Fax failure

Similar Questions

• Fax failure - can't send or receive faxes

  HP Officejet Pro 8600

  I started to get this message... fax failure that is impossible to send or receive faxes

  The phone line also makes a busy signal.  When I unplug the fax machine from the wall, my telephone system is no longer occupied.

  If the port is damaged or can I somehow fix it.

  I tried all the solutions written.  Only, I went out and bought an EPSON Workforce 3640.  It works very well... Also, I get telephone assistance even when it is out of warranty.

  I'm done with HP for now.

• OfficeJet J4680 fax failure - need some tips from a pro!

  I have an OfficeJet J4680 and has a few problems. I send a daily fax for a number, and sometimes it sounds as if she's going through, but then the note of fax has failed is displayed. The Party on the other line said fax machine NOT ring although I distintly hear 5 rings, and then a noise indicating it connected.

  Also, sometimes there is a fast busy signal and of course, this does not work as well. I am told that I am the only person having problems sending their number. And some days, it works perfectly.

  I ran a Test Fax Rport and everything. Any suggestions?

  Hi Mylan,

  This looks like a problem on their side. Use the Service of fax HP Test to test your Fax to send & receive faxes.

  HP has a number of Test Fax Service to test fax HP products. It is available in the United States only. The telephone number for this service is 1-888-HPFaxme (1-888-473-2963). The fax service receives faxes and returns faxes within 5-7 minutes to the number in the fax header. Note: You must ensure that you have your fax header completely filled in with name and fax number or you will not get a fax back service.

• Understand fax failure oregano and corrects the prejudices of the solution or alternatives

  I have problems sending a fax failed after that analyses a number of revenue and then transfer them into a MS Word Document in a Word format. I have some basic questions based on fax trying to figure why faxes fail and how to prevent them from doing.

  Using Microsoft word 2007, running Windows 7 on my model # KN904UA #ABA HP Pavilion dv9700 notebook PC computer phone fax on a color HP LaserJet Pro CM1415 MPF series all in one printer. I tried faxing multiple documents several times to see that it gets to the next to the last page and fails. These documents are 15, 18, 19, and some even 21 pages long. And I wonder if one of the following solutions would work, tell me what you think? 1. cut the faxes in the half and passing the final part of the fax only, 2. By saving the document faxes in PDF and fax to PDF MS Word verses. 3. selection of the target destination Fax either from the AddressBook menu Fax (before frequently used saved fax number), or the fax number entering manually every time when sending a fax.

  Can someone help me answer a few basic questions base of fax or understand why they fail? :

  If I save a document in Word, click on print, choose to fax in the print options, the fax saves the file in the memory of the coil first before, it fires the fax process to start fax? In the affirmative when the file is saved in the coil of the memory, can I turn off my laptop and then the fax will continue Fax fax fax memory of coil? The fax data transfer rate is equal to a 14/4 Baud rate modem?

  I can't fax anything longer than 10 pages. A 21 page document must be divided into 3 segments: name 1 file name page, page 2, and page 3 of the file file name.  I hope this helps others with the same problem and inquierrie. Chris

• I have a FAX failure on is not the use of the telephone cable provided.

  I have a printer HP Officejet Pro 8600 N911a. I get a 'fail', even when I use the supplied telephone cable?

  Hi Tony,

  See the following link, it contains troubleshooting you should do to solve this problem:

  http://goo.GL/cfg5x

• HP photosmart 7520: HP photosmart 7520 fax: failed the test on status of fax line

  HP photosmart 7520 fax not only the 'fax line condition test', indicating the fax line has a weak signal.  Bouquet of use digital AT & T with a telephone line.  AT & T verified digital line and was OK.  Read an answer from FAQ indicating a test line fax failure condition may be due to a digital line vs a line analog and a digital filter can be a solution.

  Is there another solution in addition to the digital filter solution?

  Thanks, UnitLeader 2

  Hi UnitLeader2,

  Thank you for reaching out to the HP Support forum with your request by fax.

  I understand that you have a 7520 Photosmart of HP printer e-all-in-one that does not respect the line the condition test fax, even if AT & T checked and said it was OK. I would like to help.

  Here is a support document which deals with the types of telephone lines different and various options - using an HP all-in-one or a product of Fax on a PBX, ISDN, or DSL phone systemof configuration.

  I don't know if they do it, but you could see if your provider offers a voice over IP service (VoIP). Here is a document of support, you can view - Fax with VoIP Services.

  Please let me know if that solves the problem, or if you need assistance.

• M277dw MFP: Error Message "No. Fax detected" on the incoming-outgoing fax works fine

  I have the M277dw MFP for my small business. I have a phone line for faxing. I can send outbound faxes without problem. I can not receive incoming however. I receive a confirmation by fax with a result of "No fax detected". I ran several times self-diagnosis and the machine always says all systems are good.

  Hi brain2900,

  Welcome to the HP Support forum.

  I understand that you have a printer HP Color LaserJet M277dw MFP Pro you are able to send faxes with, but unable to receive faxes even if all goes on the fax test. I would like to help with that.

  Fax reception problems are caused more by telephone line conditions. Several telephone companies offer services which are intended to warn you of the voice mail during a call or prevent unwanted calls. These services can block calls or interfere with the transmission by fax and cause the fax failure. If there is any of the following services on the telephone line connected to the printer, contact the telephone provider for the recommended solution.

  -Answering machine

• OfficeJet Pro 8615: Fax a lot of page at a time

  I used my all-in-one for faxing several times beautifully, but when I need to send a response to an offer of our agency of 33 pages, I guess it was too much to do at once, then divided into two separate Fax. The first batch was 16 pages, but stuck on page 3... error message is no longer received a link or something similar. Tried 3 times separate as this was going on in his Inbox e-mail rather than fax equipment, wasn't sure if it was on his end. In the end, to consider somewhere and pay $33 to get it sent in time and he knew very well. Argh!

  There are a limited number of pages that can be faxed at one point?

  Was it because of printing extremely detailed on these pages?

  There will be more fax regarding the sale of our home and would like to know for the future.

  Thank you very much for any assistance and light any which can bring on this issue!

  Hello @Happpy1,

  Welcome to the Forums of HP Support!

  I understand that you are having problems then to fax multiple pages on your HP Officejet Pro 8615 e-all-in-one printer to your real estate agent. I would like to work with you today with the resolution of this problem.

  According to the specs on your machine management document, found here, your machine is able to contain up to 50 sheets at the same time in the bin. Therefore, if you have important faxes which lie in the ability of 50 pages, you should have no problem loading all pages at the same time and faxes.

  Regarding the question of the communication that you guys met, Fax is old analog technology. Today, the telephone companies offer digital lines. Digital lines are OK to use, but it is much more static noise and interference on these lines which can cause faxes sending and receipt of the questions. If you are unable to fax to several numbers, except one, chances are he may have had an additional inference between your two fax machines that caused the fax failure. The only time where a fax should go to a mailbox is also, if the real estate agent is to use eFax service. eFax is email fax and is something that the Realtor would have subscribed and paid for. It allows faxes go to your email rather than a real fax machine.

  One thing we can do to avoid potential future fax communication problems, would be to change two settings on your Fax. Please follow the steps below to change the settings of two.

  • Set the fax speed:

  Because the digital telephone lines transmit packets at a pace much faster than analog telephone lines, there is a chance that your fax speed may be excessive and these facsimile information packets are lost. This packet loss would result in an incomplete fax, or failure of the fax. I'll have reduce you your speed of fax for testing purposes. If the fax speed does not resolve the problem you can activate it back up to medium.

  1. Press the power button to turn on the printer, if it is not on already.
  2. On the printer Panel, drag the screen to scroll to installationand then press the installation icon ().
  3. Press Setup Faxand then on Advanced Configuration of Fax.
  4. Touch Fax speed.
  5. Touch slow.
  6. Tap the home icon () to return to the main screen.
  • Disable the Mode of Error Correction (ECM):

  Error Correction is normally activated. If your machine detects noises static or interference on the line the fax machine to fail. I'll have you turn off this feature to force your fax to go through, even if the interference is detected.

  1. Press the power button to turn on the printer, if it is not on already.
  2. On the printer Panel, drag the screen to scroll to installationand then press the installation icon ().
  3. Press Setup Faxand then on Advanced Configuration of Fax.
  4. Select the Mode of Error Correction
  5. Press OFF
  6. Tap the home icon () to return to the main screen.

  Once these parameters have been adjusted, try it please send a fax to your real estate agent to see if the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• OfficeJet 6700: HP Support Assistant messages will not delete

  On my taskbar, the HP Support Assistant icon has a yellow triangle.  When I open the Help Assistant, I see three messages.

  A message is on one out of question paper and paper for my printer power supply problem, the second is on HP printers cannot send or receive faxes, and the third is close to the fax failures.  All messages have been read, and then I click on the trash can icon to delete the message.  I get a message indicating that I have no messages, but does not have the yellow triangle.  I close the wizard for help, and the yellow triangle still does not go away.  Next time I open the wizard using the same three messages are there again.  How can I get rid of these messages other than the wizard for help uninstalling?

  I don't feel the problems mentioned in the messages.  I sent a fax this afternoon without any problems.

  Gary

  Hi Gary,.

  Did you follow the following steps?

  http://support.HP.com/us-en/document/c03467905#AbT4

  You see the symbol X as described? (as you have description seems different from that described by the article)

  You have the latest version of HP Support Assistant installed?

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html#.V6wFZa0ht_l

• How can I reset my hp officejet 6500 e709n all-in-one

  Receive Fax failure, impossible to send or receive.

  Had this same problem a few months ago and HP support had me reset the printer to resolve the issue.

  Printer is no longer under warranty and I have not saved the info on how to reset the printer.

  Thank you.

  You always remember that you hold down the # and number buttons 6 on the printer to perform the reset that support the cat HP told you before?

• failure to scan, copy and fax for HP Officejet 4500

  I'm trying to scan with my HP Officejet 4500 and it is not allowing me to do. When I turn on the printer it says "failed to scan. "Cannot scan, copy or fax. When I try to scan, I have the wireless option to send it to my computer and when I choose my computer, nothing happens and it takes back me to the scan, copy, fax menu.

  I tried installation and resettlement and unistalling too many times. I also unplugged all the wires. Nothing works. I had problems with this mutiple printer and it is not even a month. How can I solve this problem.

  I'm afraid that the error you are getting means that the firmware is glitched, or the scanner lamp is out. If the firmware is glitched, the printer might actually be fixable, but if the scanner lamp is out, there is no much you can do. The document below will take you through a few steps to try. If this does not work, try to do a partial reset. If nothing works, you need to replace your printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

  A "Failure of the Scanner" Message appears on the all-in-one control panel and you can not scan, copy, or fax:
  http://goo.GL/KULAv

  To make a partial reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5 connect the power supply cord inot the wall, but do not connect the printer.
  6. press 3 and # buttons.
  7. while now buttons, plug in the printer.
  8. when the lights come on, release the buttons.

• LASERJET PRO 200 COLOR MFP fax of failure?

  I bought 200 COLOR MFP LASERJET PRO but I don't see any failure of fax for each fax sent. This option is to go to the menu fax and printing various reports from there. I was wondering this adjustable device upward so it prints fax delivery report after every fax sent?

  Hi bananko,.

  Welcome to the HP Forums.

  I see you want to receive a confirmation by fax for faxes.
  I'll be happy to help you.

  What is the name and the product number of your printer? How can I find my model number or product number?

  You have the printer Laserjet 200 M276?

  If you have a different model, let me know.

  Here are the instructions for the M276.

  Touch Menu Fax icon on the printer screen, select Fax, Fax of Confirmation reports. You can change the settings to receive a fax confirmation after every fax sent.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great day.

• OfficeJet 4500 G510n-z: failure sending a fax from Word G510n-z

  I use a laptop Toshiba Satellite running Windows 10 with, AFAIK, updates. I am trying to send a Word document by fax to my connected OfficeJet 4500 wireless. The printing process works, I get the dialogue Send Fax, I dutifully fill. The document goes to the queue from print, then disappears. The printer is not composing or anything; the document will just in the bit bucket, without error, not even in the case log.

  Other relevant details:

  • I tried reinstalling the drivers; After several hours the skin of HP software, I did.
  • The laptop has 3 printers associated with my physical device: 2 printers generically named ' HP OfficeJet 4500 G510n-z ' and ' fax HP OfficeJet 4500 G510n-z "; and "HP # (HP OfficeJet 4500 G510n-z) ' (where # is a hexadecimal number of device-specific, I'm not willing to share here). The third argument prints correctly to the book.
  • I can scan documents through the HP Support Center application.
  • Copy and fax work correctly to the device itself. For example, if I have first print the thing, I want to fax, then by fax using the document feeder and the front of the device, it connects and sends the fax correctly.
  • The last time I checked, I was able with a fax in a program on my archaic Macintosh.
  • To repeat the foregoing, no errors are displayed or saved. Each attempt appears in the Fax as "Completed." log I don't want to get all the answers canned on the subject, thank you very much.
  • I browsed this forum of the community and support site and tried what I could find and understand how to do in Windows 10 of bugs. (Disclaimer: I've always been a Mac person and a VMS/Mac/Linux software developer, to try to understand how to do something which expected to be simple in Microsoft mess was not easy for me.) It is not suggested with a laptop given to his wife by a friend, however.)

  What unconscious thing [sic] I'm missing?

  Hello

  Please, look at the next post and make a good choice:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

  Kind regards.

• Officejet HP6700: HP6700 Scanner failure: unable to scan, copy or fax

  This morning my 6700 Officejet come with failure scanner error message on his screen and refused to do anything.

  I tried the method on the suport online - remove the power cable when he was conducting and the checking of the firmware, but no joy.

  It happened that we had bought an another identical Officejet a couple of years, so I plugged that is placed. Everything was fine and I printed a document, but now this evening, this one has the same error message. I tried the solution again and checked that the drivers are up-to-date (which they are) but not joy.

  Help! (please)

  Nothing has changed on our Setup - BT wireless broadband, computer Pavilion 23.

  Hello

  Please try the steps below...

  While the printer turned on, unplug the power cord from the back of the printer. Wait 60 seconds. Plug the power cord printer directly to a wall jack (bypass surge / power strip) and then to the printer.

  Open the scanner cover, and then press black COPY. Check if the scan transport moves and it's on. Transport scan is not turned on or move in all, then its time to replace the printer.

  Call the HP Technical Support for assistance. 1-800-474-6836 (USA)

• my HP officejet 4500 Wireless has problem "FAILURE of the SCANNER. UNABLE to SCAN, COPY OR FAX SEND"help!

  Help, please... I bought the printer on May 1, 2011, (a year ago) and now I am facing problem of unable to scan, copy and fax. Help, please. Thank you

  Hi trebreklaw,

  Download and install the full software functionality from the link below.

  Driver and HP Officejet Full Feature software