
  Technical support of HP, 1-800-474-6836 in North America. For all other regions click here.
  
  Thanks for posting on the HP Forums.

• simple DMA FIFO reading two analog channels

  Hello

  I have a question on a method of data transfer between two analog inputs for a simple DMA FIFO in FPGA. The code is described here: http://decibel.ni.com/content/docs/DOC-6303. If I use this method, and I got out in a graph of my host VI, the calendar in the graph reflects the same schedule as the signals that have been entered? Or will they be phase shift between two signals?

  Thank you

  Grant

  Grant:

  Because it is not all information of timing with the signals in the FIFO, there will be no lag phase on the chart.

  Hope that helps. I would like to know if I forgot something, or who does not explain very well.

  Thank you!