Failed to load all the themes!

Similar Questions

• Not able to load all the applications at the start?

  When I restart my window, it will fail to load all the apps and constantly hear a click click of hard drives

  After reboot XP several times, I get a message as follows

  Playing a disc error has occurred

  Press Ctrl + Alt + Delete to restart

  After that

  NTLDR is missing

  I install XP on drive C and all applications on the D drive, how can I know which drive to get error?

  When I go into my BIOS and see my drive C is not detected.

  To make a virus? or hardware fails?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Looks like your drive is toast. The clicks that you hear, it's very likely the arm broken in the hard drive.

  

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• Why doe iPhoto want to load all the pictures my camera took ever when I want just to upload 3 photos?

  Why doe iPhoto want to load all the pictures my camera took ever when I want just to upload 3 photos?

  I have just three pictures I want to load my usb for my macbook camera style

  Hey FYI Apple

  Where is edit?

  This is how it should look.

  Why does he want iPhoto to load every photo, my camera never had (since the update) when I just want what he upload 3 photos?

  I have just three pictures I want to load my usb for my macbook camera style.

  The camera has only 3 pictures on it, but iPhoto seems to have a memory of each photo, that I took because I've updated to the latest iPhoto and it wants to load on the page which is for the camera.

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc

• Windows failed to load because the system registry file is missing or corrupt. - status0xc000014c (Windows vista}

  Windows failed to load because the registry file is missing or corrupt... status 0xc000014c

  Hello

  1. have you made changes on the computer before this problem?

  2. are you able to boot mode safe?

  I suggest you perform System Recovery Options startup repair and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For more information, see the following Microsoft article.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope the information is useful.

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• All of a sudden my Elements 7 won't load all the video files not saying not supported

  Suddenly my Elements 7 won't load all the video files saying not supported, I rebooted, uninstalled and reinstalled but it refuses to work any ideas please

  If you are video comes from a Hi8 camcorder, then it is analog, which has been digitized. And how and what facilities allowing you to scan this video may be important. But, since you say that you have changed this video before in Premiere Elements without a problem, I'll assume this isn't the question at the moment - although it could certainly be. Especially since you use a such relatively old version of Premiere Elements, one that requires you to manually configure your project.

  In fact, try to download the trial version of the latest version of Premiere Elements and see if you experience the same problem. The current versions of the program are many more automatically and are capable of managing a much wider range of video file formats. You don't have to buy the program. Just try free trial and see if you still experience the same problems.

  If nothing else, install the trial version 14 version COULD even repair what has been damaged in your codec library, if that's your problem in version 7.

• How to load all the data without uncheck Journalized data only option?

  Hi all
  
  Currently, I have configured an option only logged data for many game data and interface.
  
  But I need to load all the data (once) without clear logged Data Only. After that it will work with the CDC.
  
  Please help me on this.
  
  ARO
  EBA

  Hi Eba

  Another way is to copy the source data to another table (two copies).
  If you have 10 source table and then create another 10 tables in doubles in the backend.
  Now truncate these original paintings. Then insert the data in table duplicated in the original table. Now CDC will detect these are inserted.
  But I guess you have more than 300 paintings, which is again difficult to manage.

• 'Library not found or failed to load' on the other system

  Hi all

  I searched a bit on the forum and found similar problems, but not really a solution. So I'll give a try with this post:

  I have two similar computers: Windows 7, 64-bit, Labview 2011 (service pack 1) is installed.

  And the goal is to acquire images of an acquisition card BitFlow.

  BitFlow software provided for the frame grabber, which has been tested for windows 7, 64-bit and Labview 2011. With a machine (machine A), the program works very well. No problem.

  On the other machine (machine B), Labview is unable to read the supplied library: after selecting the library in the library function node call, Labview gave the error 'Could not be found or failed to load library' on the node library function call.

  Machine b - in all my knowledge - the same configuration of all software compared to a machine, so I don't know what the problem is here. The only difference is that machine B has a different computer security protocol - but it has administrator rights...

  In addition, I tried a stand-alone executable file (and the installation program) who worked on a third computer, but not on the machine B - because of the same problem.

  Does anyone have an idea what direction am I looking for the solution? Or what may be the problem? Or what I'm missing here?

  Let me know if you need any additional info.

  Best regards

  Michael

  Haverdings wrote:
  "Library could not be found or failed to load." I guess this would mean a "failed to load" error (because the library is present), but I don't know that the 'fault' it is.

  Bitflow is installed by simply copying the files on your computer. No installer is required - even though they claim. Is there a way to check if the required version of the C runtime is used?

  Thanks for the replies

  Well, then the message could be more developed and make a difference file not found explicitly and not being not able to load, if LabVIEW would make some extra humba mumba woodoo, that's exactly what Windows shows a request when he tries to load a DLL. This code error, simply said, sorry, I could not load the DLL and that could be because it does not exist, but also because I couldn't load it for other reasons, such as the missing dependencies, (a corrupted OS or anything else). Not very useful to you, and I don't know LabVIEW must try to be smarter than Windows here, trying to see if the DLL actually existed. For all it's worth can be a text file or what is not a DLL, the DLL name!

  An interesting read that actually explains the problem a little more can be found here. You see that it isn't a problem of LabVIEW but just about anyones problem faced DLLs that can go just about anywhere.

  The best way to see what your DLL dependencies, is to charge with the program of the mentioned dependencies in this viewer. He has problems it is today on Windows 7 systems, but still can give you some useful information.

• Windows Vista does not load all the black white backlit display.

  I'm repairing computer of my aunt. It's a laptop gateway M-6320. Windows Vista. It loads the bios and goes through the MAIL. After the POST, it just goes to a screen backlit black white with no mouse and nothing happens.

  Tried to change the boot order to boot from the cd first and put the disc of windows 7 in to run a repair (I don't have a vista cd), but it does not always load. everything sounds like it turns on and works fine. the dvd sounds like it runs for a few seconds. I also tried to boot from usb with windows 7 there. still won't load what it is. I took out the battery tested cmos it is 2, 5V. I think it was. still nothing. I left the computer for a whole night. still nothing. I changed the hard drive even though it sounds like it's working. still nothing. I even tried a windows xp cd in the freak chance, it was a bad cd. and nothing is connected to the computer while I'm trying to start. He's not going for advanced options or to try safe mode.

  I also tried to put the memtest on USB, but it will not load anything from him even with usb as the first boot option. and I tried different usb drives also.

  I can't figure what's wrong... my only thought is that the bios is corrupted or the RAM is bad. Anyone have any ideas? Oh and the bios is Phoenix

  Hello

  Since you've already tried all the troubleshooting steps, including booting from a Windows 7 disc to repair the Windows installation. If all else fails, then I think that
  It's a hardware problem. I suggest you contact the manufacturer of the laptop computer or take it to a tech store to get help.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit ourMicrosoft answers Feedback Forum and tell us what you think.

• Random reboots and crashes with WUDFRd failed to load of the device

  I get random reboots and falls down and receive check the event viewer I see this -.

  event 219, kernel-PnP

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_USB2. 0 & PROD_CARDREADER_CF & REV_0100 #606569746801 & 0 #.

  well if anyone knows what it is?

  Your problem is unlikely to be associated with the event ID: 219, which warns a driver did not load. In fact the driver load a few moments later and the portable device then works.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm